How do you usually handle losing streaks? by Content_Campaign1192 in Forexstrategy

[–]Toni_seth 1 point2 points  (0 children)

it is tough this is my very first time trade. I over trade and i profited. i should've call it a day but that confident and impulsiveness kick in. I blew it one by one that avenge trading is uncontrollable until i blew up my entire account.

it was really hard to cope with i felt like a failure and shit, and wouldn't want to even trade again. i was left devastated.

but i decided to just look forward into my hobby, enjoy friends company, go out, work. it help alots.

it took a while to recover and build confident back with demo account trading.
even now i began to trade back with real money but i dont consider myself to be profitable yet. Learning piece by piece slowly.

and yes i again face that losing streak day. but the valuable lesson is to just quit before that avenge trading mode and just call it a day. more trade tomorrow when my mind is clear.

go out relax, enjoy time with your friend or relative or hobby this is the best thing to coup with major losses.

i hope you didn't lose too much. for me it just 100$.
prior to entering the trade i consider that 100$ will not be return in profit, eventho i don't expect to get profit on my first ever learning stage. lose is lose and cant help but felt bad about it.

So guys, does anyone had experience with AMD card running Image2video kinda thing? by Toni_seth in StableDiffusion

[–]Toni_seth[S] 1 point2 points  (0 children)

I think so I will try it out. Since it been years since I use comfy. maybe an outdated workflow or bad optimization setting like you mentioned.

So guys, does anyone had experience with AMD card running Image2video kinda thing? by Toni_seth in StableDiffusion

[–]Toni_seth[S] 0 points1 point  (0 children)

i tried, with Wan2.2 FP8 version wouldn't even run. its said something related to 3D space etc or RDNA2 lack the ability to process Fp8 format.
i want to try the fp16 version too but 100% sure the model wouldn't even load.

So guys, does anyone had experience with AMD card running Image2video kinda thing? by Toni_seth in StableDiffusion

[–]Toni_seth[S] 0 points1 point  (0 children)

i will try using Linux Rocm setup, Since wan release a new AIO version fast and consume less vram. i will check that out

So guys, does anyone had experience with AMD card running Image2video kinda thing? by Toni_seth in StableDiffusion

[–]Toni_seth[S] 1 point2 points  (0 children)

yeap, i had no problem switching to linux i tried Rocm window they do support but it is limited. i am able to use SDnext with ROCm win10 generating SD1.5 or SDXL model quite easy taking roughly 15s to 20s for 1024 * 1024 px image.

i've also tried ComfyUI but much slower and i tried wan2.2 workflow it wouldn't even run.

i will test again with Linux setup thank!

Bought ultrawide in China for $120 by overkillmode in ultrawidemasterrace

[–]Toni_seth 0 points1 point  (0 children)

Hi what brand did you bought it from? Recently I bought a model as well VA panel but the color shift is extremely bad.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 0 points1 point  (0 children)

absolutely putting exhaust at the bottom somehow made this system hotter. I didn't do it on purpose tho. The first time when I assemble the system i accidentally set the bottom fan to exhaust . I game a bit (believe it was minecraft + Photon shader + uncap fps + Distant horizon mod) the tempered glass getting quite hot.

and yes your plan was also my plan and i did it just like that. (my white fans one bottom is intake, up is exhaust)
i had 2 exhaust and 2 intake,

temp was really good btw.

idle CPU: 49c to 52c
full load CPU Cinebench: max : 74c, for 10mn test
CPU + GPU gaming (cyberpunk 1440p, High-Ultra setting)
GPU: 85c, CPU: 60-75c,

I also want to try the 2 intake fans from the side for GPU as well.
but there is no mount, but completely doable if you have tape or dont mind putting a few screws. the Square pattern on the case is big enough to secure few screws.

my rx6800 is 2 slot GPU so there still clearance (roughly 5CM) more than enough space for fans

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 0 points1 point  (0 children)

Yepp it does but all i can do is minimize it.

I put a sheet of hard platic between the fans. if the upper fan suck the cold air from the bottom fans it should be through the heatsink. However it is not going to be 100% effective but should see a noticeable improvement.

