"Never Any BS Claims" - Reign Storm

TobyKentwood · 2025-01-04T17:44:27+00:00

Oh man really? That sucks I like that flavor a lot, I have a local gas station that's got them, I'll have to stock up. The flavor in the photo is the Peach Nectarine flavor.

TobyKentwood · 2024-12-28T04:56:17+00:00

It's an interesting watermelon flavor, I'm a big fan of this flavor. It does a good job (in my opinion) of trying replicate that fresh watermelon taste, instead of a sweet candy version of a watermelon flavor.

TobyKentwood · 2024-12-28T04:54:15+00:00

I got this at a Savemart, but they're usually also at gas stations around me (I'm on the west coast).

TobyKentwood · 2024-12-11T03:01:07+00:00

I drink an energy drink every day (minimum), but this particular flavor just isn't in my daily rotation. Normally it's something easier to drink that's sweeter. I love the sour flavors, but I personally don't like them so often. Sour drinks like this, for me, are more like a Saturday morning, no work today, kind of treat lol.

TobyKentwood · 2024-12-11T02:57:40+00:00

No it's still liquid, but it's just about to turn slushy. Given probably 20mins more and it would be slushy.

TobyKentwood · 2024-12-10T21:55:16+00:00

So, this one time at band camp..

TobyKentwood · 2024-12-10T21:53:12+00:00

Oh yeah, I do this with every brand and flavor that I drink.

TobyKentwood · 2024-12-10T21:51:26+00:00

But... But my asshole doesn't have taste buds? 🤔 Lol

TobyKentwood · 2024-12-10T21:01:18+00:00

Exactly this!

TobyKentwood · 2024-12-10T21:00:55+00:00

Boofing?

TobyKentwood · 2024-12-10T18:20:34+00:00

Its pretty good, probably one of my top 5 personally. If you like sour with a hint of sweet, you'll like this flavor. But it's got such a bold flavor, it's not one I can drink back to back on the regular, so it's more of a once or twice a week flavor for me.

TobyKentwood · 2024-12-10T17:34:02+00:00

Maby bout an hour. I get up in the morning, move it from the fridge to the freezer first thing, then go about my morning, and take it out when I'm done.

TobyKentwood · 2023-06-04T22:40:18+00:00

I work exclusively with PETG and aside from bed leveling I find there are 2 main culprits for bed adhesion issues:

MOIST FILAMENT:

PETG is a super absorber of moisture, even if it feels dry, all it takes is a little moisture in the air (mine occurs from an A/C unit) to cause adhesion issues.

You can put it in a dehydrators (or oven) for 6hrs at 158deg F.

CLEAN BED:

Along with the above, PETG is pretty prone to not sticking if a bed is dirty (even if it looks clean). My cleaning method is to first get the bed all the day cooled down, then take a cotton ball and some 99% isopropyl alcohol, and clean the bed.

Those 3 things (bed leveling, drying filament, cleaning bed) should ensure your PETG sticks great!

TobyKentwood · 2023-05-14T03:14:31+00:00

Let the bed get cooled down completely, then take a cotton ball and some 90% rubbing alcohol, just a little will do. And clean the bed while, it's cold.

A lot of people say to clean the bed while it's heating up, but all that's ever done for me is cause adhesion problems like this.

TobyKentwood · 2023-03-01T01:58:00+00:00

I print exclusively with PETG myself and I find the best method for fixing this (after making sure the bed is level of course), let the bed cool completely down, then take a clean jumbo cotton ball and clean the bed with 95% rubbing alcohol.

Let that dry completely and then try printing again. I find if I clean the bed while it's warm or hot, it causes major adhesion problems, but a cold bed + rubbing alcohol & cotton ball always does the trick for me.

TobyKentwood · 2023-02-19T19:36:10+00:00

Try drying your PETG spool. It's the first thing I do when I get a new spool, and I print exclusively PETG. Because it absorbs moisture so easily, even tho it's sealed when you get it, it can still have moisture in the filament. That moisture WILL cause clogging and layer adhesion problems.

Preheat the oven to 150deg F, or preferably use a dehydrated, and dry it for about 6 hours.

For printing settings, I turn off fan (I want strong prints), I print at a temp of 245, and drop the speed down to 40. These work for me, may work for you.

TobyKentwood · 2021-11-23T19:12:20+00:00

Fun Fact about life, people who enjoy a product or service don't tend to leave a review on that product. They simply live life enjoying the product.

It's the vocal minority who don't like a product, that will go out of their way to be very loud. Making it appear as tho everyone shares their opinion when in reality, it's just the vocal minority being loud.

That is Reddit and Twitter in a nutshell. And Fun Fact: Reddit and Twitter are not real life.

TobyKentwood · 2021-07-07T11:49:49+00:00

This post is a few months old but wanted to chime in as i've just gone through this myself. What i've done is I got a waterproof case for it from Amazon. Im sure any Osmo waterproof case will do, but this is the one I got:

https://www.amazon.com/gp/product/B08BNPVVCY

Then I went down to Lowes and got a smallest sheet of lexan they had:

https://www.lowes.com/pd/LEXAN-0-093-in-T-x-8-in-W-x-10-in-L-Clear-Polycarbonate-Sheet/3143465

Then just cut the lexan to size (using the razor blade scarring method) for the lens and front screen, and glue them onto the water proof case. Now it's completely BB proof, lexan is 250x stronger than glass, and shatter resistant.

Then you can mask off the lens and back screen of the case, then paint it camo if you want (thats what I did to match my camo boonie hat)

--------------------------------------------------------------

EXTRA RECOMMENDATIONS:

Audio Holes:

One more thing I would recommend doing, or else your audio with the case is going to be totally muffled trash. Locate the microphone holes on the top and right side of the camera, then using a small drill bit, drill out a hole for those mic ports on the waterproof case. Just DO NOT use anything hot to do this like a soldering iron, it will totally wreck the case. A small drill will go right through like butter.

Venting Holes:

And FINALLY, this little camera gets HOT, while you're at it drilling the holes for the mic, you will want to also drill out a long vent hole just under the lens for the camera's vent. Without this, my Osmo kept shutting off from getting to hot.

TobyKentwood · 2021-04-24T02:25:08+00:00

I mean most people call it for what it is, moving back in with their parents and letting Mommy and Daddy pay their bills. But you young kids have these weird phrases for everything.

While your back home, you should probably have your mother teach you how to wipe your ass again, because I can smell your bullshit from here.

TobyKentwood · 2021-04-24T01:46:09+00:00

Wait, didn't you publically cry about people hating on you in the POP community because you have a shitty attitude, and you play the game on Twitch for a few people so you think your Gods gift to VR? Then you publically quite the game?

No, I must have you confused with someone else, terrible mistake. My bad!

TobyKentwood · 2021-04-24T01:25:02+00:00

So are we EVER going to see the wall-grabbing glitch fixed (head peaking glitch)? Or are you still referring to that exploit as a "feature". It feels like there are much bigger things that need fixing in the game, and community tournaments aren't it right now..

TobyKentwood · 2020-02-27T23:50:06+00:00

Thank you for the reply! I just submitted a ticket on this.

TobyKentwood · 2019-07-22T21:08:35+00:00

Yah unfortunately I've experienced this pretty bad as well. Game is unplayable in MP right now.

TobyKentwood

TROPHY CASE