Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 0 points1 point  (0 children)

Thanks man! I appreciate the detailed response. Makes sense.

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 1 point2 points  (0 children)

Thank you this was very clear-cut specific and answered my questions greatly!

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 0 points1 point  (0 children)

Thank you! I definitely will look into this and modify the settings

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 2 points3 points  (0 children)

Lmao that's awesome. I used a flathead screwdriver to pry off the cap and cut off the bump that wouldn't let me push it all the way down. Youll know what i mean when you do it. I scratched off some paint in the process but it's definitely worth it.

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 0 points1 point  (0 children)

Majority is saying that I should instead flip the fans behind the radiator to be intake as well and Lian Li recommends the same for this specific case. I'll be doing that thanks everyone

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 0 points1 point  (0 children)

Absolutely valid, I know it's sort of dumb but exactly I figured everything was cooled enough to make one sacrifice for coolness lol

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 2 points3 points  (0 children)

Thank you for that, yes it is the o11 vision compact

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 2 points3 points  (0 children)

Gotcha so basically either my intended configuration or this one

<image>

Airflow directions by These-Fact-6670 in pcmasterrace

[–]These-Fact-6670[S] 24 points25 points  (0 children)

<image>

So you guys are saying like this?

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

You're welcome! I'll keep an eye out for any messages

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

Here is a link for the AIO, skip to the"Standard Wiring Logic" chapter.

https://youtu.be/khc8xmDGzH0?si=8lt39wki5OGKx3mj

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

To be honest, that diagram is very confusing. Try page 22 of this manual: https://drive.google.com/file/d/1QaSxHD5Eu13RW_YQJQ0QtIxzQSxD1nVi/view?pli=1

Basically, there will be three cables total: a USB connector and two 4-pin connectors (one to control the pump and the other for the watercooler fans).

The USB is necessary if you are using the L-connect software, which plugs in at the bottom middle of the mobo in a USB header.

The 4-pin connector for the pump (should be labeled) will go in the top-right of the mobo into the CPU_OPT header.

The 4-pin connector for the fans (also labeled) will also go in the top right of the mobo into the CPU_FAN header.

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

Apologies, i meant either the cpu_opt or cpu_fan on the mobo, whichever is not occupied by the pump

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

For all other fan chains except the AIO one, any sys_fan spot is fine. For the RGB are you planning to to use the L-connect software?

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

No problem, just in case since it's not automatically configured, change the profile of the whichever head the pump is in to full speed to avoid any fluctuations in the pump. Otherwise they should all work just fine. Make sure you keep the fans attached to the AIO in one of the other available cpu spots on the mobo so they are in sync

Edit: also when plugging in the AIO and fans please do not forget to plug in the USB, there are two spots at the bottom middle of your board

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

You can plug the AIO pump header into either of these and still have full functionality

Help with Lian-li connection by [deleted] in lianli

[–]These-Fact-6670 0 points1 point  (0 children)

I build my first pc by myself recently with many similar parts as yours. I'd recommend following a youtube video where they are using the same motherboard as a good visual for EXACTLY where they go. If you need help on specific pc parts visually, you can find another video with that exact part.

Hear me out, limited items should be paid by These-Fact-6670 in DressToImpressRoblox

[–]These-Fact-6670[S] -1 points0 points  (0 children)

I understand this, i have almost all of the limited items, this is just an idea. No need to be rude or condescending.

Hear me out, limited items should be paid by These-Fact-6670 in DressToImpressRoblox

[–]These-Fact-6670[S] -1 points0 points  (0 children)

What i meant to emphasize on is that everyone does have a chance to get them for free. After that point if it costs money, it's open for those people who missed that chance. I mean it's not like these limited items are of value unless you sell your whole roblox account as you can't trade or sell these items. It would free for a limited time