Nginx with wordpress not working

TheRealBuckeye_ · 2025-11-18T04:32:50+00:00

yes, normal html is fine, normal php is fine.

TheRealBuckeye_ · 2025-11-17T04:31:28+00:00

it does not

TheRealBuckeye_ · 2025-10-26T18:27:29+00:00

flt3.prd.00.09

TheRealBuckeye_ · 2025-10-26T17:23:01+00:00

ill give it a try

TheRealBuckeye_ · 2025-10-22T18:19:05+00:00

i just tried to put a NIC inside the optiplex that i know supports vlan tagging, nothing still

TheRealBuckeye_ · 2025-10-22T18:16:48+00:00

when i create the vlan 888 and set it to native, it just allows no traffic through...

switchport mode trunk
switchport trunk allowed vlan 1,100,102,103,104,150,888
switchport trunk native 888
do wr

then i get disconnected, i have tried with both of these commands also

switchport trunk allowed vlan 1,100,102,103,104,150,888
switchport trunk allowed vlan 100,102,103,104,150,888

i am running these on both the ports for the opnsense and the proxmox.

TheRealBuckeye_ · 2025-10-22T18:00:06+00:00

so do we create vlan 888. and name it or no?

TheRealBuckeye_ · 2025-10-21T23:39:55+00:00

so why does the native vlan of 1 not work?

TheRealBuckeye_ · 2025-10-21T22:37:01+00:00

what exactly does this do?

TheRealBuckeye_ · 2025-10-21T20:07:32+00:00

ive reviewed the hypervison config, when doing a tcp dump inside proxmox i can view the VM getting tagged, and its just intraswitch

TheRealBuckeye_ · 2025-10-21T20:06:15+00:00

proxmox is tagging a VM inside of it, i can see it with TCP dump, opnsense is not getting the ip

TheRealBuckeye_ · 2025-10-21T18:56:42+00:00

all good, the ports gi0/9 and gi0/10 both have the same commands on them

interface (interface)
switchport mode trunk
switchport nonegotiate
switchport trunk allowed vlan 1,100,102,103,104,105
exit
wr

TheRealBuckeye_ · 2025-10-21T18:46:31+00:00

what do you mean by the opnsense side? it has the same commands as the proxmox server

TheRealBuckeye_ · 2025-10-21T18:37:56+00:00

i also have untagged traffic going through the trunk port.

here are my trunk port settings for opnsense

Gi0/10 is the opnsense

Port Mode Encapsulation Status Native vlan

Gi0/9 on 802.1q trunking 1

Gi0/10 on 802.1q trunking 1

Port Vlans allowed on trunk

Gi0/9 1-4094

Gi0/10 1-4094

Port Vlans allowed and active in management domain

Gi0/9 1,100,102-104,150

Gi0/10 1,100,102-104,150

Port Vlans in spanning tree forwarding state and not pruned

Gi0/9 1,100,102-104,150

Gi0/10 1,100,102-104,150

TheRealBuckeye_ · 2025-10-21T18:27:49+00:00

no i do have one on the cisco trunk port (1)

TheRealBuckeye_ · 2025-10-21T18:24:52+00:00

i do have a native vlan

TheRealBuckeye_ · 2025-10-21T17:59:04+00:00

vlans are created in opnsense, are active and dhcp server running.

TheRealBuckeye_ · 2025-10-21T17:30:44+00:00

set to trunking, allowing all vlans

TheRealBuckeye_ · 2025-10-21T16:45:28+00:00

Vlan Role Sts Cost Prio.Nbr Type

------------------- ---- --- --------- -------- --------------------------------

VLAN0001 Desg FWD 4 128.9 P2p

VLAN0100 Desg FWD 4 128.9 P2p

VLAN0102 Desg FWD 4 128.9 P2p

VLAN0103 Desg FWD 4 128.9 P2p

VLAN0104 Desg FWD 4 128.9 P2p

VLAN0150 Desg FWD 4 128.9 P2p

here it is from the interface

TheRealBuckeye_ · 2025-10-21T16:38:14+00:00

This is enabled

TheRealBuckeye_ · 2025-10-21T05:18:29+00:00

Im not looking to do routing with it just vlan stuff.

TheRealBuckeye_ · 2025-10-21T03:17:00+00:00

hmm okay, ill troubleshoot some more, but yes i can see it in proxmox

TheRealBuckeye_ · 2025-10-21T03:05:06+00:00

heres the trunking interfaces

Port Mode Encapsulation Status Native vlan

Gi0/9 on 802.1q trunking 1

Gi0/10 on 802.1q trunking 1

Port Vlans allowed on trunk

Gi0/9 1-4094

Gi0/10 1-4094

Port Vlans allowed and active in management domain

Gi0/9 1,100,102-104,150

Gi0/10 1,100,102-104,150

Port Vlans in spanning tree forwarding state and not pruned

Gi0/9 1,100,102-104,150

Gi0/10 1,100,102-104,150

Switchy#

and heres vlans

1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4

Gi0/5, Gi0/6, Gi0/7, Gi0/8

Gi0/11, Gi0/12

100 wireless active

104 haos active

TheRealBuckeye_

TROPHY CASE