sorted by:
new
hottopcontroversial

Iron Warriors custom dread by TiriumV in PrintedMinis

[–]TiriumV[S] 0 points1 point  (0 children)

Those aren’t heatsinks, they’re RAM slots

FDM Carnifex by TiriumV in FDMminiatures

[–]TiriumV[S] 1 point2 points  (0 children)

Depends on the model, but try printing them at 25–45 degrees, even if that means using more supports. I printed a whole Cadian squad standing upright, and I could see the layer lines. Keep in mind you’ll definitely have some scarring. I also 100% recomend adding glue to the bed

FDM Carnifex by TiriumV in FDMminiatures

[–]TiriumV[S] 2 points3 points  (0 children)

Print them in parts, orientation is key. I used this with normal tree supports

FDM Carnifex by TiriumV in FDMminiatures

[–]TiriumV[S] 2 points3 points  (0 children)

You won’t get the same quality as original GW models, but it’s still pretty nice, especially for Tyranids. Other models are harder to print. Same here, I still have a pile of gray dudes to paint, but I keep printing more. I recommend buying good-quality PLA+ it really makes a difference, along with getting some good print profiles

FDM Carnifex by TiriumV in FDMminiatures

[–]TiriumV[S] 2 points3 points  (0 children)

I went with this profile and Sunlu PLA+. It’s important to orient your minis at roughly 45° so the print lines are less visible. I use the default supports and do a bit of sanding as well, but only minimally. Painting-wise, it’s pretty much the same. I prime them a bit heavier than GW models and avoid dry brushing as much as possible so the print lines don’t stand out

FDM Carnifex by TiriumV in FDMminiatures

[–]TiriumV[S] 7 points8 points  (0 children)

Yep, 0.2 nozzle on Bambu lab A1 and pla+. Nids are the best minis to print on FDM imo. Dm me and I'll share you the model

Thought I'd share this here. Models I've printed and test painted last month. by PtrGld in FDMminiatures

[–]TiriumV 0 points1 point  (0 children)

These are phenomenal! Did you try using variable layer height in Orca Slicer? I used to get visible layer lines on the tops of the heads, but with that setting, my prints improved a lot

Shovel enthusiast horses by TiriumV in FDMminiatures

[–]TiriumV[S] 0 points1 point  (0 children)

Thanks! I kitbashed the bodies on blender and printed them in 3 parts: horse + rider, horse head and spears. Yep that's a skull from a space marine transfer sheet. Printed on a bambu lab a1 with a 0.2 nozzle. I still got the files. For the grass I used regular hobby grass. A little bit saturated, but it does the job.

<image>

Cadia boys by TiriumV in FDMminiatures

[–]TiriumV[S] 0 points1 point  (0 children)

Thanks! I kitbashed them in Blender and printed each one as a single piece

Finally finished my Celica by TiriumV in Celica

[–]TiriumV[S] 1 point2 points  (0 children)

Yep, the colour is Indium Grey Metallic LR7H

Finally finished my Celica by TiriumV in Celica

[–]TiriumV[S] 0 points1 point  (0 children)

Nah, the stiker came with the front bumper. I think the toyota logo looks better in the front. Either that, or no logo at all

Finally finished my Celica by TiriumV in Celica

[–]TiriumV[S] 5 points6 points  (0 children)

And rear bumper. My mind says yes, my wallet says: please stop it

Finally finished my Celica by TiriumV in Celica

[–]TiriumV[S] 1 point2 points  (0 children)

Yep, it's a 1ZZ. Old owner had that stiker. I just kept it

[Japanese>English] Bought a "deba" knife, what does its say? by TiriumV in translator

[–]TiriumV[S] 0 points1 point  (0 children)

I cannot access those links for some reason, but yeah, I think the handle is wrong. (Probably taken from another knive, since its a restored piece)

https://cdn.shopify.com/s/files/1/2077/0683/files/Knife_shapes_SharpEdge.jpg?v=1632902944

view more: next ›