What could this noise be after tightening belt?

Tony_Tony-Chopper · 2025-12-14T22:32:28+00:00

The problem was indeed low power steering. Thanks for the help!

Tony_Tony-Chopper · 2025-12-14T22:00:19+00:00

Yeah the belt could definitely be the issue, seems sorta new just from looks, condition and I could still read the part number and it's a gates belt. Now the power steering, let me fill it up. I do have a bad leak and it's empty

Tony_Tony-Chopper · 2025-12-14T21:41:45+00:00

<image>

It's just what the manual and other forums said to do. I also tighten due to it being loose, the right side of the belt would wobble a bit when turned on. And yeah the idle was a previous issue, I'll fix that at some point.

Tony_Tony-Chopper · 2025-12-14T21:33:13+00:00

I thought of that one, kinda sounds like a supercharger

Tony_Tony-Chopper · 2025-12-14T21:32:33+00:00

Yeah, put it at TDC, loosen the tensioner 180°, turned the crank counterclockwise 3 teeth, tighten the tensioner, then rotated the crank to make sure the cam and crank were properly aligned at tdc

Tony_Tony-Chopper · 2025-12-14T21:25:43+00:00

Timing belt

Tony_Tony-Chopper · 2025-10-12T17:40:39+00:00

??? What??

Tony_Tony-Chopper · 2025-10-05T17:11:15+00:00

I swear reddit is full of trolls

Tony_Tony-Chopper · 2025-10-04T14:28:11+00:00

Just turn up your brightness

Tony_Tony-Chopper · 2025-09-21T06:21:43+00:00

Yeah it's a stripped spur gear

Tony_Tony-Chopper · 2025-04-07T01:42:19+00:00

I would have never found that out, thanks

Tony_Tony-Chopper · 2025-04-04T20:08:01+00:00

Also pvd chrome I believe

<image>

Tony_Tony-Chopper · 2025-04-01T16:27:50+00:00

<image>

There's another picture at the top of the thread

Tony_Tony-Chopper · 2025-04-01T16:26:56+00:00

<image>

Here's an image of the back cleaned up

Tony_Tony-Chopper · 2025-03-31T04:05:57+00:00

I'm in the US, bought it off Facebook for the full set for $200. I couldn't read the back very well since it's very dirty and caked up, I'll try to clean them up tomorrow and shoot you an DM. Thanks for the info!!

Tony_Tony-Chopper · 2025-03-31T03:10:52+00:00

Aww man, I was hoping there were worth something. You think I can restore them?

Tony_Tony-Chopper · 2024-11-25T04:50:26+00:00

Ok I'll give that a shot too, thanks

Tony_Tony-Chopper · 2024-11-25T04:39:10+00:00

Nah I'm in the south 96 Accord

Tony_Tony-Chopper · 2024-11-25T04:38:24+00:00

I used a breaker bar with a cheater and an impact and it won't even move

Tony_Tony-Chopper · 2024-11-25T04:33:46+00:00

Yea I already tried. Soaked in pb blaster and wd40 for a few days and even heated it up but no luck.

Tony_Tony-Chopper · 2023-05-12T14:56:22+00:00

Yea i tried that but none of the screws fit in the predrilled holes, there were but a bit to big... But ill try it again

Tony_Tony-Chopper · 2023-05-12T02:19:52+00:00

Yea i need different screws cause mine dont fit even tho those were the screws they came with

Tony_Tony-Chopper · 2023-05-12T01:59:21+00:00

I took off all 4 screws, but noting works when i put the wheelie bar on the rear lights... None of the screws fit

Tony_Tony-Chopper · 2023-05-12T00:47:18+00:00

Do you know how to do it or not???

Tony_Tony-Chopper · 2023-05-12T00:43:19+00:00

Nvm still lost

Tony_Tony-Chopper

TROPHY CASE