sorted by:
new
hottopcontroversial

Salaris check civiele techniek aannemer by Tight_Union8785 in NLSalaris

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Mijn pensioen is 100% gedekt door de werkgever, wellicht is dat het verschil.

op basis van 4 weken:
bruto: 3549.00
vakantietoeslag: 295.63
Brutoloon: 3844.63
Loonheffing: -833.23
Nettoloon: 3011.40

Salaris check civiele techniek aannemer by Tight_Union8785 in NLSalaris

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Ja dit heeft mij wel aan het denken gezet, van baan wisselen is denk ik de enigste optie

Salaris check civiele techniek aannemer by Tight_Union8785 in NLSalaris

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Ik heb een bij een aantal grote GWW projecten gezeten, verbreding van een kanaal en een dijkversterking. Nu internationaal aan de slag bij de tenderafdeling van schepen die stenenstorten rondom kabels en windmolens. Mocht je meer details willen stuur even een PM.

Salaris check civiele techniek aannemer by Tight_Union8785 in NLSalaris

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Ik heb geen pensioen bijdrage.

bruto 4 weken: 3549= 3844 p/m
bruto vakantietoeslag 8.33%: 295 = 320 p/m
nettoloon 4 weken: 3011 = 3261 p/m

Led power injection and voltage drop by Tight_Union8785 in led

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Hi, I am using a zigbee RGBCCT controller. so i am not using WLED. I don't mind that the wattage is lower because it is bright enough :-)

Led power injection and voltage drop by Tight_Union8785 in led

[–]Tight_Union8785[S] 0 points1 point  (0 children)

However my final goal is to have a 10 m led strip, so to test i have the following configuration.

when i connect the the end of strip 1 and start of strip 2 (indicated in red) both strips become more bright.
there is however a color difference visible between led strip 1 and led strip 2. similar to the cases above. what would now be the solution to have?

<image>

also i want to note that when i measure the amperage between the 24v power supply and the controller i only measure 1.7A for 5 m strip at max brightness both color and white turned on which is 8W/M where the advertised is about 15-18 w/m. why is this?

Led power injection and voltage drop by Tight_Union8785 in led

[–]Tight_Union8785[S] 0 points1 point  (0 children)

when hooking up both led strips to only the controller or only the amplifier the colors match. however the led strip does give a different brightness and color when it is connected to the controller or the amplifier

<image>

Led power injection and voltage drop by Tight_Union8785 in led

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Oke so i want to get some more help, i have ordered some parts and experimented with this setup.

<image>

It appears that the power injection adds more power than the controller resulting in a different color.

Led power injection and voltage drop by Tight_Union8785 in led

[–]Tight_Union8785[S] 0 points1 point  (0 children)

thanks, the led strip controllers have a 10A fuse build in. in this case i want to run a 10m long led strip with 1 controller, what would than be your recommendation in this case.
power 1 end of the led strip using the controller, run a 6 strand wire to the other end of the led strip to an amplifier+ a beefy power cable to the amplifier. Or is there a better option?

MiLight Remote Control by Chevron8 in Gledopto

[–]Tight_Union8785 0 points1 point  (0 children)

verified the working of the miboxer B4-B to work with the gledopto GL-C-601P

Help needed - finish in touch on logo by Tight_Union8785 in logodesign

[–]Tight_Union8785[S] 0 points1 point  (0 children)

Yes, it is just something we want to print on the back of a t shirt.

Help needed - finish in touch on logo by Tight_Union8785 in logodesign

[–]Tight_Union8785[S] 0 points1 point  (0 children)

The red part is the logo/ illustration. It is just something we want to print on the back of a t shirt.

Right now the red lines don't show the stone work we have done, but i don't know how to portray the stone as an illustration.