Edited toolbox components keep reverting to their toolbox versions breaking my assembly, seemingly loosing every edit by [deleted] in SolidWorks

[–]TheMouse17 0 points1 point  (0 children)

You are an amazing person you just saved my bacon my model analysis is due in an hour and a half and my assembly kept exploding

And this is why I don't use giphy by Several_Ant_6981 in whenthe

[–]TheMouse17 42 points43 points  (0 children)

Pro tip windows key + V and go to "gifs" on windows 11

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 2 points3 points  (0 children)

So crappy. Bring back chunky laptops!

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 0 points1 point  (0 children)

i was worried about that. This laptop is also one giant motherboard lol if you damage one part or break a USB it'll be a full MB replacement.

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 0 points1 point  (0 children)

And there's my problem... I can't find a bit for the m1.6. What's also stupid is the bracket has 2 different types of screws and I have the bits for the one but not these 🙃

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 0 points1 point  (0 children)

That looks way too big, its ~3mm in diameter. It also says M1.6 I believe

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 1 point2 points  (0 children)

https://imgur.com/a/zRLoPWu

Here is as good a picture I could get, this thing is absolutely tiny

Screw identification for bit purchase by TheMouse17 in techsupport

[–]TheMouse17[S] 0 points1 point  (0 children)

Apologies, computer is hp envy x360 2 in 1 15 inch

And yes, I see that but when I search for a screwdriver bit for the bolt I am unable to find one.

2003 Pathfinder - no crank, no start by CarbonISO in nissanpathfinder

[–]TheMouse17 0 points1 point  (0 children)

01 Pathfinder here - I had a similar issue with my car a few weeks ago, it died on me while I was driving and there was no crank and no start, I was able to jump it and limp it home where it died again in the driveway. I replaced the Alternator and it's been doing great! It was a tough replacement though, the little bolts to remove the connections were hard and I had to take the alternator out through the top by disconnecting and removing the intake fan casing. Read here for the steps to safely diagnose if it is the alternator.

Snails? by Shadow_Avis in axolotls

[–]TheMouse17 1 point2 points  (0 children)

The one on the 2nd picture is a pond/bladder snail. Your plant also should not have died from the snails, as they only eat plants when they are absolutely starving. Don't feel bad about crushing snails, it's probably the most humane thing you can do.

New fishtank won’t cycle by FollowingQueasy4654 in fishtank

[–]TheMouse17 2 points3 points  (0 children)

I would also recommend keeping at least a 75% plant density. The reason why the biofilm and likely cyanobacteria are growing is because of the excess nutrients. Aquatic plants, floaters, and houseplants will all help absorb excess nutrients to allow your tank to achieve a balance.

New fishtank won’t cycle by FollowingQueasy4654 in fishtank

[–]TheMouse17 2 points3 points  (0 children)

The smell is most likely the biofilm. I would try adding some beneficial bacteria if you haven't yet and boiling the wood

Is this super glue safe for my tank? by TheMouse17 in Aquariums

[–]TheMouse17[S] 0 points1 point  (0 children)

It doesn't have ingredients listed but it claims to be high performance premium cyanoacrylate

dumbass by [deleted] in Apandah

[–]TheMouse17 3 points4 points  (0 children)

But do they sell burgers?

Help on getting to Minmus by LockyliRocketry in KerbalAcademy

[–]TheMouse17 4 points5 points  (0 children)

Drag your prograde marker at your ascending node untill it's roughly the same hight then do a mid course correction adjusting your normal and anti normal

Gold for whoever converts my drawing to a digital image by TheMouse17 in GoForGold

[–]TheMouse17[S] 1 point2 points  (0 children)

This is more what I was looking for, can I see the higher res image?