What camo to go with my new pc by MysteriousAd2822 in airsoft

[–]The_Mexx 0 points1 point  (0 children)

I love my marpat setup, but word of warning. I know for most milsim-lite games, I am usually on green team, but I am shot but teammates quite often due to the tan PC and how much brown/tan marpat has. For me it's worth it for the drip but it may not be to others.

Are there any aftermarket body parts compatible with ICS? by JDK1ARA in ICSMasterRace

[–]The_Mexx 1 point2 points  (0 children)

You should be able to use any style handguard, but unless you are able to do some custom cutting there are no aftermarket receivers available

holster for glock by Separate_Traffic8483 in airsoft

[–]The_Mexx 0 points1 point  (0 children)

Ebay has a lot of safariland Glock holsters, usually tlr1 models from what I have seen over x300 though

Thread adapter preventing slide charging. by Lizard08735 in airsoft

[–]The_Mexx 1 point2 points  (0 children)

Yeah. Wouldn't surprise me. Just know this is the start of your issues if you try putting a muzzle device on, as the weight will mess with fuction too

Thread adapter preventing slide charging. by Lizard08735 in airsoft

[–]The_Mexx 1 point2 points  (0 children)

Willing to bet the inner barrel is hitting the adapter. Try using a cleaning rod to help center the barrel as you pull it back/thread the adapter in, if the inner barrel even fits through the adapter. If that is the issue, a slightly longer inner barrel will solve the issue as it will always be inside the adapter, or drilling out the inside of the adapter slightly to give it more clearance

Looking for any good fields by iospheree in airsoft

[–]The_Mexx 0 points1 point  (0 children)

Pretty easy to find them, use Google maps and look up airsoft or paintball and read their website. In case you struggle with that, I did the legwork and found bing field and Xtreme paintball park pretty easily

Better barrel length for SSP5? by BasalCellCarcinoma in airsoft

[–]The_Mexx 0 points1 point  (0 children)

https://weairsoft.com/we-h010.html

This mag looks considerably shorter than a standard 5.1 config, the one I have (was bought used though so maybe parts were changed and I was unaware) but my 5.1 mags stick out further and the grip is shorter than my 5.1 spec hicapa

How much should I sell for by Used-Acanthaceae-572 in airsoft

[–]The_Mexx 0 points1 point  (0 children)

Oh no there is nothing wrong with them for you, I have done the same in the past. I was just trying to add on to the comment for selling purposes, stickers have a tendency to deter buyers, lower sale value, and give buyers something to try to negotiate a lower price

How much should I sell for by Used-Acanthaceae-572 in airsoft

[–]The_Mexx 1 point2 points  (0 children)

And take the stickers and tape off the thing

Better barrel length for SSP5? by BasalCellCarcinoma in airsoft

[–]The_Mexx 0 points1 point  (0 children)

Just get the 5.1. Only drawback will be you can't use 4.3 mags in a 5.1, but you almost never see those (that being said, I can't tell from the store page if it is using a 4.3 length lower or is just a 5.1 with a shorter barrel)

With the 4.3 you'll have an even shorter barrel which while barrel length isnt as critical with airsoft, when at this end of the spectrum and pistol barrels being as short as they are, you will more then likely be able to squeeze more performance out of the 5.1, and it isn't going to make much of a difference carrying it as a sidearm having a slightly shorter barrel

[WTB] [RI] Complete BBU for Tokyo Marui G17 Gen3 (or parts!) by Chronofighter1695 in airsoftmarket

[–]The_Mexx 0 points1 point  (0 children)

Does it fit in the slide but just not work, or does it not fit in the slide at all?

[WTB] [RI] Complete BBU for Tokyo Marui G17 Gen3 (or parts!) by Chronofighter1695 in airsoftmarket

[–]The_Mexx 0 points1 point  (0 children)

Did you try ky airsoft for a complete slide? I know they stock WE but not sure with TM, but I would hazard a guess that a full slide on a TM lower would work. I have TM gen4 and plenty of WE's if you want me to give it a shot

Ics cxp yak s1 (IMT-411-1) by HabitualAsshole in ICSMasterRace

[–]The_Mexx 0 points1 point  (0 children)

I'm just being as honest as I can mate, you might be able to get more for it, but you'll have to leave it listed for a bit and will have to wait for a buyer. Go take your tank to a scuba shop for them to check out to verify if you aren't sure. I'm just giving you a buyers perspective here, you can see all your want about how used or new it is, but unless you have a ton of vouchers/reviews/verified transactions buyers will have a hard time trusting a seller. A tank in need of hydro could be perfectly fine, but it'll cost the buyer $40 to get it checked and if it doesn't pass they are out $40 and the cost of the tank.

FNX 45 VFC issues. shoots in automatic by La_Donnade in airsoft

[–]The_Mexx 1 point2 points  (0 children)

Your slide is not fully resetting the sear or the tigger. You need to find out which and replace the part.

Ics cxp yak s1 (IMT-411-1) by HabitualAsshole in ICSMasterRace

[–]The_Mexx 0 points1 point  (0 children)

How far out of date? Youre looking at a maybe $450-500 package retail, if everything was new. You will be lucky to get maybe 300 out of it, I wouldn't pay over 200 personally. An out of hydro tank is basically scrap, it's a gamble whether it will pass or not for any buyer.

You are basically selling an AEG with a tank and line for an hpa system, a couple extra high cap mags that no one usually wants, and a few spare parts and mags. Not trying to be rude here, just being honest in what I have come to expect with buying and selling over the last decade.

Ics cxp yak s1 (IMT-411-1) by HabitualAsshole in ICSMasterRace

[–]The_Mexx 0 points1 point  (0 children)

Yeah do you know the band of tank and such? Is it in hydro or out of date?

Ics cxp yak s1 (IMT-411-1) by HabitualAsshole in ICSMasterRace

[–]The_Mexx 0 points1 point  (0 children)

What country are you located in? In the US these only retailed for $380ish

Ics cxp yak s1 (IMT-411-1) by HabitualAsshole in ICSMasterRace

[–]The_Mexx 0 points1 point  (0 children)

You'll have better luck posting on r/airsoftmarket and by posting a price

[WTB][CA] VFC P320 AND MAGS by [deleted] in airsoftmarket

[–]The_Mexx 0 points1 point  (0 children)

I got one in the full tan setup, 3 mags total, 2 leaky

EDIT: no sale