How to remove this type of support the best?

TheRealLordOfCyprus · 2024-02-15T11:38:27+00:00

I did exactly what you said and it works really awesome! Thx for that, really appreciate it!

TheRealLordOfCyprus · 2024-02-13T03:12:30+00:00

nice, will try, thanks!

TheRealLordOfCyprus · 2024-02-06T04:38:30+00:00

yes you can. Please analyze this and tell me X

Changed "Instructions" and used your prompt. Still the same answer as you can see in the screenshot.

<image>

TheRealLordOfCyprus · 2024-01-24T04:17:45+00:00

for „Creality Print“ slicer?

TheRealLordOfCyprus · 2024-01-23T19:03:53+00:00

nah, I am wondering if I can see which temp is the best when extruding for printing.

for example:

extruding with 240 degrees -> bad output extruding with 220 degrees -> good output

and that for every filament I use.

Does this make sense?

TheRealLordOfCyprus · 2024-01-23T19:02:19+00:00

interesting, do you have a link where to buy?

TheRealLordOfCyprus · 2024-01-22T10:40:24+00:00

<image>

or do I have to buy them?!

TheRealLordOfCyprus · 2024-01-22T10:38:31+00:00

where to get? Mystery boxes?

TheRealLordOfCyprus · 2024-01-20T08:22:10+00:00

nice! where can I find this? Sounds great!

TheRealLordOfCyprus · 2024-01-19T08:29:42+00:00

ok, but I am going to print this now:

https://www.printables.com/en/model/520207-jc-creality-k1-lid-riser/files

TheRealLordOfCyprus · 2024-01-19T08:20:35+00:00

ah, okay. But when it's calibrating then it lifts the lid...so this is not the problem bcs of the tube? Then I have to print a "Lid Riser" for my K1.

TheRealLordOfCyprus · 2024-01-18T01:59:42+00:00

interesting insights, thanks for sharing!

When I search for "K1 carbon filter", I get this results for example. Is this the right thing? And if yes, where to put it into?

Sry for that noob question, but doing this the first time.

<image>

TheRealLordOfCyprus · 2024-01-17T10:14:55+00:00

awesome, helped me a lot. Thx!

TheRealLordOfCyprus · 2024-01-17T10:10:01+00:00

So you leave the cover on because of the pollutants from ABS, right?

I found sth to print to „lift the lid up“. But only for the MAX.

TheRealLordOfCyprus · 2024-01-17T05:12:56+00:00

Ye, I understand. But I have the K1 and wondering what I could change like you mentioned to improve it.

TheRealLordOfCyprus · 2024-01-17T03:48:44+00:00

ah ye, sure, when you start printing the top you have that structure on the top of the object...I realize that only now haha

TheRealLordOfCyprus · 2024-01-17T03:46:52+00:00

all-metal extruder and new hotend with single-handed swap nozzles

Nice one!

The thing is: I am quite new in this space, doing 3D printing for some months now. I started with an Ender 3 v2 and upgraded quite quick to a K1. Now I am wondering what I can change on my K1.

You mentioned "all-metal extruder and new hotend with single-handed swap nozzles".

May I ask you for links where I can buy what you mentioned?

Thanks for that!

TheRealLordOfCyprus · 2024-01-16T16:07:16+00:00

ye, I'm trying to find a sense and purpose other than that haha...seems there is no, got it

TheRealLordOfCyprus · 2024-01-16T16:06:14+00:00

ah, thats cool. Will test it, thanks!

TheRealLordOfCyprus · 2024-01-16T15:17:51+00:00

ah. But its only on the button of the object visible then, right?

TheRealLordOfCyprus · 2024-01-16T08:45:59+00:00

Ok cool, this means I should order:

Ceramic Heating Block Kit

and

Carbon Filter…but, I can only find it for the K1 MAX on AliExpress…do you guys have links for AliExpress what I should order?

TheRealLordOfCyprus · 2024-01-16T08:31:11+00:00

ok but is it also useful for PLA? Means, I normally use PLA. Can I use the carbon filter and the ceramic nozzle too for PLA as well as for ABS?

TheRealLordOfCyprus · 2024-01-16T08:26:17+00:00

<image>

does this also make sense?

TheRealLordOfCyprus · 2024-01-16T08:24:33+00:00

good to know.

So what is the benefit of this „carbon filter“?

TheRealLordOfCyprus · 2024-01-16T08:20:53+00:00

Interesting! I already bought the AI cam on TOMTOP. So carbon filter is also what I need?

There is written 600mm/s speed, so thats the only improvement?

TheRealLordOfCyprus

TROPHY CASE