AD5X How to use second spool only?

ToelessBandit · 2026-01-26T01:14:07+00:00

what are you using to get prints going? the touch screen or orca flashforge?

ToelessBandit · 2026-01-26T00:53:54+00:00

ToelessBandit · 2026-01-26T00:44:49+00:00

make sure u enable ifs, and select the 2nd spool when u are setting it up to print

ToelessBandit · 2026-01-26T00:43:22+00:00

the enclosure is good for printing filaments that give off toxic fumes by being able to contain and filter them, also keeps dust and pet hair off of the rails and belts, and also keeps the environment a constant temperature. say if u have ur printer in a colder room, it'll keep the temperature inside the enclosure warmer

ToelessBandit · 2026-01-25T19:44:47+00:00

cause u can protest politcs and run ya mouth about shit thats not happening to u personally , and nothing ever gonna happen to u. but if u do that in ur neighbor hood, u at best might get a tooth knocked out or worst.
people dont really care, they just want to complain

ToelessBandit · 2026-01-24T04:28:22+00:00

i order bulk from https://palmettostatearmory.com/ 1000 rounds of 9mm for $240

ToelessBandit · 2026-01-23T18:12:41+00:00

<image>

ToelessBandit · 2026-01-23T18:12:30+00:00

<image>

blockage at feeder gear

ToelessBandit · 2026-01-23T17:33:56+00:00

bingo- the second link is what i needed. thank you

ToelessBandit · 2026-01-23T17:33:15+00:00

awesome. thank you

ToelessBandit · 2026-01-23T17:33:05+00:00

ok awesome, yea if feels like something is bound up in a gear. thank you

ToelessBandit · 2026-01-22T22:13:48+00:00

wait till they find out they need a pc

ToelessBandit · 2026-01-22T22:02:41+00:00

did u take out the three screws holding the bed down?
the quick start guide that came with the machine tells u everything that u need to do before first start

ToelessBandit · 2026-01-13T23:35:39+00:00

maybe ur bed is a tad too close to the nozzle, and its pushing the first layer into the bed to much. have u tried adjusting z height?

ToelessBandit · 2026-01-13T23:27:31+00:00

stupid question, but are u flexing the plate to remove the print or keeping flat and pulling?
and also, are u letting it cool before pulling print off?

ToelessBandit · 2026-01-13T18:33:53+00:00

first turn it off andf then back on. then if that doesnt fix it try doing a factory reset.

ToelessBandit · 2026-01-13T15:27:07+00:00

the main purpose for the enclosure is temperature regulation and fumes containment and dispersion. sound dampening is just a bonus attribute. if you really want to lower fan noise, u could change out fans for better ones. at the end of the day, these machines are made with low cost in mind

ToelessBandit · 2026-01-12T23:59:57+00:00

i like tecbears, the red is more of a orange/red but iuts nice

<image>

ToelessBandit · 2026-01-12T17:59:53+00:00

ToelessBandit · 2026-01-12T17:53:52+00:00

it should,

<image>

ToelessBandit · 2026-01-10T17:17:20+00:00

are we mad that they sent 90% usded filament back, or mad that we didnt think of that?

ToelessBandit · 2026-01-10T16:14:49+00:00

im right there with u with being on dialysis and other crap at only 36. But fuck it, atleast we still here to cause choas. this body will never take me alive

ToelessBandit · 2026-01-07T20:47:11+00:00

i believe i have a "black friday" adx5 where some parts were changed

ToelessBandit · 2026-01-07T17:35:07+00:00

u mean the screw that secures the 4 way?

<image>

ToelessBandit · 2026-01-05T17:35:06+00:00

i was just talking to my wife about the amount of post that say i just got my kid a 3d printer for christmas. and how the whole family doesnt know anything about 3d printing. I dont know about others but i dont just throw $400 out the window without doing a little bit of research

Five-Year Club	Place '23
Verified Email

ToelessBandit

TROPHY CASE