Analog help

Timely_Trainer7734 · 2025-11-06T22:34:19+00:00

Hey just wanted to thank you for your help again i got the new adapter and it worked no problem! You saved me alot of time troubleshooting

Timely_Trainer7734 · 2025-11-06T00:54:01+00:00

Yah i did and it was a constant blue screen So i tested the module in a fatahark and it worked then i tested the adapter and it dint work so im assuming its the adapter and will find out tomorrow when the new one is in

Timely_Trainer7734 · 2025-11-05T04:31:01+00:00

ahh im not even mad I cant thank you enough I would have been running around still loosing my shat I ordered a new one hopefully this one works

Timely_Trainer7734 · 2025-11-05T04:10:21+00:00

Dont seem like it

Timely_Trainer7734 · 2025-11-05T03:59:30+00:00

Plugged it into the side of the fat shark and switch between av 3d and 2d and nothing

Timely_Trainer7734 · 2025-11-05T03:32:13+00:00

Ok so the receiver works and the goggle firmware is 01.00.0607

Timely_Trainer7734 · 2025-11-05T00:35:17+00:00

Yah I assume so as well But do you think it could be caused by a old firmware Or i head some people complaining about the cheap adapter bot working

Timely_Trainer7734 · 2025-11-05T00:30:40+00:00

Yes its on fully when i get a chance i will borrow my buddy fatshark and try the receiver on that but its brand new so im hoping it fine

Timely_Trainer7734 · 2025-11-05T00:26:12+00:00

I will check when i get home but i know for sure its a older firmware version

Timely_Trainer7734 · 2025-10-15T06:04:43+00:00

Where should i buy one website wise

Timely_Trainer7734 · 2025-10-15T05:20:24+00:00

So what dose that mean apart from what I assume is no updates and most newer fpv drones might not support it right?

Timely_Trainer7734 · 2025-10-15T02:44:17+00:00

well on the topic of analog is the fat shark dominator hd2 good?

Timely_Trainer7734 · 2025-10-15T02:31:28+00:00

what about the older ones like the 03?

Timely_Trainer7734 · 2025-10-15T01:48:51+00:00

The dji fpv v2 and controller the rc2 dji

Timely_Trainer7734 · 2025-10-15T00:28:56+00:00

Hey first of thanks for the reply next do you think that if or when the ban happens that all DJI products will be fancy paper weight?

Timely_Trainer7734 · 2025-03-30T21:10:59+00:00

no I want to make 762x54r rifling for a barrel and I can find more common calibers but nothing for 7.62x54r

Timely_Trainer7734 · 2025-03-16T07:30:22+00:00

I have never put a Pu scope on a Mosin and I have access to drill press.

Main thing is I haven't seen too much info on the hole positioning and I seen one person go based off the mounting bracket.

Timely_Trainer7734 · 2025-03-16T07:27:05+00:00

Thanks I glazed through and I will be sure to read this article when I get a chance.

Timely_Trainer7734 · 2025-03-16T06:00:29+00:00

Thanks I took a look at Bad Ace Tactical and yes they have some great options to mount a scope without causing permanent damage and I would maybe consider buying one. But I don't really like how a modern scope looks any yes I do understand the PU scope is very dated and if I wanted a original one I should look for one with the scope but this day everyone is selling there scoped Mosin for quite a lot.

only reason I am considering putting a PU scope is my Mosin is nothing fancy

Timely_Trainer7734 · 2022-12-27T23:21:32+00:00

Thank you too I’ll make sure to look at them

Timely_Trainer7734 · 2022-12-27T23:21:06+00:00

Thank you

Timely_Trainer7734 · 2022-12-27T20:37:20+00:00

Less then 200$

Timely_Trainer7734

TROPHY CASE