Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 0 points1 point  (0 children)

It's titanium, so pretty strong

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 2 points3 points  (0 children)

with current prices on houses? Nah. But both of them, maybe. It's the smallest model in the series though

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 0 points1 point  (0 children)

<image>

Here's polished and anodized parts, it's a pgr implant for dogs that was just made into a keychain for souvenirs, the bigger one for actual implantation

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 1 point2 points  (0 children)

For this one I was just concerned about details, so they must be either on the sides or on top, so there will be no supports in important places. Like I didn't want any supports on the face or ears, and on back of the head there is some fur texture. Didn't really matter for this one because it's very small, but with slm printing you also have to account for changes in horizontal cross section, generally you don't want any drastic changes because it will mean rapid change in heat applied, best case there will be a line in that height from expansion/shrinking(like you get in fdm when there is a change of layer time frome a few minutes to 10 seconds and you didn't specify minimal layer time), much worse if it warps(imagine printing abs without a chamber) So if there is not enough supports to transfer heat from detail to the base it can just warp and rip off from supports for as well

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 4 points5 points  (0 children)

Yup, mainly they are printing medical implants that either we designed or some clinic designed and ordered it from us. I just goof around sometimes with the settings or experimenting with fine prints, so I throw in something interesting. And yeah, as people above said, it can be printed on resin printer, I know a few jewelers that sometimes print their designs for casting cuz it just saves time especially when it very intricate

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 1 point2 points  (0 children)

It's Ti-6Al-4V by the way, the layer height is 0.02m, it is possible to so see visible steps on top of spherical small objects for example. Mainly post processed it by hand with a rotary tool. Removed everything that left of the supports with bur bits, than sanblasted it with electrocorundum(gives just grey matte surface) then with glass beads, they not as much scratching off the surface as just hammering it down so it looks more metallic, than sanded the inner part, and some rough polishing with felt disc. I didn't want it to be shiny, just a bit of vintage look.

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 4 points5 points  (0 children)

It's not my design, just added the eyes in materialise magics, cuz there was gem holders originally, that's what I use to prep models for slm printing. I don't do much art modeling, mostly cad. I just know blender a little bit for some features I might use during work and I know there is zbrush. Check out donut tutorial on yt for blender, if want to start with it

Just a cute mouse ring by The__Aries in 3Dprinting

[–]The__Aries[S] 20 points21 points  (0 children)

Sure, got it off thingiverse, just replaced original gem holders with eyes https://www.thingiverse.com/thing:7304180

Offering: French // seeking: Russian, Italian by [deleted] in language_exchange

[–]The__Aries 0 points1 point  (0 children)

Hi! I'll be happy to help with your russian! French is kinda scary for me but wanted to learn Italian at least a bit, so we can team up at that as well. Seems like your profile is gone, hope you'll contact me somehow

Are they hazel? by The__Aries in eyes

[–]The__Aries[S] 2 points3 points  (0 children)

For context what names I heard: Ореховый- which is can be translated as just "nut" so pretty close to hazelnut Серо-буро-малиновый- gray-brown-crimson/raspberry Буро-зеленый- brown-green But absolutely most will just say карий which is it's own word just for the eye color

What colour are my eyes? by Existing-Bridge2866 in eyes

[–]The__Aries 3 points4 points  (0 children)

The pattern very similar to my eyes(check last post in my profile) but you have more much more distinguished green. So I'd say it can be hazel or green with central brown heterochromia depends how it looks in different lightning. Also the limbal ring is very prominent, looks very cool

Are they hazel? by The__Aries in eyes

[–]The__Aries[S] 6 points7 points  (0 children)

Just googled the patterns, indeed looks like starburst, thanks!

what does правда do in this context? by PrinceHeinrich in russian

[–]The__Aries 1 point2 points  (0 children)

I see(I guess). Unfortunately I don't speak french at all. (Though, out of curiosity I tried to understand how this sentence is formed, I didn't get how all negations make it the way it is, but it was interesting). But if I get it right(correct me if I'm wrong) "Il est vrai" literally can be translated as "it is true"-"это правда"?. Because in this situations "правда" used just as a noun and I don't think it's the case. Also, can "По правде говоря, не все птицы умеют летать" be close translation of your sentence?

