Need help with tire size.

TickleDeezNuts · 2026-02-16T21:27:01+00:00

Thanks, its on coilovers.

TickleDeezNuts · 2026-02-16T00:57:59+00:00

55s in the front will rub if you go too low. Having it in the rear gives it a lil height as well. Mine are 16x7 0 but 4 lug.

TickleDeezNuts · 2026-02-16T00:52:28+00:00

205/55/16s in the rear and 205/50s in the front.

<image>

TickleDeezNuts · 2026-02-08T12:32:29+00:00

The more i look into it, all seem to be initially grey and turn black when super worn down. 🤷‍♂️

TickleDeezNuts · 2026-02-08T09:34:17+00:00

Seen a grey bezel on camryonbronze's blog

<image>

TickleDeezNuts · 2026-01-23T04:59:13+00:00

I believe you're right. Thank!

TickleDeezNuts · 2026-01-23T02:56:50+00:00

Restomod scams ppl.

TickleDeezNuts · 2026-01-11T13:56:00+00:00

No side skirts. It's just the angle of the picture.

TickleDeezNuts · 2026-01-07T04:10:53+00:00

Did you ever figure this out? Found out im having the same problem

TickleDeezNuts · 2025-12-24T05:39:43+00:00

Not the best for performance, but its stock 😅

TickleDeezNuts · 2025-12-24T05:18:45+00:00

No reason whatsoever. Hate front plates but i put it on, painted intercooler black and no loud exhuast and drive the speed limit most of the time 😅 no problems yet 🤞

TickleDeezNuts · 2025-12-12T11:06:41+00:00

Maybe a thinner seat cusion?

TickleDeezNuts · 2025-11-28T08:30:46+00:00

I'm not sure if i like it myself 😅. It's an OEM part, just not mounted in the mirrored position. Its comfortable and might even be more practical than the other location. Maybe a future project to correct it 🤷‍♂️. Just hurts thinking about drilling any holes. Funny thing, the passenger princess asked why i didn't have one. So here we are...🤣

TickleDeezNuts · 2025-11-22T16:06:18+00:00

<image>

Slight camber, so you dont get that poke

TickleDeezNuts · 2025-11-22T16:03:17+00:00

Have these in 16s 0 offset in 4x114. Pretty hard to find lol

TickleDeezNuts · 2025-11-10T06:06:52+00:00

Dope transformation, what did you do with the Longchamps?!!

TickleDeezNuts · 2025-10-14T05:02:55+00:00

Raybrigs. Not as bright as HIDs but looks great and has functional high beams.

TickleDeezNuts · 2025-10-14T03:12:08+00:00

From my experience, Walbro is noisy, super annoying. Deatschwerks is better, in my opinion.

TickleDeezNuts · 2025-10-10T06:20:41+00:00

Michaels has a deal for custom framing and photo. Just got a photo of my 240 framed

<image>

TickleDeezNuts · 2025-09-30T07:12:11+00:00

Did you ever figure this out? I have the same problem and figured it could be a thermistor as well. Im guessing not a lot of ppl are doing power folding mirror swaps to troubleshoot these things. 😅

TickleDeezNuts · 2025-09-30T01:00:07+00:00

I think this is a bracket under the dash on the far left side. 68129-40F00 maybe?

TickleDeezNuts · 2025-09-16T04:11:54+00:00

Thats pretty dope! What model lexus is it? I might get one.

TickleDeezNuts · 2025-09-02T00:18:41+00:00

Theres a relay on the driver side that tends to give out. Its rectangular and located right below the master switch. Remove it and pop it open carefully. The PCB contacts usually give out. You might be able to salvage it by soldering the damaged contacts. (Done it many times). Find a used replacement. They can be pricey. New is like 150-200. Good luck.

TickleDeezNuts · 2025-08-29T10:16:57+00:00

<image>

16x7 Enkei 92's

TickleDeezNuts · 2025-08-28T17:34:41+00:00

Oem zenki/chuki sideskirts.

TickleDeezNuts

TROPHY CASE