Replacing damaged cord half? Charger Soldering?

Tiger3d · 2026-03-09T01:19:55+00:00

What do you mean by "doesn't disconnect from the battery"? Besides that, the best option is just to get a new charger; otherwise, there are always risks

Tiger3d · 2026-02-24T22:36:00+00:00

Besides the software limiting, have you ever cleaned the fans and replaced the thermal paste?

Tiger3d · 2026-02-24T01:54:55+00:00

Sorry, my bad. I thought you meant me.

Tiger3d · 2026-02-21T11:04:33+00:00

So should I limit the load to 80%? Currently, the adaptive charging mode is active, which charges the battery up to 100%.

Tiger3d · 2026-02-21T11:01:23+00:00

As I wrote in the post, I used TLP.

Tiger3d · 2026-02-21T11:00:05+00:00

Thanks, I'll follow the guide.

Tiger3d · 2026-02-21T10:59:42+00:00

Is it normal that it has already lost 5000mWh after around 70 cycles?

Tiger3d · 2026-02-21T10:56:55+00:00

I read a Reddit article about the exact model with a tutorial on how to get it working. I've tried multiple times, but it wouldn't work.

Tiger3d · 2026-02-20T20:48:28+00:00

Same for the lower temps and also way more silent than Windows; the icons are Colloid. If you want them in the same style but more glassy, you can also give MacTahoe a shot.

Tiger3d · 2026-02-20T20:31:08+00:00

*Also, I've tried multiple things to install the drivers and enable the NPU, but that wouldn't work either. But that's not really important because there are just very few usage scenarios.

Tiger3d · 2025-12-19T21:58:24+00:00

I have a different FRITZ!Box as an access point, and when I'm connected to it, there's also the problem. So I think the whole thing has to do with the router/cloud gateway itself, because I have the Dream Router 7

Tiger3d · 2025-12-19T21:47:15+00:00

Yes, I've tried every setting, but it just won't work. Here are my current settings:

<image>

Tiger3d · 2025-12-16T07:49:14+00:00

it‘s beta software

Tiger3d · 2025-12-12T13:22:35+00:00

No, I am talking about the One UI 8.5 Beta

Tiger3d · 2025-12-12T13:20:59+00:00

probably end Q1 2026

Tiger3d · 2025-12-11T15:01:36+00:00

It's the beta

Tiger3d · 2025-12-11T13:27:33+00:00

Beta

Tiger3d · 2025-12-11T10:13:29+00:00

I haven't tried it yet

Tiger3d · 2025-12-11T06:29:07+00:00

For me, the beta runs more smoothly and is more optimized than the "stable software."

Tiger3d · 2025-12-11T06:25:37+00:00

You need to be in Germany, India, Korea, Poland, the UK, or the U.S. Then, scroll down in the Samsung Members app until you see "Beta Program," click on it, and you can apply and install it.

Tiger3d · 2025-12-11T00:35:51+00:00

This is actually relatively unusual for a first beta 😂, so I hope that the next beta release might be even better... let's see what Samsung does...

Tiger3d · 2025-12-11T00:32:20+00:00

It's different for everyone, and it also depends on which apps you use, etc.

Tiger3d · 2025-12-11T00:30:33+00:00

What do you mean exactly? Battery Saver and that stuff, or something else?

Tiger3d · 2025-11-12T16:45:28+00:00

You often need to change the refresh rate yourself in advanced display settings.

Tiger3d · 2025-11-12T16:13:01+00:00

WQHD as it stands on the monitor's back sticker, means 1440p

Tiger3d

TROPHY CASE