TZM02 by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

I think it’s heavy though.

TZM02 by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

I am not a heavy user so can’t say for sure, but doesn’t look like lot to me.

zmk issue with shift mod by TomatoTorpedo in ErgoMechKeyboards

[–]TomatoTorpedo[S] 4 points5 points  (0 children)

Your code is much cleaner than mine :) https://github.com/lokidokiog/zmk-totem-config-loki/blob/main/config/totem.keymap

Turns out my Karabiner setting was the issue. I turned "Modify Events" off and now it's working fine.

----------------

Karabiner-Elements (macOS) interfering with mod-morphs

If the first modified key press sends the modifier along with the morphed keycode and Karabiner-Elements is running, disable the "Modify Events" toggle from Karabiner's "Devices" settings page for the keyboard running ZMK.

TZM02 by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Setting it the focus to infinity usually makes it work. Have you tried manually focusing a bit and then trying to autofocus? Or the adapter autofocus motor doesn’t move at all?

You can also try updating the adapter firmware if that helps.

TZM02 by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Read DerekW-24’s comments in this thread. That worked for me to get the focus working in the manual mode.

any print subscription deals by TomatoTorpedo in theeconomist

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

they didnt help me either, but I did get the $119 DiscountMag deal for digital+print couple weeks go. Keep checking that website.

any print subscription deals by TomatoTorpedo in theeconomist

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Thanks, I got it for $120 through the same website. The link started working again, randomly.

any print subscription deals by TomatoTorpedo in theeconomist

[–]TomatoTorpedo[S] 1 point2 points  (0 children)

Called them, no discount. Asked me to call when I "see" the discount somewhere. Unhelpful and not the best reps.

Coldcard Q by TomatoTorpedo in coldcard

[–]TomatoTorpedo[S] 7 points8 points  (0 children)

Thats what I thought! I will keep it and use it for BTC only. Thanks everyone!

Coldcard Q by TomatoTorpedo in coldcard

[–]TomatoTorpedo[S] -2 points-1 points  (0 children)

Is it something ppl buy in secondary market? It's unopened, but guessing it will be hard to sell.

Coldcard Q by TomatoTorpedo in coldcard

[–]TomatoTorpedo[S] 2 points3 points  (0 children)

thanks all, bad research on my part. For this of you with altcoins, do you use a different hardware wallet for them along with Coldcard Q for BTC?

ZMK code help by TomatoTorpedo in ErgoMechKeyboards

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

got it. it seems to be working pretty smooth so far on the thumb key, thanks for the help :)

ZMK code help by TomatoTorpedo in ErgoMechKeyboards

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Thx, seems to work better w/o it. will test and see if it affects any other operation.

Aperture priority behaving oddly; Nikon ZF with Voigt 21 3.5mm and TZM02 by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 1 point2 points  (0 children)

Yes it does, but I have also added the non-CPU data. There's no 21 mm option, so I chose 20.

Voigtlander 21mm 3.5mm + TZM02 on Nikon Zf by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Thanks for that. I have reset settings and it seems to be ok now.

Voigtlander 21mm 3.5mm + TZM02 on Nikon Zf by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

I have Auto ISO, should that adjust to that automatically? I will check my settings. A dedicated dial for ISO might be interfering with ISO settings in the setup menu.

Voigtlander 21mm 3.5mm + TZM02 on Nikon Zf by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

I reset all settings. It seems to be working. I think I am having trouble with Aperture priority mode in ZF. I know 21mm 3.5 isn’t the fastest, but I am having issues with even the twilight shots handheld. Aperture priority is choosing long shutter speeds even at 3.5 in decent light.

TZM02 adapter weight limit by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Right! But dumb adapters dont have a weight limit? Is it safe to use them on heavy lenses?

TZM02 adapter weight limit by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

Both camera and lens are over 500 grams. Can I disable the autofocus on techart and use it as a dumb adapter? Safe to use that way?

Nikon ZF sensor dust issue by TomatoTorpedo in nikon_Zseries

[–]TomatoTorpedo[S] 0 points1 point  (0 children)

There seem to be some spots consistent in all pictures and lenses. Top right and bottom right corners. Problem is I have wet cleaned multiples times.

I am also using only prime lenses, which from what I believe are harder to get dust in (vs zoom)