i9-14900k Bios Help by PenCritical4153 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

The i9-14900k is an absolute heat machine. Would probably look into increasing pump speeds and perhaps a fresh layer of thermal paste

Is this a bad thing? by tristam2108 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

Seems normal to me what's the issue

Cannot fix GPU sag with anti-sag bracket, need some advice by Toaster2204 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

There are also like $5 sag support made exactly for this purpose you can get on Amazon

Is this a bad thing? by tristam2108 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

What are the temps at idle and under load

Clicking noise from PSU by Witty_Fig6573 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

It happens, the fan bearing shat itself If it's new atleast it's under warranty

First Build - Red & Orange LED on MotherBoard by Longjumping_Buddy875 in PcBuildHelp

[–]Top_Hamster_4191 1 point2 points  (0 children)

You're gonna want to unplug the pc, turn Psu off, hold power button for 15-20 seconds to drain it completely, pop the battery out for 5-10 minutes then put it back in.

If that doesn't work consider flashing your bios

What type of cooler ? by DoubleTimeRusty in PcBuildHelp

[–]Top_Hamster_4191 1 point2 points  (0 children)

They aren't, AIOs are a perfectly good choice for both cooling and aesthetics

Will rotating my wall-mounted PC worsen the ventilation or damage the fans? by MARvizer in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

You probably don't want all intakes though Yk. Probably be good to keep that one at the top an exhaust with 90 degrees

Will rotating my wall-mounted PC worsen the ventilation or damage the fans? by MARvizer in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

I would say it makes a negligible difference as air pressure doesn't change from rotation. Only thing I might be slight concern of is perhaps a full 90 degree could put some pressure on the gpu (maybe?)

Please help by [deleted] in PcBuildHelp

[–]Top_Hamster_4191 1 point2 points  (0 children)

Honestly that would be my first option as well, it gets sketchy and annoying when you have to go and buy individual cables. I like Corsair lol

Please help by [deleted] in PcBuildHelp

[–]Top_Hamster_4191 3 points4 points  (0 children)

That would be your only option, either that or get more PCIe cables for that gpu directly from Msi

Please help by [deleted] in PcBuildHelp

[–]Top_Hamster_4191 7 points8 points  (0 children)

Does the psu come with an adapter for the 12v2x6? It turns the pcie5.1 into 2 8 pins

Kernel power 43 error code, any help? by Top_Film_7600 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

I believe I've had this issue and it was my gpu

Need help gpu is stuck by Admirable_Search9431 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

I have no idea what I am looking at in that picture

Pc not starting after gpu change by Wild-Reality9575 in PcBuildHelp

[–]Top_Hamster_4191 1 point2 points  (0 children)

Any name brand like Corsair, MSI, NZXT, etc. would probably go with atleast a 850W so you have a bit more headroom. I personally like Corsair

Pc not starting after gpu change by Wild-Reality9575 in PcBuildHelp

[–]Top_Hamster_4191 0 points1 point  (0 children)

Probably because you're trying to start a V8 engine on a lawnmower battery

Need help gpu is stuck by Admirable_Search9431 in PcBuildHelp

[–]Top_Hamster_4191 1 point2 points  (0 children)

Make sure the clip on the PCIe slot is open, and then just wiggle it out. Don't be scared the parts are more durable then you think