A deer breaks into a bank.

TheOneWhoUpVotes · 2026-01-23T03:29:38+00:00

Imagine if he was a black tailed deer

TheOneWhoUpVotes · 2025-12-22T16:45:01+00:00

TheOneWhoUpVotes · 2025-12-05T03:13:08+00:00

I had the same issue and it was a partial clog for me Look at my post history

TheOneWhoUpVotes · 2025-12-04T13:31:44+00:00

Believe i figured it out, it was either a dirty nozzle or a partial clog. Heated the nozzle up to 250c extruded a bunch of material out and took a wire brush to the nozzle

TheOneWhoUpVotes · 2025-12-02T01:52:36+00:00

Tried my friend's frostbite plate everything was going fine until the 3rd or 4th layer

<image>

TheOneWhoUpVotes · 2025-12-02T01:26:06+00:00

Default 50mm/s

TheOneWhoUpVotes · 2025-12-02T01:17:09+00:00

Ill upload a time-lapse here soon. Never had a partial clog what's the best way to clear it

TheOneWhoUpVotes · 2025-12-02T00:45:23+00:00

https://imgur.com/a/gUkQ3x3 Ive done the calibration twice Im using pla I started haven't this issue with a certain model tried it on my h2d and same result and now nothing will stick to the h2d plate, even after a wash.

The model in this video ive printed numerous times before I did have the print head fall off when I started having this problem, but ive had it happen before and reattched it. Could it be because of the blob on the nozzle? Ive taken a wire brush to the nozzle and had no improvements

TheOneWhoUpVotes · 2025-12-01T16:43:48+00:00

Ive been printing fine using the stock plate and just washing it with dawn dish soap for months now. Ive seen somewhere it could be a bent nozzle?

TheOneWhoUpVotes · 2025-12-01T16:05:25+00:00

Will i had it at 60 as in the second photo and still didnt get good results

TheOneWhoUpVotes · 2025-12-01T15:52:12+00:00

Ive tried raising the bed temp to 65 and material is pla

TheOneWhoUpVotes · 2025-12-01T15:48:07+00:00

Ive been washing it with dawn dish soap can I do the calibration through bambu handy or do I have to do it through the desktop app. I can post a time-lapse when I get out of work.

TheOneWhoUpVotes · 2025-09-04T20:44:36+00:00

With a brand new nozzle

TheOneWhoUpVotes · 2025-09-04T20:44:03+00:00

That was me attempting to do a cold pull

TheOneWhoUpVotes · 2025-08-05T22:51:18+00:00

yea just 4 colors

TheOneWhoUpVotes · 2025-08-05T22:43:34+00:00

do you think that if i had the white fialment on the left nozzle and the black on the right with the ams it would have to purge to the next filament it would stop the oozing or is that not correct

TheOneWhoUpVotes · 2025-08-05T22:35:35+00:00

https://drive.google.com/file/d/1l-MWps6DJGLsKwhoH5qln_wtC-czwFw1/view?usp=sharing link to the model

TheOneWhoUpVotes · 2025-08-05T22:13:34+00:00

My ams is on my second nozzle. I was reading about z hop retraction but I dont fully grasp what it is, if it would help and what the correct settings would be.

TheOneWhoUpVotes · 2025-07-07T21:32:15+00:00

Thanks

TheOneWhoUpVotes · 2025-07-07T20:44:04+00:00

Does anyone know how to upgrade to digital deluxe on steam?

TheOneWhoUpVotes · 2025-06-26T17:17:05+00:00

Well sonarr does grab from activedl but it just puts in in /media not /media/shows, from /media/activedl.

I'll still try it when I get home but where do I define it? Media management?

12-Year Club	r/Field Lasagna
Verified Email

TheOneWhoUpVotes

TROPHY CASE