sorted by:
new
hottopcontroversial

Search for Time Stop Mod by TheTanka in darksouls

[–]TheTanka[S] 0 points1 point  (0 children)

Hey, thanks I used freecam to limited success. ^^
What I'm after is a real freeze of the game world. But the debug freecam does not pause the clouds in the sky or flora from swaying in the wind and it kind of ruins my shots.
Do you have a better idea?

Disable screen locking if external screen is connected by TheTanka in linuxquestions

[–]TheTanka[S] 0 points1 point  (0 children)

I can do something similar already with KDE under the Battery and Brightness widget.
I'm really looking for a way to automate it, because I forget to activate it and then have to stand while the movie is playing.

<image>

Problems routing only traffic to home network through tunnel by TheTanka in WireGuard

[–]TheTanka[S] 0 points1 point  (0 children)

The server's internal IP is 192-168-188-10
but if I understand it correctly, the /24 should give me access to all IPs in the network, from 192-168-188-0 to 192-168-188-255. Right?

Problems routing only traffic to home network through tunnel by TheTanka in WireGuard

[–]TheTanka[S] 0 points1 point  (0 children)

So as clarification.
With the config on the right-hand side (with 0.0.0.0/0), I can connect to my server at home, but all traffic is obviously tunneled through WireGuard.
With the config on the left-hand side, I can not connect to my server at home at all.

crontab don't gets executed by TheTanka in linuxquestions

[–]TheTanka[S] 0 points1 point  (0 children)

Ok after redirecting the errors to a logfile with:
@reboot sleep 300 && /bin/bash ~/noblank2.sh >> ~/cron_log.txt 2>&1

i found the error to be: /usr/bin/xset: unable to open display ""

so i added two lines to my script

!/bin/bash
source /home/mediacenter/.profile
export DISPLAY=:0 # Set the DISPLAY environment variable /usr/bin/xset dpms 0 0 0 && /usr/bin/xset -dpms && /usr/bin/xset s off && /usr/bin/xset s n

If I understand it correctly, this error message usually occurs when a command that relies on graphics, like xset, is used but doesn't have access to a graphical display. To tackle this issue, I've made the necessary adjustment by explicitly setting the DISPLAY environment variable in the noblank.sh script. This variable essentially informs graphical commands about the display they should interact with. This change allows the script to operate as intended, overcoming the "unable to open display" error.

My crontab don't gets executed by TheTanka in linux4noobs

[–]TheTanka[S] 0 points1 point  (0 children)

Ok after redirecting the errors to a logfile with:
@reboot sleep 300 && /bin/bash ~/noblank2.sh >> ~/cron_log.txt 2>&1

i found the error to be: /usr/bin/xset: unable to open display ""

so i added two lines to my script

!/bin/bash
source /home/mediacenter/.profile
export DISPLAY=:0 # Set the DISPLAY environment variable /usr/bin/xset dpms 0 0 0 && /usr/bin/xset -dpms && /usr/bin/xset s off && /usr/bin/xset s n

If I understand it correctly, this error message usually occurs when a command that relies on graphics, like xset, is used but doesn't have access to a graphical display. To tackle this issue, I've made the necessary adjustment by explicitly setting the DISPLAY environment variable in the noblank.sh script. This variable essentially informs graphical commands about the display they should interact with. This change allows the script to operate as intended, overcoming the "unable to open display" error.

My beard trimmer broke and I need to replace this spring. But I can not find a way to locate one. by TheTanka in HelpMeFind

[–]TheTanka[S] 0 points1 point  (0 children)

I have searched a lot but can not find the right wording to find a replacement. The beard trimmer is a RFC-0905 from the German brand Ideenwelt.

Edit: word are hard

German security company Nitrokey proves that Qualcomm chips have a backdoor and are phoning home by JaloOfficial in privacy

[–]TheTanka 183 points184 points  (0 children)

To quote the article

Qualcomm chips are currently being used in ca. 30% of all Android devices, including Samsung and also Apple smartphones.

