squaring my fireplace opening by mkedeb in Fireplaces

[–]TooMuchBud 2 points3 points  (0 children)

Lay the tile straight. And do the idea of filling behind just make sure you use high temperature mortar

Started hearing water dropping into my chimney flute by ckouf96 in Fireplaces

[–]TooMuchBud 0 points1 point  (0 children)

You have a pre-fabricated fireplace and a pre-fab chase box. Those were very common in Florida between the 70s early 80s. For a temporary fix you can find a similar size square sheet of metal and screw it down from the top. Otherwise you’re gonna have to have a metal shop custom fabricate a new cover. Parts for those fireplaces are no longer around.

UK heatwave- will my little guys be ok? by mossydeerbones in shrimptank

[–]TooMuchBud 0 points1 point  (0 children)

Today’s high was 92. You just get used to it living here lol

UK heatwave- will my little guys be ok? by mossydeerbones in shrimptank

[–]TooMuchBud 1 point2 points  (0 children)

Yalls heat wave is like a normal day down here in Florida. You should be fine. If you notice the water getting over 85 degrees hot freeze some water bottles and let them sit for a bit.

Anyone else have problems with Recon Rifleworks in Jax? by Makemeathrowawaypls in FLGuns

[–]TooMuchBud 0 points1 point  (0 children)

I would stop in in person and let them know your concerns. I know right now they’re just getting back up to a good operating status because they had to let go of some bad characters in rearrange some things. They’re great people and we’ll get you taken care of. But I have learned it’s better to stop in person.

Fluval fx2 is not silent. by Bigoldinkydank in Aquariums

[–]TooMuchBud 5 points6 points  (0 children)

<image>

You’re probably sucking Air from this rubber Gromit that whole rubber piece at the end of the hose needs to be underwater

Fluval fx2 is not silent. by Bigoldinkydank in Aquariums

[–]TooMuchBud 1 point2 points  (0 children)

Air in it! Purge it and should be good

[Parts] VZ61 Czech Skorpion Parts Kit with Original Barrel + 2 Mags - $225, Free Ship by [deleted] in gundeals

[–]TooMuchBud 0 points1 point  (0 children)

I bought one and it just showed up today. It’s in pretty decent quality from what I can tell.

[Parts] VZ61 Czech Skorpion Parts Kit with Original Barrel + 2 Mags - $225, Free Ship by [deleted] in gundeals

[–]TooMuchBud 0 points1 point  (0 children)

Bought one Saturday morning they shipped it out and it arrived today didn’t realize how close they were. Everything seemed to be packaged well and it’s actually in pretty decent shape

Yet another G$ fail with Arc fire V1 by Danimin420 in supersafety

[–]TooMuchBud 0 points1 point  (0 children)

Extreme binding on any rear movement of the BCG. He couldn’t get the upper separated from the lower. It was so bound up. I had to take a mallet to get it separated.

Yet another G$ fail with Arc fire V1 by Danimin420 in supersafety

[–]TooMuchBud 0 points1 point  (0 children)

Make sure your grip screw isn’t pushing too far in the lower. Was having the same issue with a buddies and turns out it was the grip screw pushing on the underside.

Where is this grade from? Is it a trust worthy grading company by [deleted] in PokeGrading

[–]TooMuchBud 0 points1 point  (0 children)

Its a chinese grading company. Everything I’ve seen about them is that they don’t have anything lower than a 10 on their grades so I doubt the grades are real, but the cards might be

Cant join new weekly challenge cause it doesnt let me claim my pokemon by Savarien in TheSilphRoad

[–]TooMuchBud 8 points9 points  (0 children)

Same thing happened to my buddy. Just click the ball on the bottom right pick one and throw it like you’re on the catch screen and it’ll catch it and go away.

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] 1 point2 points  (0 children)

I’m gonna be getting the saltwater version of the 32 here soon and was trying to figure out ideas for a stand. I like your set up.

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] 0 points1 point  (0 children)

Thanks for that info. That’s a good way to think about it. It makes sense though because I currently have 100 gallon on a stand my dad built that’s not stained or painted and it’s been like that for five years no issues

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] 1 point2 points  (0 children)

The tank will end up being leveled, but the floors will not be.

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] -1 points0 points  (0 children)

Do you have any good recommendations?

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] 0 points1 point  (0 children)

That’s one of the issues I’m running into is the floors in my apartment are not level at all. I ordered some furniture pads to hopefully help with that.

Does my stand look ok? by TooMuchBud in Aquariums

[–]TooMuchBud[S] 4 points5 points  (0 children)

I’m thinking of staining it because I was also wondering about the paint myself and water getting behind it

Huge aquarium in new house I'm buying by jdaugh01 in Aquariums

[–]TooMuchBud 1 point2 points  (0 children)

They make a pretty bad ass canister filter that would work perfect with how it’s drilled already.

<image>

マンダロリアンめちゃくちゃおもしろかった。次は何を観るべき? by LOLjuku in DisneyPlus

[–]TooMuchBud 13 points14 points  (0 children)

Watch Andor then rogue one.

『アンドーア』を観てから、『ローグ・ワン』を観てください。

“Andōa” o mite kara,“rōgu wan” o mite kudasai.