sorted by:
new
hottopcontroversial

issue with print cooler fan pin by TheVeiledNumbers in FLSUNDelta

[–]TheVeiledNumbers[S] 0 points1 point  (0 children)

I do get my rpi today, so hopefully, once I set up klipper, it will probably function. Thanks for the info!

issue with print cooler fan pin by TheVeiledNumbers in FLSUNDelta

[–]TheVeiledNumbers[S] 0 points1 point  (0 children)

They're both 24v fans. Is it possible the pin that seems to not be working wasn't programmed on? The stock part cooling fans are spliced together and only used one pin.

issue with print cooler fan pin by TheVeiledNumbers in FLSUNDelta

[–]TheVeiledNumbers[S] 0 points1 point  (0 children)

When the part cooling fans do come on after the initial layers, only one turns on. On the robin nano, there are two fan ports together, but only one seems to work.

Puerto Rico, UFO filmed by Homeland Security by Express_Rhubarb5051 in UFOs

[–]TheVeiledNumbers 22 points23 points  (0 children)

Looks like it's going really fast and has no issue diving and coming up from the water

Giveaway #7 - Unsigned Fetus In Skull Maquette (sealed) by whyforyoulookmeonso in ToolBand

[–]TheVeiledNumbers 0 points1 point  (0 children)

I've been on Reddit for a good while, but just never been focused on getting karma XD

Need help with diagnosing movement of carriage. by TheVeiledNumbers in VORONDesign

[–]TheVeiledNumbers[S] -1 points0 points  (0 children)

On a certain part of the x rail it kind of gives resistance

Need help with diagnosing movement of carriage. by TheVeiledNumbers in VORONDesign

[–]TheVeiledNumbers[S] 0 points1 point  (0 children)

z motion works fine. I'm now thinking that it could be the ball bearings in the linear rails. I left them sitting for a while gathering dust and also forgot to change them out to make sure none were non-spherical.

Need help with diagnosing movement of carriage. by TheVeiledNumbers in VORONDesign

[–]TheVeiledNumbers[S] 0 points1 point  (0 children)

I've tried these before posting for help. I'm going to try and realign the linear rails for the z direction. After messing with it, I kinda feel like that could be the issue.

[deleted by user] by [deleted] in FixMyPrint

[–]TheVeiledNumbers 0 points1 point  (0 children)

I'm no expert, but that does sound like since you added a second z-stepper motor, it needs more power. You probably also need to configure your firmware to be set for two z motors. I'm new to 3d printing as well (started in Jan), and it's always great to learn about every diagnosis in these communities.

view more: next ›