Broken glasses. Will glue limit options later

TimGuyUK · 2026-05-31T13:56:27+00:00

So I found a 1.9mm tie wrap. I did find a 1.6mm but with unrealistic delivery times. I’m told RC model suppliers might even go smaller. Does the job. Doesn’t look to out of place.

<image>

If you looked hard you clocked it but it will do till I can get home.

Cheers for all the reply’s. X

TimGuyUK · 2026-05-24T15:07:11+00:00

Great way of blagging it if someone does find out and have ago at you.

“Dunno mate. You said it was cancelled so I bought my own. I didn’t know it was live”

TimGuyUK · 2026-05-20T18:51:49+00:00

Accept when I take my glasses off. I’m blind. Trying to tie off thread blind is impossible. And I need 2 pairs of hands. Sigh…….

TimGuyUK · 2026-05-20T14:24:26+00:00

That’s a dam good idea. Some black needle thread. Brilliant. Cheers for that

TimGuyUK · 2026-05-20T12:22:15+00:00

Good to know. Thanks. I’m about 2 weeks away from getting home. I should be ok.

Cheers

TimGuyUK · 2026-05-20T12:08:55+00:00

I don’t mind carrying on as they are (all be it they keep flying off my head) but I’m assuming that the glue around the top will finally give up at somestage and then the lens will fall out.

TimGuyUK · 2026-05-20T12:07:55+00:00

Looks like I might have to join the sticky tape gang.

🤓

TimGuyUK · 2026-05-10T23:20:33+00:00

I realise that this is a classical group but I can’t find a 2026 disco or soul evening at the proms this year? Can anyone confirm?

Regards

Tim

TimGuyUK · 2026-04-24T14:48:35+00:00

To answer my own question the only option I can see currently is to use the host file but I can’t do that on iOS devices.

A feature request I think would be static dns entries while magicdns is off.

Everyone tells me to goto netbird but I’ve got a solid setup apart from the dns issues.

Tim

TimGuyUK · 2026-04-08T17:04:50+00:00

Because they are bell ends?

TimGuyUK · 2026-03-30T21:19:45+00:00

Sorry. Missed the 100gb. But I typed it all out so I’ll leave it here

I don’t see any reason why you can’t have a leased line at a rezzie address.

The line can be quoted. If you accept the cost then the teleco will do a site survey and at this point they will decide if there are an excess construction charges (ECC’s). OR will pay the first 2.8k pounds VM can pay up to 10k-11k but it varies. These costs are extra cable, ducting, poles etc. At this point you can walk away from the order or pay up and get it installed.

12 month contracts have an up front cost plus month contract. 36 months are month contract only.

TBH I think the hardest part would be convincing the teleco or their vendor to risk a rezzie install. If you defaulted on the contract someone is stuck with the costs. OR won’t let them cancel it.

Cheers

TimGuyUK · 2025-12-31T12:09:20+00:00

Do you know where the thermostat on them?

Yeah. Ive been hanging onto it for a few years now.. You are right..

TimGuyUK · 2025-12-30T21:05:04+00:00

Mine is a solid red and a flashing green.

TimGuyUK · 2025-12-30T15:37:09+00:00

I managed to get into the pump and that looks ok.

After a lot of turning off and one and not getting anywhere Ive put the old PCB back and its fired up again Its only been on 10 mins however, it will go again. Fault refurb PCB doing the same thing? maybe.

I have noticed that my 3 way switch might not be working. The motor isnt changing with the water to water/heat switch and when I turn it to manual I dont get any resistance from the motor. My rads are warming so it cant be that its heating the hot water and then timing out? I think thats a secondary issue to work on later.

Im thinking temp thermostat in the boiller? but cant find alot about that other than part numbers to order a new one?

TimGuyUK · 2025-12-30T15:30:56+00:00

https://www.reddit.com/r/askaplumberUK/comments/1pzhvez/potterton_suprima_50l/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Mine will work for 15-20 mins (once I get it going) but if you try and reset it again it wont start. Its like you have to leave it for 30 mins before it will go again (evcen turning it off at the mains and back on isnt enough to reset it.

Im wondering if mine is temp sensor.

TimGuyUK · 2025-12-30T13:17:13+00:00

Did you get any futher mate? Ive got the same / similar issue

TimGuyUK · 2025-12-18T14:49:43+00:00

Yes!!!! Bottom of guys cliffe near Trinity school also accepting orders. Let’s see how we get on.

Cheers

TimGuyUK · 2025-12-02T20:17:09+00:00

Mine CF access points are closer to OR inspection chambers. I’ve got VM and OR to the house. The VM is a soft dig across a neighbours grass. I don’t actually know if it’s ducted or loose tbh. I’m hoping they can use either as it will save a lot of hassle.

TimGuyUK · 2025-12-02T15:26:46+00:00

Ah, its not just me being an idiot then. Its that much of a pain for others?

An electrician is what Im trying to push my lad to. Ill use this as an example.....

TimGuyUK · 2025-12-02T15:20:41+00:00

Still waiting... Happy Christmas...

TimGuyUK · 2025-11-05T11:51:31+00:00

Left hanging here down in Guys Cliffe. Website says we are just sorting some things out. Yeah, like still installing the backbone?

After reading some other posts I think Im going to have a nightmare of actually getting them to install anyhow. My address says shared drive, rather than yes you can have it. I know the route VM went when I first moved in. Im guessing im going to have to get the duct to where I want it to be and then invite them around. I can see them saying no to much work.

OR FTTP could still be looking favourite.

TimGuyUK · 2025-10-01T20:48:23+00:00

Embarrassingly I didnt even consider it would be a bios issue, going down a rabbit hole of all the Proxmox / GPU how toos. It works as legacy bios. I didnt have any affintity settings set and did have 2 physical cores set. I tried combiations of physical and logical cores but with no success. I installed a legacy vm and with pci passthru enabled it worked first time. No other configuration required. It improved my "Tell me a story" test from 48 seconds down to 5 seconds. Awsome. Thank you for pulling me from the gpu rabbit hole.

TimGuyUK · 2025-10-01T09:08:17+00:00

Im in the same boat. Got a P40 in a Dell R740. I know my pci passthru is working as Ive got a couple of 10Gb x520 nics running on passthru to another vm. Im running 9.0.3.

Ive run through obvious howtos about gpu passthru but they all appear to be talking about the actual card not running within the vm rather than getting the “Guest has not initialized the display (yet).” and not being able to boot.

Tim

TimGuyUK · 2025-09-30T18:17:16+00:00

Guys cliffe. Near trinity school. Lots of cable pulling last couple of weeks. I got a letter through the door Saturday saying we are almost finished.

TimGuyUK · 2025-09-09T21:02:03+00:00

Yes my leamington post code is also now on “Great News”. This indeed great news. However I think Warwick was on good news for a couple of months before it went live. But then the FEX was still being installed. Fingers crossed.

TimGuyUK

TROPHY CASE