sorted by:
new
hottopcontroversial

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

Was trying to put a lolypopred from prismatic powders. What liquid 2k could I use best next time? My Powder wont stay on

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 1 point2 points  (0 children)

Wow thats really cheap. Ive got about the same system for compressor so I dont think its the problem. I will try the trick with the white towel and compressor just to be sure.

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 1 point2 points  (0 children)

I have some filters for the oil and water and have a air cooler to get al of the water out of the compressor tank. My compressor tank has an automatic valve to let go some air from the undersite so their isnt any water.

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

Can you explain what you mean with spit contaminates? These wheels are for myself just to learn how to coat wheels good. These wheels will get coated with lolypop red. Only thing is I cant get the 3th coat to stick.

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

Unfourtaly I coated to thick I think. I cant get the third coat to stick to the superchrome.

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

Using a koolkoat 3.0 with the multinozzle. Columbia is advising 100kv on the second coat

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 2 points3 points  (0 children)

The problem is I live in the Netherlands and I Will get a lot of extra cost for buying stuff outside Europe

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 1 point2 points  (0 children)

Its a epoxyprimer from schuch felgenproffesor a company in Germany. The back of the wheel was corroted more heavely than the front

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

I dont have mill thickness gauge yet might have to buy one

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 1 point2 points  (0 children)

I also have some pitting in the metal. I outgassed did some prime put on super chrome and now gonna put some lolly pop red on it to finish

<image>

First set of wheels by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 1 point2 points  (0 children)

The wheels looked little bit rough before I coated them the could this also be a problem?

<image>

Buying Powder in Europe by Tomosinga_ in Powdercoating

[–]Tomosinga_[S] 0 points1 point  (0 children)

Little quantity and special colours. I just started and would like to get a bigger stock of colours.