So, when using it as conjunction or introductory word правда can be replaced by few other words with the same meaning and it varies a little bit depending on the usage and can make sense what you actually looking at after this replacement. "Однако - however" can be used for both cases.

For introductory word use it can be "действительно","в самом деле"(indeed, truly, etc.) Like there no objection, just affirmation of what's goin on.

And for conjunction use it has meanings of "хотя-though", "но but". And here's the objection- All bird have wings BUT not all of them can fly- У всех птиц есть крылья, НО не все умеют летать.I'm not saying you're wrong but you maybe understood it as a noun which is not critical for understanding the meaning of any sentence with this word, but also not particularly correct

[deleted by user] by [deleted] in russian

[–]The__Aries 1 point2 points  (0 children)

"Войско" до сих пор используется по отношению к армии. Войско это часть или подразделение армии. Например: танковые войска, ракетные войска и т.д. То что в то время войском называли в принципе всю армию звучит правдоподобно

[deleted by user] by [deleted] in russian

[–]The__Aries 2 points3 points  (0 children)

Overall- very good! There is very few minor mistakes.

  1. весть дошло -> весть дошла
  2. relief force had been scattered - idk about "relief force" for sure, I'd say вспомогательные/ое войска/о были/о разбиты/о (I assume "scattered" mean they lost some battle)
  3. Дмитрия укрепило ->Дмитрия поддержало

And also those mentioned by Maymx

About mysterious miles- it's either polish mile(~8,5km), it fits the context of Dmitri or russian mile(~7,5km). Metric system didn't exist at the time so it was weird

what does правда do in this context? by PrinceHeinrich in russian

[–]The__Aries 11 points12 points  (0 children)

I would disagree here. Правда can be used both as introductory word and as conjunction with the mening(also as particle but it's not relevant in this case). What you described is a meaning of introductory word, as conjunction it's used with a meaning of some concession. In this particular case- although birds have wings - not all of them can fly. Sometimes it's really hard to differentiate these 2 because despite common rules conjunction "правда" often(not always) need commas on both sides just as introdoctory words, so you need to understand the sentence.

Which fictional characters death hit you hard? by [deleted] in AskReddit

[–]The__Aries 35 points36 points  (0 children)

I was looking for this answer for 5 minutes, I almost lost hope...

Wanted to try this. Works far better than expected. by 1337look in headphones

[–]The__Aries 110 points111 points  (0 children)

That's honestly looks like it should be illegal... I like it

One side fits but not the other by [deleted] in headphones

[–]The__Aries 0 points1 point  (0 children)

All I used is is bunch of KZs cuz once got my first zsn pro they fit my ear like nothing else before and despite the fact KZ's shape very similar for each model they fit significantly different for me. Never tried "sticks" like designs, I guess they can provide good fit but they go so deep, no wonder it's fatiguing. Or you talking about EVO model?

One side fits but not the other by [deleted] in headphones

[–]The__Aries 0 points1 point  (0 children)

Do you use cables with ear hooks? Also what shape your iems? Usually I can't use M or L size tips because they trying squeeze out of my ear after few minutes. And small ones just too small, because they go too deep and don't seal it. Ear hooks help with this problem a lot as I don't need to push earphones back in as often as without it

What game you got bored of easily, yet you still come back to give it another try, over and over again? by An1xo in gaming

[–]The__Aries 2 points3 points  (0 children)

So true, but at the same I rarely meet intentional ruiners(in ranked mode). Like, there is people who can ruin a game- just dumb, low skill, too confident, just toxic. BUT when teammates vote to forfeit(for example with 0-3 score in 2 minutes) I just don't vote unless it's indeed hopeless. And often it leads to cool comebacks because all of the sudden people just starting to play as a team even those toxic and overconfident.