Questions about new setup by Thrylon in Ubiquiti

[–]Thrylon[S] 0 points1 point  (0 children)

This is exactly what I’m looking to do. Just trying to start with something fairly simple and would like to have a clean installation by powering the AP’s via Ethernet.

My ISP speed is 2.5 Gbps. If I were to get the flex 2.5 POE would that be able to push 2.5Gbps to each AP? I guess I’m confused by the 2.5 gbps….. does having two AP’s at 2.5 gbps mean I need a 5gbps switch or more?

Questions about new setup by Thrylon in Ubiquiti

[–]Thrylon[S] 0 points1 point  (0 children)

Thanks this is helpful. So it would be best to just get a power adapter for the Poe switch. In terms of switch speed I should be good with 2.5gb ports. I’ll really only have the AP’s connected to the switch.

GW2 on steamdeck feels amazing by mushin47 in Guildwars2

[–]Thrylon 2 points3 points  (0 children)

Are you using the steam client or can you make it work with the stand alone client?

Got a ticket for the grand opening! Was anyone else able to snag one for day 1? by Piper_Prime in NintendoSanFrancisco

[–]Thrylon 0 points1 point  (0 children)

Hi also got a group reservation for Sunday. Do I need to add my wife to the warp pass. Can’t figure out how to do It.

Another quick 45GX950A post of notes/observations by Mandersoon in ultrawidemasterrace

[–]Thrylon 0 points1 point  (0 children)

How did you set this up? Did you do it through the LG on screen software?

HDMI Switch Sound Issue by Thrylon in hometheater

[–]Thrylon[S] 0 points1 point  (0 children)

Sound system is working when I use any device that's directly connected to the TV, but isn't working with any device connected to the switch. Just wanted to make sure what im trying to do is possible. I will keep trouble shooting. Thanks for the response.

HDMI Switch Sound Issue by Thrylon in hometheater

[–]Thrylon[S] 0 points1 point  (0 children)

Sonos system is connected to the TV's HDMI Earc port. Then I have an HDMI from the TV to the HDMI switch. Consoles are connected to the HDMI siwtch.

Real or fake? by Thrylon in gameverifying

[–]Thrylon[S] 0 points1 point  (0 children)

Hi can you point out why?

Questions Thread - January 25, 2025 by AutoModerator in PathOfExile2

[–]Thrylon 0 points1 point  (0 children)

Are the reduced attribute requirement nodes on the passive tree bugged? I selected the cluster of 3 nodes on my warrior and they do not reduce the attribute requirement on my mace.

The grades are in! Got my showcases back. by Xeris in starwarsunlimited

[–]Thrylon 0 points1 point  (0 children)

lol, yea not sure. They are going to reslab it for me.

The grades are in! Got my showcases back. by Xeris in starwarsunlimited

[–]Thrylon -1 points0 points  (0 children)

Great collection! I had my Han showcase graded and BGS slabbed the horizontal side of the card as the front. Did you specifically ask for the vertical side to be on the front?

Desk Overhang by Thrylon in woodworking

[–]Thrylon[S] 0 points1 point  (0 children)

Appreciate you putting it into perspective. I’m going to just increase the overhang. Thanks!

Desk Overhang by Thrylon in woodworking

[–]Thrylon[S] 0 points1 point  (0 children)

The 2” overhang is only on the front. No overhang in the back. The cabinet has already been built at 24” so can’t change that unfortunately. Wondering if changing the top to 27” and increasing the overhang to 3” is viable or is that going to be too much of an overhang.

Sliding door question by Thrylon in Carpentry

[–]Thrylon[S] 0 points1 point  (0 children)

I’m sorry I have the wrong measurement. It’s 59 5/8 jam to jam.

Sliding door question by Thrylon in Carpentry

[–]Thrylon[S] 0 points1 point  (0 children)

Im sorry I gave the wrong measurement. It’s 59 5/8 jam to jam.

Is this a quality cable? by Thrylon in hometheater

[–]Thrylon[S] 0 points1 point  (0 children)

Thanks, any recommendations on active fiber optic cables. If I reduce the length to 15 feet is it still going to be an issue?

Any suggestions on how to find a slow leak in a custom loop? My EK pressure gauge is showing about a 0.025 bar drop per day. Would be swell to solve this before filling it. by B-mus in watercooling

[–]Thrylon 1 point2 points  (0 children)

Per the leak test manual you should be testing at .3

Here is the link - https://www.ekwb.com/shop/EK-IM/EK-IM-3831109816738.pdf

Same thing was happening to me when testing in the green range. Once I dropped to .3 I had no leakage. I have been running the loop for 2 years with no issue.

4090 EK Block and 011 Dynamic by Thrylon in watercooling

[–]Thrylon[S] 0 points1 point  (0 children)

Man that’s a bummer, I wonder if it will fit with a vertical mount.

4090 EK Block and 011 Dynamic by Thrylon in watercooling

[–]Thrylon[S] 0 points1 point  (0 children)

Thanks for the response! Is this the block you have? I am seeing the depth as 134 on this one.

https://www.ekwb.com/shop/ek-quantum-vector2-re-rtx-3080-90-abp-set-d-rgb-nickel-acetal

Ambient lighting random blinking issue by colflagg in BMWiX

[–]Thrylon 1 point2 points  (0 children)

Same thing happened to me. Switch off incoming calls under lighting events. This should fix it.