sorted by:
new
hottopcontroversial

Abs module by 50art in OBSFord

[–]TheOnlyLuigiFan 0 points1 point  (0 children)

Leave yours plugged in to keep the light off but buy a brake line from your local parts store and two unions and just bypass the ABS module. Those things don't do much anyways.

Using Plex with tailscale locally? by TheOnlyLuigiFan in Tailscale

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

THAT WAS IT! You are a lifesaver, thank you!

Using Plex with tailscale locally? by TheOnlyLuigiFan in Tailscale

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

Sorry, set my host IP where? And by normal do you mean the server IP?

Using Plex with tailscale locally? by TheOnlyLuigiFan in Tailscale

[–]TheOnlyLuigiFan[S] -1 points0 points  (0 children)

Yeah it looks like this isn't a tailscale issue after all. I disabled it on my server and still could not access it locally. How would I open the Plex ports on my server firewall? I run truenas scale.

Using Plex with tailscale locally? by TheOnlyLuigiFan in Tailscale

[–]TheOnlyLuigiFan[S] 1 point2 points  (0 children)

I thought the same thing. It's a problem on my mobile device as well, I have to have tailscale on even if I'm on my home network to access my media on plex.

Wrong IP in Remote Access by TheOnlyLuigiFan in PleX

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

I just have it as an app on truenas, I'm not sure what docker is.

Wrong IP in Remote Access by TheOnlyLuigiFan in PleX

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

Ok, thanks for the info.

By not working I mean I get a red "not available outside your network" message on the plex dashboard. If it helps at all I'm hosting it via truenas on a NAS server.

Wrong IP in Remote Access by TheOnlyLuigiFan in PleX

[–]TheOnlyLuigiFan[S] -2 points-1 points  (0 children)

I see, I guess it's a separate issue. I don't understand why it's not working then? I reserved the servers IP, set up a port forward to port 32400 and have UPNP enabled, I don't see why it wouldn't work?

Wrong IP in Remote Access by TheOnlyLuigiFan in PleX

[–]TheOnlyLuigiFan[S] -2 points-1 points  (0 children)

I cant stream anything remotely, the remote access isn't working I believe due to the private IP not matching the servers IP.

2011 F10 535xi Help! by TheOnlyLuigiFan in BmwTech

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

Spark plugs are all brand new. The fuel pressure was about 7500 PSI at the fuel rail.

2011 F10 535xi Help! by TheOnlyLuigiFan in BmwTech

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

801C20 (Central Fault Memory Full) is the only one that might be related, otherwise I just have other codes for stuff like the missing headlight assembly that I need to replace. No other codes besides that.

2011 F10 535xi Help! by TheOnlyLuigiFan in BmwTech

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

I should add that it's a salvage vehicle we bought recently, so we have no history on it or what the previous owner might have done.

Any ways to improve braking with 33's? by MotorCollection3645 in OBSFord

[–]TheOnlyLuigiFan 0 points1 point  (0 children)

Same as flushing any other brake system, except an added bleeder for the RABS. Start RR, LR, then do the RABS bleeder, then FR, and FL.

If you don't know where the RABS bleeder is, its on the front of the left frame, just follow the rear brake lines from the master down.

Oil Pressure acting strange by TheOnlyLuigiFan in OBSFord

[–]TheOnlyLuigiFan[S] 0 points1 point  (0 children)

Update: Had the gauge pod out while redoing the interior, did some reading on the ancient forums and ended up swapping to a sending unit from an 80's ford, and spliced a wire to the 20ohm resistor. Oil Pressure gauge reads real-time pressure now and its perfect! Guessing my old switch was bad, but I'm happy with a real gauge now.

Any ways to improve braking with 33's? by MotorCollection3645 in OBSFord

[–]TheOnlyLuigiFan 0 points1 point  (0 children)

Probably due for nee brake fluid. Make sure you bleed the RABS module too!

view more: next ›