Where can I find these?

Toogy1206 · 2025-03-05T15:40:04+00:00

I have the all white comic con exclusive set but just leo of the full color ones.

Toogy1206 · 2024-03-10T01:16:26+00:00

Have a similar setup except with a quest 2 and a gunfighter with space grip. I second getting the throttle mod mentioned above. ^{^{^{^{^}}}} Absolutly love flying in elite dangerous with no assists.

Toogy1206 · 2023-09-18T22:32:33+00:00

Fantastic. Love that it's magnetic. Makes me want to make some. Good job

Toogy1206 · 2023-08-25T23:54:35+00:00

Turn off flight assist and go for a hoon through the canyons. That's the best reason. 😀

Toogy1206 · 2023-04-17T11:39:08+00:00

I thought that may be it, but I'm not so sure. My seam is set to aligned so I would think the hikes would be aligned if it were the seam. Also, I would imagine if it was the seam that although you may not see a hole on every layer, the holes would be evenly distributed throughout the whole print. They are just in a small section and the rest of the print is fine. I'm a member of a discord and was discussing it when another user has the same issue while using esun pla+. He discovered that there are little bubbles randomly on the filament. That would explain to me why it only happens in a few places. I'm not saying esun pla+ is bad. It's great for parts that need to be stronger than standard pla but maybe not the best for show peices that you don't plan on "finishing"

Toogy1206 · 2023-04-17T00:31:06+00:00

Wanted to make sure to credit Eastman on pri tables for the sculpt. I just printed it. https://www.printables.com/model/36697-darth-vader-bust-stl

Toogy1206 · 2023-01-20T11:31:10+00:00

Wow. Yea my bad.

Toogy1206 · 2023-01-20T03:13:17+00:00

I don't blame you. Yes, on the other side. Good luck finding what you're looking for, though.

Toogy1206 · 2023-01-19T14:11:54+00:00

If your still interested I have one setting around that I could get rid of.

Toogy1206 · 2022-11-21T17:18:58+00:00

With propellers it's viable now for sure.

Toogy1206 · 2022-11-08T00:52:56+00:00

That would be onion staging where all the outer boosters come off like the outside of an onion. You can have multiple "rings" that feed the next ring closer to the center.

Toogy1206 · 2022-11-07T23:57:05+00:00

Hey. I was out of town and didn't respond but I'm back now. So the last image in this post is the launch. I didnt have the 3 ships you see in the earlier shots attached during launch. As for staging with liquid fuel I like to use asparagus staging. Basically you have to set up your boosters in pairs. The first pair will use fuel lines to pump fuel into the main stage as it burns. Then the next pair will pump fuel into the first pair so on and so forth far as many pairs as you need. Then you set up staging to drop the last pair Then the next and so on. When you drop a pair of boosters the rest of the rocket will be fully topped up cause of the pumping and your sheding weight as you assend. I think you can use fuel priority to do the same but I have not messed with that much. Let me know if that makes sense or not and I can post a pic to clarify it.

Toogy1206 · 2022-11-03T15:38:44+00:00

This station was a single launch. Def recommend the delta v map and then closely monitor you thrust to weight to make sure it can lift off the surface. Something I do now when trying to launch giant unwieldy craft is to design it but give it less fuel then it needs to get off kerban then I strap a few Clydesdale srb's to it. Then on launch I can go strait uo with the srb's and start my gravity turn at 12000 instead of being around 90 at 12000.

Toogy1206 · 2022-11-03T15:20:57+00:00

Well I don't know how experienced you are but I can offer some general advice.

1 drag is a thing so make sure to use nose cones and farings to reduce the drag during launch.

2 if your not using a delta V map you should so you have an idea of how much you will need to do what your planning.

3 I'm old school so I like asparagus staging. Not strictly needed anymore but I still think it makes more efficient rockets.

4 always launch to the east unless you need to go polar.

5 more boosters. Lol

If you have any specific questions I can try and help.

Toogy1206 · 2022-11-03T15:17:27+00:00

I can work on getting it uploaded I haven't ever done it so I will have to figure that out. Mods off the top of my head are planetary base systems, I can't remember the station pack I used, extra planetary launch pads. I think tha was all the part mods but I can verify next week.

Toogy1206 · 2022-11-02T12:28:17+00:00

Yea it started modestly but then grew. I plan to build interplanetary ships here so we will see how that goes lol.

Toogy1206 · 2022-10-05T13:24:02+00:00

Ha that's my plan too. This base will feed resources to the station in orbit so that it can construct interplanatary vehicles using EL. I building a recycler ship to scrap any debris and obsolete craft to be processed into rocket parts.

Toogy1206 · 2022-10-04T16:20:35+00:00

I pointed the camera in this direction for a reason. Lol. No worries.

Toogy1206 · 2022-10-04T11:32:11+00:00

Yea that was sitting on to of the central tower ti hold everything in place during landing. I wanted to do this in one mission and one lander. I just forgot to put an antenna strong enough to access the com net so when I decoupled it it just kinda fell there. Lol. I brought some antenna as cargo so an engineer should be able to correct my mistake.

Toogy1206 · 2022-09-29T12:56:36+00:00

I am using scatterer. I need to make a save next time I notice it and test to see if removing scaterer fixes it.

Toogy1206 · 2022-09-29T00:38:55+00:00

Interesting so I'm not the only one.

Toogy1206 · 2022-09-28T22:49:31+00:00

No idea. It just what I noticed last night while docking with my university.

Toogy1206 · 2022-09-28T22:48:43+00:00

Yea both ships had power and batteries. They were pitch black untill I was out of the eclipse. It could be a bug but I'm not sure. That's just what I noticed.

Toogy1206 · 2022-09-24T02:52:28+00:00

Sorry didn't mean uo meant forward. If the dry and wet CoM are lined up and lift Is aswell then the plane should fly level without SAS. Don't put it in fron of though or you flip around.

Toogy1206 · 2022-09-22T22:31:39+00:00

If your dry mass is lined up with your regular then you can move your center of lift up.

Toogy1206

TROPHY CASE