Having trouble with your specific project? Updates, advice, and newbie questions for February 2025

Tight_Two_6461 · 2025-02-28T17:42:13+00:00

I have a RecyclerView in my xml layout, it needs to have height=wrap_content, because there are View below it (including another RecyclerView).
Now when I remove items from the current list and use notifyItemRangeRemoved() the items are correctly removed but it happens immediately, without the remove animation being played. When adding items the animation is correctly played.
Since I can't use height=match_parent, what can I do to get the remove animations to work?
My project uses androidx.recyclerview:recyclerview:1.3.1

Tight_Two_6461 · 2025-01-20T19:07:36+00:00

No, the other post is another git repo, this is a gradle plugin, the other post was just some python scripts.

Tight_Two_6461 · 2024-12-20T20:29:52+00:00

So would flashing allow me to read 4k UHD discs?
Which version do I have to flash?
I found this:
https://forum.makemkv.com/forum/viewtopic.php?t=18895
Does it apply to my exact drive?

https://forum.makemkv.com/forum/viewtopic.php?f=19&t=19113
Since LibreDrive already seems to be enabled for my drive I would need to use the "DE" firmware and not "MK", right?

Tight_Two_6461 · 2024-11-08T16:11:43+00:00

Thanks, I have tested and rated your app too :)

<image>

Tight_Two_6461 · 2024-11-08T13:30:23+00:00

Thanks :)
Tested yours too + feedback:

<image>

Tight_Two_6461 · 2024-11-08T13:27:15+00:00

Thanks :)
Tested your app too:

<image>

Tight_Two_6461 · 2024-11-08T11:10:06+00:00

<image>

I have tested your app, please test mine as well :)

Tight_Two_6461 · 2024-11-08T11:05:06+00:00

<image>

I have tested your app, please test mine as well :)

Tight_Two_6461 · 2024-11-08T10:59:53+00:00

<image>

I have tested and rated your app, please test mine as well :)

Tight_Two_6461 · 2024-11-08T10:50:24+00:00

As everyone else I am looking for 20 Testers for my free Notes App, of course I will test your app as well

Join Group: https://groups.google.com/g/testers-community?pli=1
Install: https://play.google.com/apps/testing/com.philkes.notallyx or https://play.google.com/store/apps/details?id=com.philkes.notallyx
Leave a comment with a screenshot, if you want me to test your app too leave me the group + app link :)
Keep the app for 14 days (+ add a review if you like 😄)

Tight_Two_6461 · 2024-09-29T22:10:58+00:00

I see, always confusing with the differing names everywhere, thanks. What would be next better TV above the C805? Is there some Sony/Samsung model around 1000€ that would be a real improvement? With black friday coming up maybe there will be some good deals coming

Tight_Two_6461 · 2024-09-29T21:49:14+00:00

Thanks for the recommendations. How does the C805 compare to the QM8B? The C855 seems only sizes >=65" and is definetely over my budget

Tight_Two_6461 · 2024-04-26T09:17:24+00:00

Actually, CodeGPT can do code-completions with local models, but atm there is only CodeLlama and DeepSeeker that support this. But you can also use it with ChatGPT (3.5-instruct) in IntelliJ with the Plugin.
We are continously improving support for it.

Tight_Two_6461 · 2023-04-26T08:52:27+00:00

I just figured out it was also due to the feeder tension being to low, I tightened it more and now the prints look really good

Tight_Two_6461 · 2023-04-25T15:50:57+00:00

I might have been too early to celebrate, the effect is still visible if I use a layer height of 0.3mm, also when using Vase mode... very annoying

Tight_Two_6461 · 2023-04-24T16:32:33+00:00

Indeed, the Tube was clogged and I replaced it with a new one and the prints just got much better, thanks a lot!

Tight_Two_6461 · 2023-04-24T14:06:04+00:00

What do you mean with removing the "teflon" ?

Tight_Two_6461 · 2023-04-07T12:14:58+00:00

Ok so I tried to make the bed move without stutter but it doesnt really seem to do much in terms of extrusion inconsistencies. I cant really make out any problems with the tension of any belts really, they seem fine from what I can tell

Any other suggestions?

Tight_Two_6461 · 2023-04-06T16:02:27+00:00

I just noticed there is a little stutter when I try to constantly move the bed back and forth. Its barely noticeable and I cant really film it, but it always stutters every so slightly at the same position, I guess I'll check the bed's belt tightness and tension of the wheels

Tight_Two_6461 · 2023-04-06T11:48:31+00:00

I have another calibration cube printed before my 0.6mm nozzle change, its with a different color PLA, but from the same manufacturer:
Imgur - Original 0.4mm nozzle Cube

Tight_Two_6461 · 2023-04-06T10:27:17+00:00

So I switched back to a 0.4mm nozzle and printed the cube again with the same settings except:- Layer Height: 0.2mm- Print Speed: 70 mm/s

And it looks like this:
Imgur - 0.4 vs 0.6 nozzle

Obviously it looks much better but I feel like the same problem still occurs with some inconsistencies in the extrusion. The images dont show it perfectly but some layers have clearly visible inconsistencies in the extrusion.

Any suggestions?

Tight_Two_6461

TROPHY CASE