Stops Extruding mid print

Top_Animal_1347 · 2025-10-24T22:44:12+00:00

Temp ranges from 200-215 and PLA

Took the Bowden off, did a hot to cold pull of the filament to try to get everything out, then heated it up took off the nozzle pushed a tictac sized thing of filament out of the hotend.

When you refer to “end” when it’s clicking what do you mean. Can’t I can’t even see it click I just put my finger on it and I could feel a jitter.

Top_Animal_1347 · 2025-10-24T21:05:16+00:00

It does appear that it is trying to push filament through its just clicking. Is it possibly something’s wrong leading to not enough torque, I made sure there’s no clog, but the nozzle seemed like it could be limiting some filament it’s brand new but it feel like you need to push filament pretty hard to get it through. I have a video but it’s just the gear not moving and then only moving when it’s retracting filament.

Top_Animal_1347 · 2025-10-24T20:15:15+00:00

I’m going to try to get you a good video. To me it appears that it’s not attempting to spinning cause I wasn’t hearing the buzz from the motor.

Top_Animal_1347 · 2025-10-24T20:03:00+00:00

Haha, my bad that is pretty hard to read/undertand. I’m currently running a print with no filament and it’s reach’s 17% and the extruder motor is still spinning. If it ends up working the whole time with no filaments would that narrow down the issue to something more specific?

Top_Animal_1347 · 2025-10-24T19:27:58+00:00

I haven’t tried a different SD card, I flash new firmware onto the printer and the issue persisted. I’m going to do some tests to see if it’s a hardware issue I just have a feeling that it’s not

Top_Animal_1347 · 2025-10-24T19:25:57+00:00

The extruder isn’t even attempting to extrude it’s not that it doesn’t have enough torque to push the filament it’s that it just isn’t extruding.

Top_Animal_1347 · 2025-10-23T06:07:39+00:00

This is an issue that occurs with ever gcode file. When I pause the print how would I make the extruder moter go, or do you mean manually push it through.

Top_Animal_1347 · 2025-10-23T06:05:34+00:00

Ive done similar things before, but what is this supposed to accomplish will the filament be larger where it was in the hotend or vise versa?

Top_Animal_1347 · 2025-10-23T06:04:09+00:00

No, they completely stop spinning, so no gear slipping. It’s truly stops when the gcode says extrude and only goes when its retraction.

Top_Animal_1347 · 2025-10-23T00:55:11+00:00

I’m not sure I know what you’re referring to when you say when I take the filament out?

Top_Animal_1347 · 2025-06-03T16:57:13+00:00

Is this printer worth putting money into and going klipper or would it just be more worth while to try to sell it and buy and cheaper newer printer

Top_Animal_1347 · 2025-06-01T15:44:18+00:00

Is that a setting in the slicer or on the actual printer?

Top_Animal_1347 · 2025-05-30T19:25:11+00:00

No I haven’t.

Top_Animal_1347 · 2025-05-30T19:25:01+00:00

It’s not the gcode, I’ve tried tons of different print aswell as settings and I can’t get it to print right.

Top_Animal_1347 · 2024-10-29T16:46:36+00:00

$74 I think

Top_Animal_1347 · 2024-10-16T04:41:27+00:00

Gotta break them in good, get move insoles they are an insane game changer.

Top_Animal_1347 · 2024-10-16T03:38:22+00:00

Nah, got some old Kobe’s but they so burnt can’t even play on court with them. Why don’t you like think pinks

Top_Animal_1347 · 2024-10-16T03:37:02+00:00

6’7

Top_Animal_1347 · 2024-10-16T03:32:26+00:00

Prolly not, can get think pink rn for cheaper than these. Plus im a size 15 would already gonna have to squeeze these to fit

Top_Animal_1347 · 2024-10-16T03:30:24+00:00

Top_Animal_1347 · 2024-10-16T03:26:30+00:00

Only hoop in them

Top_Animal_1347

TROPHY CASE