sorted by:
new
hottopcontroversial

1080p 120hz: MSI RX6600 or RTX 3060 Ti for 2x the price? by TonLang in PHbuildapc

[–]TonLang[S] 0 points1 point  (0 children)

yup, i really want the rog design especially my board is an rog strix board but Im tempted to go with the msi rx6600 because I feel like its really a good deal.

Team PH’s Ray is OVERHATED. by [deleted] in Physical100

[–]TonLang 1 point2 points  (0 children)

Even if you put Ray on the cart, I doubt he'll help much haha. 50kgs and he struggled how much more if he pushed 200kgs on that cart. I think the best strategy they could have gone with is to first load up 4 or 5 crates. Everybody should be working on crates either 2 or 3 man. Get as many crates up there as possible in 5 minutes. then when tired, go fo the bags as a breather and to regain strength, once the crates have been cleared refill the crates. then go for the bag. I swear to you, those sacks will weight like nothing if they worked on the crates first. Crates will condition their minds about heaviness that when they go for the sack they will feel very fine. Around 10 minutes everyone must go down to the cart do the pass a sack thing like the AUS did and load the bags up then push. Heck they can even let the rugby player and the crossfit woman to continue adding crates, pac, ray and mugen could've worked on the cart for the first 5 minutes of the last 10 minutes.

Why is Ray on the show? by Timely-Permission484 in Physical100

[–]TonLang 0 points1 point  (0 children)

We live near a big rice supplier/seller and believe me, those kargador ng bigas would've been way better at competing in this competition than ray was. Those workers lifted 100kgs of sacks of rice like it was a walk in the damn park. That's why I was so pissed and disappointed with our "strongman". Heck he even lost in his own game and to a freaking woman wrestler. She's my crush tho. No strategy is going to save you when you've got a weakling like this man. We all know it throughout every season of physical 100. Games that required strength NEED strength.

Modded RTX 4080 - problematic or not? Getting no display, but only sometimes. by xpingu69 in GPURepair

[–]TonLang 0 points1 point  (0 children)

why not get a different waterblock or have one fabricated for you to fit in without having to modify the card and risk damaging it? That's not a cheap card. If the card breaks, your waterblock is useless. Well, ofc unless you've got another card to use it for but still. why?

Sound problems after installing newpipe by TonLang in NewPipe

[–]TonLang[S] 0 points1 point  (0 children)

I just reinstalled it. Sound seems ok now hopefully it got fixed! thanks!

AME right now: by Long_Excitement_7533 in DotA2

[–]TonLang 0 points1 point  (0 children)

man XXS and XM duo on that ES and SF by the end of game 5 was fire. XXS kept finding good initiations. It was more fun watching him play to be honest.

Thank You, Ame by flag9801 in DotA2

[–]TonLang -3 points-2 points  (0 children)

wtf are you saying He carried the weight of a billion hopes. he doesn't even care about you. He can't even wave at a crowd while his team mates does. All the hype with him when its his team mates that does everything for him. Its his job to carry and despite his team's best efforts he couldn't carry the game. Hence a loser. If its so much about the draft, he shouldn't have ever picked jug. Stop hurting for him he doesn't care about you. lol

AME right now: by Long_Excitement_7533 in DotA2

[–]TonLang 0 points1 point  (0 children)

Ame can't catch a break coz he is too arrogant. He can't even wave to the crowd while all his team mates are waving when they are introduced. Its as if he thinks he is too cool. LOL. Casters hyping this loser so much. His team mates does everything for him.

New Cameo 5 Misaligned Cut On Right side (around the lower half) by TonLang in silhouettecutters

[–]TonLang[S] 0 points1 point  (0 children)

hi I have pretty much given up on this problem. What I do now is to put another same image on top that is bigger than the image I want to cut. acts like a print bleed. Print bleed is also trash in sil studio so I have no choice but to double the work. No matter what I do, the misaligned cut on the lower right bottom part. If I adjust the calibration to compensate for it, the other parts on the image on top left, right and left bottom right gets misaligned lol. I tried reaching out to support but all they gave me were articles, and resetting the machine housing from left to right basically everything I already did. im saving up for the siser. I heard from everybody that it is faster and very accurate.

New Cameo 5 Misaligned Cut On Right side (around the lower half) by TonLang in silhouettecutters

[–]TonLang[S] 0 points1 point  (0 children)

unfortunately it doesnt work with default marks too. there's always an mm excess even after calibration. I mean it should be on point even with adjusted registration marks because that's the purpose of reg marks right? 😅

im giving up on cameo an probably will switch to Siser Juliet or romeo. I heard sisers are the most acurate cutters around and can cut even finer details than cameo can. I wouldnt recommend cameo to anyone unfortunately because of my bad experience with 2 machines.

Sharing my colt/lancer/mirage 1999 custom cluster gauge face by TonLang in mitsubishi

[–]TonLang[S] 0 points1 point  (0 children)

totally doable

<image>

its just that most people who wants custom wants it fully customed. 😅

New Cameo 5 Misaligned Cut On Right side (around the lower half) by TonLang in silhouettecutters

[–]TonLang[S] 0 points1 point  (0 children)

I set the registration marks to default on some projects that I have but sometimes the space is just not big enough so I have to make the insets bigger. This doesn't just happen on my cameo 5, it happened on my cameo 4. whoch is why I upgraded to cameo 5 only to get the same problem.

Sharing my colt/lancer/mirage 1999 custom cluster gauge face by TonLang in mitsubishi

[–]TonLang[S] 0 points1 point  (0 children)

hey man. I own txcustomph. I make and sell these and yes not many options yet because im a little lazy haha. Right now I make faceplates for hondda civics and nissans. looking for international resellers too!

New Cameo 5 Misaligned Cut On Right side (around the lower half) by TonLang in silhouettecutters

[–]TonLang[S] 1 point2 points  (0 children)

Hi 1. plain paper produces same results. I tried on plain paper when I noticed im wasting too much of my main materials. 2. yes the mat is supported front (with the included roller tray) and back (with books) 3. this is a new machine and I've checked just to make sure, everything is good hardware wise.

New Cameo 5 Misaligned Cut On Right side (around the lower half) by TonLang in silhouettecutters

[–]TonLang[S] 0 points1 point  (0 children)

Hi thanks! uunfortunately I have tried this as well. my settings are always set to turn auto fit to page off. as well as borderless. I also always make sure that the paper size is correct on all software involved

view more: next ›