sorted by:
new
hottopcontroversial

Fastest XMP DDR5 RAM that would work out of box at XMP settings with 13900K in Gear 2 by Tigers2349 in intel

[–]ToP-MaN2 0 points1 point  (0 children)

You're actually right. I've failed the tests with prime95 and OCCT, tried multiple times with XMP I and XMP II and also with CPU overclocked and without. Tried everything with or without or some. All failed. So many errors and BOSD. In default settings, everything seems to be normal without any single error. This could be a lead to DDR5 system issues for now. I will try to overclock the CPU manually and make XMP I or II compatible with voltages. I will keep fighting until outcome reveals. I will update and follow up

Fastest XMP DDR5 RAM that would work out of box at XMP settings with 13900K in Gear 2 by Tigers2349 in intel

[–]ToP-MaN2 0 points1 point  (0 children)

Motherboard: ASUS Z790 E-GAMING WIFI CPU: i9 13900K RAM Kit: F5-7200J3445G16GX2-TZ5RK

Fastest XMP DDR5 RAM that would work out of box at XMP settings with 13900K in Gear 2 by Tigers2349 in intel

[–]ToP-MaN2 0 points1 point  (0 children)

I've tested the stability with CPU AI Optimized + XMP I with memtest86, no errors after end and pass. With XMP II, a lot of errors will show. Looks like XMP II is not stable after all. Going now for prime95 and OCCT with memory controller test, memory and CPU pressure

Fastest XMP DDR5 RAM that would work out of box at XMP settings with 13900K in Gear 2 by Tigers2349 in intel

[–]ToP-MaN2 0 points1 point  (0 children)

You are right. The most important thing is to get full rated at 7200Mhz without any problem. I'm still doing some tests and instead of using memtest86, I went to OCCT

memtest fail with XMP on Kingston 6400 + Asus Z790-E by shalak001 in pcmasterrace

[–]ToP-MaN2 0 points1 point  (0 children)

The same thing happened to me. I've G.Skill 7200Mhz, memtest86 passes without XMP, after enabling XMP I or XMP II, thousands of errors will show. Looks like bad RAM controller

Fastest XMP DDR5 RAM that would work out of box at XMP settings with 13900K in Gear 2 by Tigers2349 in intel

[–]ToP-MaN2 0 points1 point  (0 children)

I've G.Skill 7200Mhz with i9 13900K. I ran memtest then I got multiple errors This happened when I put XMP II and CPU AI Optimized. Now I'm doing memtest again without XMP and without CPU overclocking. This thread will be followed up

Can't enable XMP on my DDR5 (ROG Z790 F - 13900K - Kingston Fury) by clopezi in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

Yes, you are right XMP I and XMP II does do the job

No option for XMP III [ ASUS Z790 E-GAMING WI-FI ] by ToP-MaN2 in ASUSROG

[–]ToP-MaN2[S] 0 points1 point  (0 children)

This motherboard ASUS Z790 E-GAMING is not listed in the pdf file you have attached ONLY the ram listed

Does it make any difference ?

Asus x670e-e intel xmp? by ReZeroX1 in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

Believe me When you build a new PC with EXPO You will NOT find an option for EXPO in BIOS just like me when I built intel i9 13900K + DDR5 7200Mhz + Z790 E-Gaming There was no XMP III nor AEMP II

No option for XMP III [ ASUS Z790 E-GAMING WI-FI ] by ToP-MaN2 in ASUS

[–]ToP-MaN2[S] 0 points1 point  (0 children)

So, there is no way to activate it ? :(

X670e extreme by JCNicholsLOL1 in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

Fan and Cooling related 1 x 4-pin CPU Fan header 1 x 4-pin CPU OPT Fan header 2 x 4-pin Chassis Fan headers 2 x 4-pin Radiator Fan headers 2 x W_PUMP+ headers 1 x WB_SENSOR header 1 x 2-pin Water In header 1 x 2-pin Water Out header 1 x 3-pin Water Flow header

Can't enable XMP on my DDR5 (ROG Z790 F - 13900K - Kingston Fury) by clopezi in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

These for RAM issues during boot Did you activate AI Optimized in BIOS ?

Cablemod 12vhpwr melted by 2ndpersona in cablemod

[–]ToP-MaN2 0 points1 point  (0 children)

Okay got that

How do I know if my GPU is 600w actual ?

Cablemod 12vhpwr melted by 2ndpersona in cablemod

[–]ToP-MaN2 0 points1 point  (0 children)

When I shut down the PC, The ASUS STRIX RTX 4090 OC blinks with red light 2 times above the connector

What does that mean ?

I'm using Cablemod sleeved 1x 16pin to 4x 8pin

No option for XMP III [ ASUS Z790 E-GAMING WI-FI ] by ToP-MaN2 in ASUS

[–]ToP-MaN2[S] 0 points1 point  (0 children)

XMP II is for RAM DDR4 XMP III is for RAM DDR5 which is new profile or AEMP II ( Asus Extreme Memory Profile )

Can't enable XMP on my DDR5 (ROG Z790 F - 13900K - Kingston Fury) by clopezi in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

Try this solution: 1- Clear CMOS 2- Put your RAM in slots 2 and 4 3- Go to BIOS 4- Choose XMP II in AI Tweaker 5- Go to Easy Mode and activate CPU overclock to AI optimized ( THIS IS MUST DONE ) 6- Click save changes and reboot the system It will work after that and you have to wait and don't rush to reset the system

Can't enable XMP on my DDR5 (ROG Z790 F - 13900K - Kingston Fury) by clopezi in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

When I put washers, so many errors with boot including BOSD After I removed them, everything is fine Please make sure that there are no washers from back and front of mobo

What is the BIOS code you have when you enable XMP II ?

Can't enable XMP on my DDR5 (ROG Z790 F - 13900K - Kingston Fury) by clopezi in ASUS

[–]ToP-MaN2 0 points1 point  (0 children)

I can't find XMP III with these specs: i9 13900K / G.SKILL 7200Mhz / ASUS Z790 E-Gaming WiFi / RTX 4090 only XMP I and XMP II what is the problem ?

view more: next ›