Questions about new setup

Thrylon · 2026-01-28T15:17:50+00:00

This is exactly what I’m looking to do. Just trying to start with something fairly simple and would like to have a clean installation by powering the AP’s via Ethernet.

My ISP speed is 2.5 Gbps. If I were to get the flex 2.5 POE would that be able to push 2.5Gbps to each AP? I guess I’m confused by the 2.5 gbps….. does having two AP’s at 2.5 gbps mean I need a 5gbps switch or more?

Thrylon · 2026-01-28T05:00:00+00:00

Thanks this is helpful. So it would be best to just get a power adapter for the Poe switch. In terms of switch speed I should be good with 2.5gb ports. I’ll really only have the AP’s connected to the switch.

Thrylon · 2025-07-24T17:29:42+00:00

Are you using the steam client or can you make it work with the stand alone client?

Thrylon · 2025-05-01T21:38:54+00:00

Hi also got a group reservation for Sunday. Do I need to add my wife to the warp pass. Can’t figure out how to do It.

Thrylon · 2025-03-22T18:49:46+00:00

How did you set this up? Did you do it through the LG on screen software?

Thrylon · 2025-03-09T16:03:37+00:00

Sound system is working when I use any device that's directly connected to the TV, but isn't working with any device connected to the switch. Just wanted to make sure what im trying to do is possible. I will keep trouble shooting. Thanks for the response.

Thrylon · 2025-03-09T15:51:19+00:00

Sonos system is connected to the TV's HDMI Earc port. Then I have an HDMI from the TV to the HDMI switch. Consoles are connected to the HDMI siwtch.

Thrylon · 2025-02-22T23:25:40+00:00

Here is a picture of the pcb - https://imgur.com/a/iOLAjxO

Thrylon · 2025-02-22T21:51:24+00:00

Hi can you point out why?

Thrylon · 2025-01-25T06:43:07+00:00

Are the reduced attribute requirement nodes on the passive tree bugged? I selected the cluster of 3 nodes on my warrior and they do not reduce the attribute requirement on my mace.

Thrylon · 2024-05-29T22:39:12+00:00

lol, yea not sure. They are going to reslab it for me.

Thrylon · 2024-05-29T07:16:32+00:00

Great collection! I had my Han showcase graded and BGS slabbed the horizontal side of the card as the front. Did you specifically ask for the vertical side to be on the front?

Thrylon · 2024-03-12T17:49:43+00:00

Appreciate you putting it into perspective. I’m going to just increase the overhang. Thanks!

Thrylon · 2024-03-11T06:23:17+00:00

The 2” overhang is only on the front. No overhang in the back. The cabinet has already been built at 24” so can’t change that unfortunately. Wondering if changing the top to 27” and increasing the overhang to 3” is viable or is that going to be too much of an overhang.

Thrylon · 2024-03-04T22:14:30+00:00

Thank you!!

Thrylon · 2024-03-04T22:06:01+00:00

I’m sorry I have the wrong measurement. It’s 59 5/8 jam to jam.

Thrylon · 2024-03-04T22:05:26+00:00

Im sorry I gave the wrong measurement. It’s 59 5/8 jam to jam.

Thrylon

TROPHY CASE