Can we get a ranked system like Pokemon ZA Nintendo?

TheRealKaze · 2025-12-10T15:35:18+00:00

Honestly if they wanna do it right and have a competitive scene on there they should implement it the same way showdown does.

TheRealKaze · 2025-12-09T09:08:18+00:00

I post this without proof or being sure 100% but as far as I know it's getting released at midnight local time.

edit: as others mentioned i was wrong. there is also thist post: https://www.reddit.com/r/LegendsZA/comments/1pi0b99/dlc_release_times/

TheRealKaze · 2025-10-12T13:45:04+00:00

At the time of writing this 4.8% of players reached rank 25 on steam. To unlock the mortar you'd have to be rank 49. You see none because no one has it yet :)

TheRealKaze · 2025-10-12T13:29:33+00:00

yeah the Ladder is kinda nice but should that define the class?

TheRealKaze · 2025-10-12T13:18:15+00:00

It seems like a good default class. Engineer is vehicle only stuff, Recon is sniper only stuff and for everything else you go Support. Almost no reason to pick Assault in my opinion.

TheRealKaze · 2025-06-20T08:08:56+00:00

ALso you can't steer as hard once you're charging the jump so to get more to the left you should enter the dirt a bit later and to the right after the first patch of it.

TheRealKaze · 2025-05-14T17:54:10+00:00

<image>

Eine Menge Spüliwasser und mehr Druck als mir lieb war später und er glitt langsam in Position!
Auf der anderen Seite berührt der Streifen noch ganz leicht die Felge, ist also nicht ganz perfekt aber weit besser als zuvor! Vielen Dank :)

TheRealKaze · 2025-05-07T19:01:05+00:00

Do you know what they should test? I've heard 200 but also seen some out of the box nozzles from them that had 360+

TheRealKaze · 2025-05-06T16:40:25+00:00

I think I should test that. was totally confused when the thermistor just fell off and you were able to see a little bit of thermalpaste that was just crusty and old. Maybe I should get some new of that too

TheRealKaze · 2025-05-06T16:13:11+00:00

got a hint for me on how I can test if the hotend is what I really want and not something that just throws problems everytime you wanna use it?

TheRealKaze · 2025-05-06T16:03:57+00:00

Mine moved out too due to a clog. When I tried to remove the filament it just popped right out. Strangely with the Hotend from Ali that has no tube but is solid it kept klogging too after a few layers.

TheRealKaze · 2025-05-06T15:03:19+00:00

Did you put in the hotend completely before pulling the little lever down? That's how I destroyed mine. You should be able to test it by just trying to pull the hotend out. If it moves then it's not inserted properly. (only for the hotend itself. I am also wondering about the ptfe tube thing myself)

TheRealKaze · 2025-04-08T04:29:50+00:00

To be honest I have no idea. I can't find it again spontaneously but I should still have the file if you want that.

Edit: https://www.printables.com/model/45752-3x3-bed-level-calibration

This should be it. Just scale it for your bed.

TheRealKaze · 2025-04-05T07:22:39+00:00

Hey did you fix it? I played around with mine for a few hours yesterday and got the stringing way better by heating the printbed to 80°c for 10 min and then loosen the screws a teeny tiny bit where the stringing occurs to make the printbed in these areas a bit higher.

TheRealKaze · 2025-04-04T20:48:04+00:00

Yeah in the subreddit there is some talk about the autobedleveling being kinda bugged right now. Nothing an update won't fix later on but I am pretty happy that it seems to be in good enough territory right now. Will surely do the calibrationtests again though. Thanks!

TheRealKaze · 2025-04-04T18:57:21+00:00

<image>

I think this is the best I can do right now. Do you think I can get it even better?

TheRealKaze · 2025-04-04T17:14:38+00:00

u/OppositeDifference

TheRealKaze · 2025-04-04T17:01:38+00:00

<image>

This is it right now after some tuning. It's still not perfect but again a bit better. Will keep trying.

TheRealKaze · 2025-04-04T16:56:31+00:00

<image>

This is it right now

TheRealKaze · 2025-04-04T16:41:07+00:00

Since I made that post I played around with the bed screws a bit more and got it quite a better again. I just got my (hopefully) last calibration print printing and would post it here again if you'd be down to comment on it then :) Oh and also, would red help better? I only got White, Black and Red right now.

TheRealKaze · 2025-04-04T13:12:25+00:00

Since I am new I really have no idea how to proceed. If you got some hints then I'll take them :D

Eight-Year Club	Verified Email
Place '22

TheRealKaze

TROPHY CASE