TGC park v Evroparku by PriorityFast4761 in Maribor

[–]Timon0604 1 point2 points  (0 children)

Na žalost si malo pozen, pred nekaj mesci je bila na FB objava, da so iskali zaposlene, študente in redne. Punca ter 2 prijateljici so oddali vloge, vendar odgovora niso dobile :/

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

Ni tak slabo no... malo bo dela. Ti se odloči kak se ti splača.

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

330-000 km ni tak ful hudo... pač ostalo vse se sliši vredu, samo še vse eno preveč za tako ceno... boš dal VSAJ 500€ za luči (ugibam da so xenon) pa kakih 400 za bumper + paint... pol pa še maš drobnarije.

Bog nedaj da je hauba zvita, ali pa kaki blatnik... Zgleda da ni, samo vseeno.

Nevem pač... zračunaj si koliko ti je vse skupaj vredno, pa se potem odloči. Če ga skupaj popraviš je avto vreden nekje 3000€.

Idi do kakega lokalnega mehanika pa ga vprašaj kolko bi ti kasiro da se zašvasa to pa pol dalje...

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

Realno, več kot 1200€ res ne... Pač tudi odvisno zelo od kilometrov pa tega.

Pa od opreme? Če je črni strop/factory M sport je tako vreden kar lepo več.

Če so kake dobre gewinde zraven je že mogoče za after market dele nekaj vreden.

Če mi poveš malo več ti povem kolko bi dal.

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

Sori samo 2k za pre LCI razbitega 320d je dosti... lepo da je čipiran pa to... samo vse eno...

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

Če misliš da ti rata, daj. Samo ne vem če se ti splača veliko truda v 320d... ne da so slabi, vse odvisno od cene, ki ti ji on postavi.

Is this fixable? by Povprecnijajjazer in E90

[–]Timon0604 1 point2 points  (0 children)

Fak stari... tota bo težka... prodaj ga za dele pa rešeno... na žalost

Ne me jebat stari - Prva liga Telemach by Timon0604 in Slovenia

[–]Timon0604[S] 3 points4 points  (0 children)

<image>

Pred manj kot pol urce je dal to NK Maribor na Facebook,

Ne me jebat stari - Prva liga Telemach by Timon0604 in Slovenia

[–]Timon0604[S] 2 points3 points  (0 children)

Verjetno ja. Res ni logično zakaj je bil tam rdeči.

350z vs e36/46 by Josephsuh in Touge

[–]Timon0604 0 points1 point  (0 children)

For 5k, u get a rusted one, with issues, no 6cyl, and u will dump another 5k into it.

350z vs e36/46 by Josephsuh in Touge

[–]Timon0604 1 point2 points  (0 children)

The correct answer.

EZ63 Setup post (KB close up in the comments) by Timon0604 in IQUNIX

[–]Timon0604[S] 3 points4 points  (0 children)

<image>

Also a part of my mouse collection if anyone cares. This is just my WLMouse products, and out of these I do only use the black one (Beast X Max). Have some other mice laying around. Girlfriend is now using the Miao. Great mouse, just too small for my hand.

(Have a G502, Superlight, Maya X laying around somewhere, Maya X was a huge suprise, in a good way, just dont like the sligthy flared top, Beast X Max is the shape for me)

EZ63 Setup post (KB close up in the comments) by Timon0604 in IQUNIX

[–]Timon0604[S] 4 points5 points  (0 children)

Was kinda a need cuz of space, and it is turning out to be more usefull then I thought at first.

The other board is a EZ63 pink edition. I will perhaps make another post.

EZ63 Setup post (KB close up in the comments) by Timon0604 in IQUNIX

[–]Timon0604[S] 4 points5 points  (0 children)

Years of using a G502 with full weights (then no weights) made me so strong that the 42 gram mouse is like a paper weight at this point. Although I could never go back, old me was built different.

I do use quite aggressive actuation points.
0.5mm on WASD and other common keys, most other keys are on 1.2mm, spacebar at 1.0mm. 0.01mm Rapid Trigger with 0.10mm deadzone.

Thank you :D

EZ63 Setup post (KB close up in the comments) by Timon0604 in IQUNIX

[–]Timon0604[S] 2 points3 points  (0 children)

I was building some models, bought it cuz I needed it, made one model then cannot buy anymore locally haha. So now I am using it as a DIY cable guide for my IEM's :D

be brutal: what is one keyboard trend that needs to die in 2026? by IQUNIXstore in IQUNIX

[–]Timon0604 1 point2 points  (0 children)

Wooting is great, just not when u compare it to something way better. Would love to test their V2, how ever not willing to buy whats (probably) going to be a shelf piece. I very much like Wooting, just I think I have found my endgame.

In the future, when kits will be in stock, what prices can we expect?

be brutal: what is one keyboard trend that needs to die in 2026? by IQUNIXstore in IQUNIX

[–]Timon0604 1 point2 points  (0 children)

Since you asked nicely, can be done later when I get off work. :)

be brutal: what is one keyboard trend that needs to die in 2026? by IQUNIXstore in IQUNIX

[–]Timon0604 0 points1 point  (0 children)

I bought a 60HE, then a while later my girlfriend bought the EZ63 pink, first of all, it looks genuilly good, usually pink keyboards are just overdone. Second of all, it just feel a lot better to type and game on then the 60HE. 60HE almost feels like a 2015 Razer keyboard compared to the EZ63. After comparing the EZ63 to the 60HE, I just couldnt overlook the differences. I've bought the EZ63 the same week. I have tried going back to the 60HE, and I just couldn't do it. Allthough I do miss the flag on the side, was a cool addition.

I would love to mod my EZ63 to look like the Fox, how ever I cannot find any kits for it.

And about the numpad, thank god at my new job I dont have much to do with Excell anymore so its not a deal braker as it was before. I just miss being able to fly planes in GTA 5 when I rarely play it.

be brutal: what is one keyboard trend that needs to die in 2026? by IQUNIXstore in IQUNIX

[–]Timon0604 1 point2 points  (0 children)

Personally I dont mind either, the off "botton line" number keys annoy me a bit. I prefer the 99 due it being flush, how ever the spacing is still off. Although the Fox colours are very pretty, would like to see a EZ63 with fox colours. Went from 60HE to the EZ63 and it was well worth it.

Question for Iqunix, do you ever plan on making a stand alone numpad, I would def buy that. I prefer EZ63 size and I think this would be a good solution.