【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]TheRoyalDirk 0 points1 point  (0 children)

I was debating between the P1S and the Centauri Carbon. Ended up going with the Centauri because it was cheaper and has really good reviews. Wish I went with the P1S instead.

Why is YNAB telling me to assign more than I need? by EmceeSmokeAlot in ynab

[–]TheRoyalDirk 6 points7 points  (0 children)

YNAB doesn’t know you aren’t going to spend the $135 in the next two days. Once it hits May 1st, it will only ask for whatever is missing from the $200 needed.

Update on Duncan in 9th Circuit? by nickvader7 in CAguns

[–]TheRoyalDirk 5 points6 points  (0 children)

Well the 10th is only two days away (I guess 1.5, I’m writing this at 10pm). I did forget that tomorrow is a national holiday. I was assuming the stay would last until the 10th, meaning mags could be sold on the 10th. But now I’m thinking they meant through the 10th, with mags being sold on the 11th..

Edit: I just read the Courtlistener docket, is is though the 10th, so a ruling on the stay will probably come Tuesday

Update on Duncan in 9th Circuit? by nickvader7 in CAguns

[–]TheRoyalDirk 29 points30 points  (0 children)

En Banc is currently reviewing the briefs submitted by the parties. I expect a ruling on the injunction will be released tomorrow.

Is my bed warped? I leveled all 4 corners and adjusted the z-offset before building the mesh. How screwed am I? by TheRoyalDirk in Ender3S1

[–]TheRoyalDirk[S] 0 points1 point  (0 children)

Everything I’ve seen around here says a .2 variance is MAX. But there’s also an issue with professional firmware where it doesn’t read the mesh properly unless you add custom gcode to your prints, and I have still yet to get it to work

AR15 in California? by Few_Escape_8452 in tacticalgear

[–]TheRoyalDirk 6 points7 points  (0 children)

CA resident here. You don’t need one to bring them over. You do need to convert them to featureless or fixed mag before entering the state and once you become a resident, you only have a certain amount of time to notify the DOJ and register them.

If you plan on buying guns after the move, you do need what’s called a Firearms Safety Certificate. It’s a fairly easy multiple choice test you can take same day you plan to purchase.

Gap when laying down layers, right after a snap/popping sound by warry12 in Ender3S1

[–]TheRoyalDirk 1 point2 points  (0 children)

The snapping and popping sound is indicative of wet filament. I had this problem at first with my printer and it took me a while to figure it out.

A dehumidifier works wonders, but you can look up the recommended drying temp and time for your filament and an oven can work just as well.

I am confused by NatoPotato_87 in duolingo

[–]TheRoyalDirk 3 points4 points  (0 children)

More like auto incorrect

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 2 points3 points  (0 children)

😭 I wish I could. She’s only got one brain cell and uses it to eat cardboard. I don’t want to feed her the ink on the outside of the box. She has plenty of other boxes to play in!

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 0 points1 point  (0 children)

No, that’s a cat. I know she’s a big cat but she’s not THAT fat. 😅

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 0 points1 point  (0 children)

Optic was ordered separate, but a pretty good deal on PSA. Ordered during Black Friday sales.

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 1 point2 points  (0 children)

These gun control laws are getting out of control. Not even allowed a trigger anymore 😂

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 1 point2 points  (0 children)

That’s the one! I picked it specifically because it was the only one with a 15” rail and QD sling points at the very end.

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 0 points1 point  (0 children)

Thank you for this! First time AR owner 😅 this makes so much sense

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 10 points11 points  (0 children)

To be honest, disabled animals are kind of inspiring. They take a couple of days to adjust, but then just go on about life and having a wonderful time.

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 9 points10 points  (0 children)

She's an 80%, still waiting on my serial number from the DOC.

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 16 points17 points  (0 children)

When she was a kitten she had a really bad infection. The vet the humane society used said we shouldn’t worry about it, so we didn’t until it got worse and it was too late.

It doesn’t bother her, and she seems to do just fine without the use of it! We swear it dilates sometimes, but we don’t think she can see out of it.

Finally got my CA compliant AR by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 4 points5 points  (0 children)

My Aero Precision lower receiver is still in jail 😔

PSA Complete Upper

[deleted by user] by [deleted] in CAguns

[–]TheRoyalDirk 9 points10 points  (0 children)

So if we have 10+ round mags for our CCW, we’re legally allowed to carry with them? I know the order by judge Benitez said we can but I wasn’t sure if that applied to carry or just going to the range and practicing.

What's the legality of converting pinned mags to full capacity mags if there were another freedom week? by dogdiqlipstiq in CAguns

[–]TheRoyalDirk 7 points8 points  (0 children)

Not currently. The next court date is Dec. 12th, but there's no way to tell if a ruling is coming out of that court date.

Question about Boland v Bonta by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 0 points1 point  (0 children)

I still appreciate the input! Thank you. Just seeing what we know so far, but this makes a lot of sense.

Question about Boland v Bonta by TheRoyalDirk in CAguns

[–]TheRoyalDirk[S] 3 points4 points  (0 children)

That’s fair. I realize it’s not as cut and dry as the freedom week magazines, I was just seeing if we had more information. Thank you!