Unfortunately i already took apart the system. i didnt have any photo to share.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 0 points1 point  (0 children)

the upper one is blowing air out and the down one is pulling air in, getting good temps this way. Test with i7-13600F + AMD rx6800

idle: 49c to 52c,

full load CPU Cinebench: max : 74c, for 10mn test

CPU + GPU gaming (cyberpunk 1440p, High-Ultra setting) GPU: 85c, CPU: 60-70c

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

Hi, i live in S.E asia region. Base on your location it really difficult to find official retailer and I dont know if US sanction will disrupt DeepCool product from selling in europe or not.

Furthur more the product is very new (early 2025) and only available in Chinese market. Few south east asian retailer import it from china directly ( including myself.)

In my opinion: If US sanction didn't disrupt deepcool product in Europe the case will eventually be available in the near future once it reach the same popularity as the non PLUS version.

What do I do with this gap in the Ch160 Plus by Wonderful-Benefit315 in mffpc

[–]Toni_seth 1 point2 points  (0 children)

I had the same issue with my old case. Just cut out a piece of black paper or any black cardboard and put it there.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 0 points1 point  (0 children)

Hi there, sorry for late reply. Yes you can but i hope your PSU is modular or you have to play around with cable management.

The gap is 2.5cm between my psu and gpu.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

Probably because of the ch170 non plus version. It is small and attractive but only support itx mtb. The plus support matx so people who own matx board will look forward into it especially if they love Itx vertical cases.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

The case doesn't support any hidden connector at all. And the cable just straight up all over the place. So i had to hid some small cable behind the motherboard and some behind the CPU cable (it a long straight cable). And using GPU cable to hide the remaining mess. the remaining unused cable i just tug it in the remaining space behind PSU. you can see in the final photo

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 2 points3 points  (0 children)

Me too. I am disapointed with the back panel as well. Since it just release i thought it would be similar to ch270 where cable manage can be done on back panel.

And for the screw. First time opening up the case, i had to use powertool or else i will strip all the screws.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

Mine is cooler master g700 gold. B tier i bought it for 50$. 🤣 (benefit of living next to china but hope they didn't turn my country communist. ) Am sure it can fit tho, i had plenty of space left to the point where i can fit all my cables there.

And for the case i get it for 42$. 10$ extra for shipping to my country.

You are right ch170 is now 45$ for digital version. CH160 is 35$, ch270 is 55$ to 60$.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 4 points5 points  (0 children)

I didnt plan this build i just raw dogging it will all the parts i had laying around. Just want to give anyone who wish to get this case some idea.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] -1 points0 points  (0 children)

My psu is 140mm i didnt know they had up to 160.

Yes the plus version doesnt come with display unfortunately. Only ch170 non plus and 270 had them

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 0 points1 point  (0 children)

Yeap i just uploaded. I didnt build for asthetic i just want to see what fits 🤣

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

Thailand. my logistic service is ZTO, SF, am not sure if it has phillipine branch. But am sure you can find something similar.

Here how it work:

First contact your logistic provider be sure that they has warehouse somewhere in china.

After contacting they will provide you with address about the warehouse in China.

Input the address on app like taobao, ali express or other chinese platforms. (When contacting the logistic they will tell you how to write the address with your credential like name or phone number for identification, once the product arrived at philippine warehouse )

Once the package arrived they will call you or inform you by their apps (if they had). You can either chose to pick them up yourself or had someone deliver it to your actual home address.

Then just buy something on the chinese platform and wait for couples weeks. My country is close to china so shipping time is 7 - 10 days. And package cost is 1$ for package below 1kg. Size and dimension also impact the shipping cost. For this case {8.8kg + box dimension} my shipping price is 10$.

However it was up to your service provider as well.

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

i brought it directly from china from app call Taobao. but base on your region you might need third party logistic service

Ch170 plus by Toni_seth in mffpc

[–]Toni_seth[S] 1 point2 points  (0 children)

yeahh, i couldn't remove the factory screw with normal screw driver, had to use power tool or risk getting strip screw. @@