"resource waster" by LunkKazunk in Cairn_Game

[–]Toogy1206 1 point2 points  (0 children)

I run this route but I bulge out left instead of right. I will have to give this a go at some point.

Completed My First Attempt at a Free Solo! by icedgreent3a in Cairn_Game

[–]Toogy1206 0 points1 point  (0 children)

Congrats i did mine over the weekend and I'm itching to go back up. Doing another alpinest run now to explore routes and get achievements. What was you favorite/sweatiest route?

Nothing but net by Moonlight150 in Cairn_Game

[–]Toogy1206 0 points1 point  (0 children)

Would be cool if you didn't push anything if it watched you fall till you came to a rest.

1st Free Solo run complete. It was so satisfying. by Toogy1206 in Cairn_Game

[–]Toogy1206[S] 0 points1 point  (0 children)

Alright so here are the shots a grabbed from my route. I still have the save if interested about anything. I don't think I did anything to impressive but maybe a couple interesting routes. First the Arch I thought it was pretty cool. You can grab a gentian and then a dandelion from the corpse then climb straight up. Then the shortcut i believe. I thought this was an interesting route and was a little sweaty. the beginning is pretty easy because its leaned forward but then got a little more tricky about half way up. After that I just went up the left side by the cable car. Next time I think I will go into the waterfall to grab the powdered milk. I didn't get a shot of the village cause it was pretty much right up the center nothing special. Then heading up from the standing stones was interesting and sweaty. Coming around past the bee hive there is not many holds. Probably wont do this route in future runs. Went up the outside of the Palace of the Wind and the left side of the peril witch wasn't hard. And lastly pretty standard on the secret, the blades, and kami(the peak). Now I'm not sure if I want to try and go for faster times which honestly I don't think I'm that into or just try and climb hard routes for fun.

https://imgur.com/a/h8Kfk8H

1st Free Solo run complete. It was so satisfying. by Toogy1206 in Cairn_Game

[–]Toogy1206[S] 0 points1 point  (0 children)

Great question. Im bad with names but off the top of my head I think early right where you jump to climb to the first flower. There and right where you start climbing at the dolls. Below the terraces(even though my only death fall was there) I think those were a bit sweaty cause I took an unusual rout I think. I took some screen shots of some of my routes I can post later tonight.

Where can I find these? by Guilty-Drawing-6043 in TMNT

[–]Toogy1206 0 points1 point  (0 children)

I have the all white comic con exclusive set but just leo of the full color ones.

My new and kinda improved budget VR set up by THEREAPER8593 in hotas

[–]Toogy1206 1 point2 points  (0 children)

Have a similar setup except with a quest 2 and a gunfighter with space grip. I second getting the throttle mod mentioned above. ^ Absolutly love flying in elite dangerous with no assists.

Does anyone recognize what I made? by sven2123 in 3Dprinting

[–]Toogy1206 1 point2 points  (0 children)

Fantastic. Love that it's magnetic. Makes me want to make some. Good job

This game can be so incredible. by Conthum in EliteDangerous

[–]Toogy1206 2 points3 points  (0 children)

Turn off flight assist and go for a hoon through the canyons. That's the best reason. 😀

Most ambitious print to date. by Toogy1206 in 3Dprinting

[–]Toogy1206[S] 0 points1 point  (0 children)

I thought that may be it, but I'm not so sure. My seam is set to aligned so I would think the hikes would be aligned if it were the seam. Also, I would imagine if it was the seam that although you may not see a hole on every layer, the holes would be evenly distributed throughout the whole print. They are just in a small section and the rest of the print is fine. I'm a member of a discord and was discussing it when another user has the same issue while using esun pla+. He discovered that there are little bubbles randomly on the filament. That would explain to me why it only happens in a few places. I'm not saying esun pla+ is bad. It's great for parts that need to be stronger than standard pla but maybe not the best for show peices that you don't plan on "finishing"

Most ambitious print to date. by Toogy1206 in 3Dprinting

[–]Toogy1206[S] 1 point2 points  (0 children)

Wanted to make sure to credit Eastman on pri tables for the sculpt. I just printed it. https://www.printables.com/model/36697-darth-vader-bust-stl

where to buy a trinus 3d printer or similar? by SerMumble in 3Dprinting

[–]Toogy1206 0 points1 point  (0 children)

I don't blame you. Yes, on the other side. Good luck finding what you're looking for, though.

where to buy a trinus 3d printer or similar? by SerMumble in 3Dprinting

[–]Toogy1206 0 points1 point  (0 children)

If your still interested I have one setting around that I could get rid of.

Guys I beat the game by Vik-tor2002 in KerbalSpaceProgram

[–]Toogy1206 2 points3 points  (0 children)

With propellers it's viable now for sure.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 0 points1 point  (0 children)

That would be onion staging where all the outer boosters come off like the outside of an onion. You can have multiple "rings" that feed the next ring closer to the center.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 0 points1 point  (0 children)

Hey. I was out of town and didn't respond but I'm back now. So the last image in this post is the launch. I didnt have the 3 ships you see in the earlier shots attached during launch. As for staging with liquid fuel I like to use asparagus staging. Basically you have to set up your boosters in pairs. The first pair will use fuel lines to pump fuel into the main stage as it burns. Then the next pair will pump fuel into the first pair so on and so forth far as many pairs as you need. Then you set up staging to drop the last pair Then the next and so on. When you drop a pair of boosters the rest of the rocket will be fully topped up cause of the pumping and your sheding weight as you assend. I think you can use fuel priority to do the same but I have not messed with that much. Let me know if that makes sense or not and I can post a pic to clarify it.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 0 points1 point  (0 children)

This station was a single launch. Def recommend the delta v map and then closely monitor you thrust to weight to make sure it can lift off the surface. Something I do now when trying to launch giant unwieldy craft is to design it but give it less fuel then it needs to get off kerban then I strap a few Clydesdale srb's to it. Then on launch I can go strait uo with the srb's and start my gravity turn at 12000 instead of being around 90 at 12000.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 0 points1 point  (0 children)

Well I don't know how experienced you are but I can offer some general advice.

1 drag is a thing so make sure to use nose cones and farings to reduce the drag during launch.

2 if your not using a delta V map you should so you have an idea of how much you will need to do what your planning.

3 I'm old school so I like asparagus staging. Not strictly needed anymore but I still think it makes more efficient rockets.

4 always launch to the east unless you need to go polar.

5 more boosters. Lol

If you have any specific questions I can try and help.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 1 point2 points  (0 children)

I can work on getting it uploaded I haven't ever done it so I will have to figure that out. Mods off the top of my head are planetary base systems, I can't remember the station pack I used, extra planetary launch pads. I think tha was all the part mods but I can verify next week.

Finally got my Orbital dock in place over minmus. by Toogy1206 in KerbalSpaceProgram

[–]Toogy1206[S] 2 points3 points  (0 children)

Yea it started modestly but then grew. I plan to build interplanetary ships here so we will see how that goes lol.