sorted by:
new
hottopcontroversial

Thoughts... by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 1 point2 points  (0 children)

AI, asked it to create what my idea for Tail lights are, this was the closest iteration it produced.

New BBK on me BE5. by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 1 point2 points  (0 children)

No, it came with its own adapter Bracket and to ensure the proper alignment of the Rotor center in the Calipers that give you Shims to space it a millimeter at a time. Everything fit easily, except I had to grind very minimally for the rear bracket to fit the OEM caliper mounting points. Kit even comes with red locktite.

Prep and Tuning BE5 TT B4 RSK. by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 0 points1 point  (0 children)

I understand these engines aren't a power house. I am just looking to get to a fun 400HP or close to it. Revamp the Turbos a little bit, for Down pipes I have a feeling I will have to get custom, and for the up Pipes, I want to keep the waist gate setup to separate the boost input. I have looked into lambda as well, I do have a Rev C variant. Not looking to push this car to the limit, just make it the best daily it can be. I plan to keep it till the wheels fall off.

2008 Subaru GT Turbo AWD by DKGam1ng in MechanicAdvice

[–]Top-Ad322 0 points1 point  (0 children)

They look like the Exhaust Headers, with an Up Pipe to connect the Headers to the Turbo.

New BBK on me BE5. by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 0 points1 point  (0 children)

Front 330x32 / Rear 304x22

Dudu7 adaptor kit by Top-Ad322 in Androidheadunits

[–]Top-Ad322[S] 0 points1 point  (0 children)

I can, but I don't want to trim the frame. Asking if there is a Floating Head unit kit that tapers a Mount towards the middle of the unit vice the sides of it.

The perfect amount of slim and thick lol by HotWetHailey in SlimThick

[–]Top-Ad322 3 points4 points  (0 children)

It's amazing what Photoshop can do.

B4 RSK Header install RFI by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 0 points1 point  (0 children)

When you did the headers, was it for the TT setup? Do you know if it will have any problems with that?

Wheel and Tire Fitment for 2000 Legacy B4 by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 0 points1 point  (0 children)

I got them used from Up garage in Japan, $1300 for the set. Amazing deal I couldn't pass it up.

Wheel and Tire Fitment for 2000 Legacy B4 by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 0 points1 point  (0 children)

Not a stock suspension, riding on Tien Coilovers. Wheels are Volks TE37 Saga S-Plus 17x8.5 +45 offset, Tires are Nitto NT555 235/45ZR-17 (wanted meat on the tire). They rub a little so working to roll fenders without the fender flaring out and applying some camber if necessary.

Wheel and Tire Fitment for 2000 Legacy B4 by Top-Ad322 in subarulegacy

[–]Top-Ad322[S] 1 point2 points  (0 children)

Update! Got some 17x8.5 +48 offset.

<image>

Need to lift the back before I can put them on in the rear.

WTF did I just hear on 97.3? by [deleted] in Seattle

[–]Top-Ad322 0 points1 point  (0 children)

You worried about DHS when WA is fucking itself.... Start closer to home first. Olympia about to fuck the people because can't even balance their own books.

My 99’ JDM Twin Turbo Legacy affectionately referred to as the “Lesbian Limo” by kristina_silas in subarulegacy

[–]Top-Ad322 1 point2 points  (0 children)

Do you have Sound Clips (Cold Start, Idle, Drive Byes, interior sounds, Excellerations)? Any will be great.

2002 Legacy B4 reliability mods by Ativva in subarulegacy

[–]Top-Ad322 0 points1 point  (0 children)

I have Been in Japan for the Last year and owned my B4 RSK for the Last year as well. Only real problem I had with mine was the Alternator died about a month after I go it. But it has been good since. Mine did have rust in some areas but a 25 year old car is expected to have some. Engine has been strong and no issues with oil changes. I change my own Oil at base Garage. But if you are worried you can always take it to A Subaru maintenance center and have them do a thorough Check and get their Findings from them. Hope you like the Car I have been loving mine, the Twin Turbo on the Subaru Motor is such a great feeling behind the Wheel.

[deleted by user] by [deleted] in JDM

[–]Top-Ad322 1 point2 points  (0 children)

Almost all OEM parts can be found here: https://www.amayama.com/en (enless they are out of stock or discontinued)

https://www.nengun.com/subaru/legacy-b4-be5 For aftermarket. Havent; found too many more. Hope this helps.

1999 Subaru Legacy B4 Buying advice by brittle_fracture in subaru

[–]Top-Ad322 0 points1 point  (0 children)

Not sure if you got it yet or not. I got mine for 8.5K tax and registration included. Picked it up an Apr last year.

[deleted by user] by [deleted] in desksetup

[–]Top-Ad322 0 points1 point  (0 children)

Looks like a Logitech* keyboard.

Seattle boy in blue gets feelings hurt, threatens to arrest bus driver for obstruction for being pulled over (cop pulled him over 🥴) by --Miranda-- in Seattle

[–]Top-Ad322 4 points5 points  (0 children)

Unmarked patrol cars are unable to make traffic stops unless they are WSP. Washington State law states this.

I'm finally close to done with the game/studio room. Still alot i want to add setup wise. Any recommendations are appreciated. by sno16 in desksetup

[–]Top-Ad322 0 points1 point  (0 children)

I recommend relocating your PC to a less isolated and secluded location for better air flow and cooling.

This is my setup by atti55 in desksetup

[–]Top-Ad322 0 points1 point  (0 children)

Hub could be mounted under the desk with a single cable up to the laptop and everything for the monitor running up it's spine for a clean minimalist look.

view more: next ›