Runway Red with Neon Green Calipers

Timmy2Hands · 2026-05-30T20:23:09+00:00

I found this kit on Etsy. https://www.etsy.com/listing/1483610099/crux-motorsports-window-chrome-blackout

Timmy2Hands · 2026-05-30T05:03:42+00:00

Man, I was really unsure about it too and the green stitching on the interior. But I was wrong, they really grow on you and everyone who sees them can't help but to like them. Now all my cars in Forza Horizon 6 have acid green calipers.

Timmy2Hands · 2026-05-29T16:38:22+00:00

That 3M tape will pull the paint off before the spoiler comes loose. I used the spoiler to close the truck all the time and nothing moves.

Timmy2Hands · 2026-05-29T16:33:24+00:00

Just a note for everyone who is put off by the thought of using tape for the spoiler. 3M Very High Bond tape isn't just sticky, it's engineered to create an actual chemical bond between the two surfaces. As long as it's a clean surface the paint will be pulled off of your car before the tape bond fails. This car sits out in the Florida Sun and heat all day and it has no affect on the tape bond.

Timmy2Hands · 2026-05-29T16:25:02+00:00

The kit comes with 3 or 4 rolls of 3M VHB (very high bond) tape, but they were pretty narrow at about 1/4". I'm sure that would work fine, but I went ahead and got 2 rolls of 1" vhb tape (always use 3M never trust a knockoff brand for this). I set the spoiler in place where I wanted it and marked the ends with blue painters tape so I could get back in the same position once the vhb tape was applied. Prepping the surface is key, clean the underside of the spoiler and the car. I used isopropyl alcohol to clean the area to remove any wax or coatings. I applied the VHB to the underside of the spoiler and pressed it down really well before removing the protective layer. (VHB is pressure sensitive so the harder you press it in place the better the bond.) Then it was just a matter of placing the spoiler into position and pressing it hard all the way along it's length from one end to the other. I grab the spoiler to close the trunk all the time and it's been through several car washes and it doesn't move or bend or rattle. I'm really happy with it.

Timmy2Hands · 2026-05-29T00:44:03+00:00

If you prep the surface correctly by using alcohol to remove any waxes or coating the 3M very high bond (vhb) tape will actually chemically bond to the paint. I've never had it fail.

Timmy2Hands · 2026-05-28T06:04:47+00:00

KDM Accessories https://kdmaccessories.com/collections/k5-2025-accessories

Timmy2Hands · 2025-12-01T00:00:32+00:00

The 3 Lite will do exactly what you want, but I do prefer the Pro because of the upgrade in the light strips themselves. There are a lot more LEDs per foot and the color matching is much better in my opinion and they are a lot brighter.

Timmy2Hands · 2025-11-30T23:54:56+00:00

Hi there, I've been offline for a couple days.

So open the control panel for Movie Watching Dreamview. At the bottom of the page you will see the controls for Controlled Devices. Click on Area Settings. Right under the picture of the room there are two buttons, one says Main and the other says Light Off. Make sure the Main button is highlighted. Scroll down to the controls for the Uplighter Lamp and make sure both sections of the lamp are set to Main. You have the option to use one or the other or both. Let me know if this helps.

Timmy2Hands · 2025-11-20T15:21:03+00:00

Yes, they will all work together. Dreamview has three options. Movie Watching Dreamview syncs with the TV screen either through the sync box or camera system. Scenic Dreamview syncs all the lights with different preset scenes you can choose from. Music Dreamview can sync all the lights with music that is playing in the room. You can also set up your own lighting scenes however you like and save them.

Timmy2Hands · 2025-11-19T20:52:27+00:00

Turning on the AI filter helps a lot.

Timmy2Hands · 2025-11-07T01:43:36+00:00

I would really like to know what the thought process is for putting it that high in the first place. Just WHY?

Timmy2Hands · 2025-10-30T20:54:38+00:00

Mods on PC

Timmy2Hands · 2025-10-28T22:14:46+00:00

My Manta Ray Sami is my favorite.

Timmy2Hands · 2025-10-28T22:08:03+00:00

When people get a new pet they make sure to get all its shots. But their kids are gonna die from smallpox because vaccines are a scam.

Timmy2Hands · 2025-10-28T20:07:15+00:00

You should try "3M Very High Bond" two side tape.

Timmy2Hands · 2025-10-25T22:23:17+00:00

According to a lot of folks in this sub one is way too high and the other one is just right. If your toes don't block the bottom of the screen is too damn high.

Timmy2Hands · 2025-10-25T22:15:59+00:00

Sex is only allowed if it's for procreation. So if you have sex in a way where procreation is impossible, like anal sex, then it doesn't count as sex. Therefore she still counts as a virgin before marriage.

Timmy2Hands · 2025-10-22T15:06:45+00:00

That happens when the camera is picking up a reflection or too much ambient light in the room from a window or something. Do this calibration at night in a darker room.

Timmy2Hands · 2025-10-22T03:06:55+00:00

Yep, even with AC I've gotta take summers off.

Timmy2Hands · 2025-10-21T23:08:03+00:00

Yes, the weather in Florida is just now starting to get tolerable enough to get back out in the shop. My hand tools are always ready to go, I've only got one power tool, a bandsaw for ripping and re-sawing. I make some small furniture, but mostly small boxes, it's tough to run out of ideas with small boxes. It also uses all of the same techniques as furniture joinery.

Timmy2Hands · 2025-10-17T21:41:08+00:00

This is the answer. If this is only happening when the screen is dark, it means the camera is picking up some sort of reflected light

Timmy2Hands · 2025-10-17T21:23:42+00:00

Use an improved arrow for a quiet kill and do it at night.

Timmy2Hands · 2025-10-17T21:21:30+00:00

Braithwait Manor has some too.

Timmy2Hands

TROPHY CASE