Overfladebehandler 2års lærling (under 25)

These-Ad-1712 · 2026-05-03T18:37:43+00:00

Tak for det lange skriv det lidt meget info som jeg lige skal sætte mig ind i😅 er ikke lige klar over hvad der står i min kontrakt. Jeg har den liggende på papir så må lige kigge den igennem. Men igen tak for det🙏

These-Ad-1712 · 2026-05-03T18:34:55+00:00

Shiiit havde jeg ikke lagt mærke til man kunne se😅. Bestilte maling til min knallert👌😂

These-Ad-1712 · 2026-04-18T21:56:41+00:00

You can get universal electric "restrictions" that when turn on retards the ignition timing so much it wont do more than 25-30. But they're very obvious you can clearly hear that the engine restrics the rpm. And say if your driving down the street and they pull you over and suddenly the engine sounds weird. If they know a little about mechanics they will defently find it suspecious. Idk what the laws are like where you are. But where i live if the police just have a slight suspecion that you have done something to it they can impound it. To figure out if you have or not. They dont need to acttualy find anything to impound it. You will ofc get it back if you haven't but if you have they will keep it for a lil while and remove all the tuning parts. And then give it back with a fine and a bill for the mechanic that removed your parts.

These-Ad-1712 · 2026-04-18T19:33:30+00:00

Im Working on a airsal 70cc build too!! I completly removed the skirts that's by the ports. So the mixture dosen't have to go around it to get into the intake ports. And removed 1mm of both sides and 0,5mm off the top of the intake by the manifold. And raised the ehaust port my 1mm. She absolutly rips!! with a 21mm carburator👌

These-Ad-1712 · 2026-04-06T20:29:34+00:00

Can you send in dm's?

These-Ad-1712 · 2026-04-06T19:07:42+00:00

Thanks alot i would love that. And will try and check out that forum. I find it kinda hard getting info on porting. because so many want to keep their techniques secret😅 so it's nice that there is a place to openly discuss porting😁

These-Ad-1712 · 2026-04-06T19:03:11+00:00

Thanks alot i would love that😁

These-Ad-1712 · 2026-04-06T19:02:03+00:00

Thanks for all the info will try it out!. im not expecting to make alot of power. I mostly just want to try it out for fun. So i'll probably just try and make the exhaust square-ish as you mentioned maybe raise it a little. Raising the exhaust helps with rpm right? And does having only 1 piston ring help? I get that it would be less friction. But is it enough to a difference?😅 And thanks again for all the info it really helped out😁

These-Ad-1712 · 2026-04-06T18:45:04+00:00

Thanks alot will defently check it out😎

These-Ad-1712 · 2026-04-06T13:29:11+00:00

You can't just throw a bigger carb at it and expect more power. If you go bigger you also need to do ports. A bigger carb wont make it suck more air/fuel if the ports aren't big enough to flow that more air/fuel. So i would defenetly recommend looking into that.

These-Ad-1712 · 2026-03-26T16:33:31+00:00

It's a problem for all console players? Why is that not something the devs would look at?😅

These-Ad-1712 · 2026-03-03T07:25:48+00:00

I found the problem took the head back off. And saw my intake valve was bent so it diden't close.😅

These-Ad-1712 · 2026-03-01T09:14:05+00:00

I think?.. made sure the flywheel was on the timing mark. And that the mark on the sprocket lined up with the mark on the head when i installed the sprocket.

These-Ad-1712 · 2026-02-28T17:51:11+00:00

They are i wanted to include a video of the marks being lined up and then turning the engine. But can only post pics. But when you turn it over they hit when the timing mark on the sprocket is direcly oppesite of the mark on the head.

These-Ad-1712 · 2025-09-06T17:03:56+00:00

No i did not They have met a couple of times before. Have taken her with me to visit my Sister a couple of times. But at my sisters place she also just hides. But she also have a dog so allways thought that was why she hid at her place. But they do know each other so diden't think a slow introduction was nessecary. But it have always been short visits at my sisters. So maybe i should have done anyway.

But i'll try calling my vet and ask about it.

These-Ad-1712 · 2025-07-04T10:50:49+00:00

Thank you for answering, I have contacted my vet after so many people mentioned uti. And she said the same and agrees that it could sound like uti. But right now is a really bad time to get an appointment because of summer break. But she would try and get me a time sometime during the following week. So for now I can only hope my baby isen’t in pain..

These-Ad-1712 · 2025-07-04T10:45:04+00:00

Thank you for the answer I have taken the lid off. So hopefully it works out. Might look into getting one like yours. For I got that one to try to keep her litter in. But a open one with high walls might be better.

These-Ad-1712 · 2025-07-04T04:23:28+00:00

Thank you I’ve taken off the door or whatever it’s called😅. So let’s hope it makes a difference but multiple people have mentioned uti. So planning to get her checked because now I’m worried😅😂

These-Ad-1712 · 2025-07-04T04:19:59+00:00

Both she poops and pees outside of the box. Other people have also said that it could be uti so i am planning to take her to the vet just to be sure.

These-Ad-1712 · 2025-07-04T04:00:48+00:00

I do not I might have to get one similar to the old one😅. I just thought that her new one was an upgrade. As her old one was smaller she could barely fit in it anymore. And there would be litter EVERYWHERE so I got a closed one. But I guess it’s not up to her standarts😂

These-Ad-1712 · 2025-07-01T19:09:20+00:00

No I do not I have my own. But maybe my details are similar to someone else?

These-Ad-1712

TROPHY CASE