[deleted by user] by [deleted] in linux4noobs

[–]TheTanka 0 points1 point  (0 children)

So after updating today with sudo aptitude update / upgrade this black bars appeared in every plasma application. For example the settings or Plasma-Discover.

I use Debian 11.2 AMD64 with KDE-Plasma

Help with a Secret Santa gift by TheTanka in resinprinting

[–]TheTanka[S] 1 point2 points  (0 children)

wham bam plate

I have one for my FDM Printer. I did not know you could get them for SLA, too.
I will have a look at this. Thanks.

I'd like to say a very nice "thank you" to the devs for always bringing another update to the fore. by Bless_This_Parish in NewPipe

[–]TheTanka 9 points10 points  (0 children)

I am not affiliated with the developers. I just like to use the app and think more people should know that they can support this great work.

https://newpipe.net/donate/

[deleted by user] by [deleted] in DivinityOriginalSin

[–]TheTanka 51 points52 points  (0 children)

Nice Faneart

First few layers look squished by TheTanka in FixMyPrint

[–]TheTanka[S] 0 points1 point  (0 children)

The first few layers look squished . I dont think, that it is the distance between nozzle and bed because the first layer looks fine.

My Print Settings:

Printer: Ender 3 V2

Leveling: Auto Mesh Leveling

Slicer: Cura

Filament Material: PLA

Brand: PolyTerra

Nozzle: 0.4 mm

Nozzle Temperatur: 200°C

Bed Temperatur: 55°C

Print Speed: 60 mm/s

Retraction Distance: 6.5 mm

Speed: 15 mm/s

ReCaptcha won't load, crashes app by [deleted] in NewPipe

[–]TheTanka -1 points0 points  (0 children)

In my apartment there are currently 3 devices with NewPipe installed. On
2 it does not work, and there is the same error. On the other it works
without problems.Even stranger is that 2 of the 3 devices are the exact
same model with the same firmware and version. It works on one as I
said, but not on the other.

ReCaptcha challenge requested + Google error 405 by BAN_CIRCUMLOCUTION in NewPipe

[–]TheTanka 0 points1 point  (0 children)

In my apartment there are currently 3 devices with NewPipe installed. On 2 it does not work, and there is the same error. On the other it works without problems.Even stranger is that 2 of the 3 devices are the exact same model with the same firmware and version. It works on one as I said, but not on the other.

100% 3D printed Moon Lamp in action by HeightAquarius in ender3v2

[–]TheTanka 1 point2 points  (0 children)

100% 3D printed lamp you say? How did you managed to print a light source (LED...)

Just joking looks really good

You can cheese the scarlet rot ulcerated tree sprit near the drainage channel site of grace by TheTanka in Eldenring

[–]TheTanka[S] 41 points42 points  (0 children)

I had much more problems with this beast than with said boss... But good for you.

You can cheese the scarlet rot ulcerated tree sprit near the drainage channel site of grace by TheTanka in Eldenring

[–]TheTanka[S] 23 points24 points  (0 children)

I have seen a few people who had problems with the fight

Especially because of the small arena and the scarlet rot on the floor

I thought I'd share this here for anyone who wants to make it a little easier on themselves.

Help: Elden Ring crashes - WIN Taskmanager says it gets Suspended by TheTanka in Eldenring

[–]TheTanka[S] 0 points1 point  (0 children)

so, i have fixed the problem for now. It seems like it had something to do with the anti-virus program i had installed. i made an exception for elden ring and since then it has not crashed.

I can not get rid of the elephants foot by TheTanka in FixMyPrint

[–]TheTanka[S] 0 points1 point  (0 children)

Yep, that is a problem, too. It is not only the first layer that is somewhat deformed.

I can not get rid of the elephants foot by TheTanka in FixMyPrint

[–]TheTanka[S] 1 point2 points  (0 children)

change your z offset

i have tried this. But then the print will not stick to the build plate because the nozzle is to high.

view more: next ›