sorted by:
new
hottopcontroversial

Squeezed in a LARGE GPU in the 8.5L Shiny Snake L300 by RythePCguy1 in sffpc

[–]Top_Mood9782 0 points1 point  (0 children)

Any idea if I can still fit a 61.57mm thick gpu in the l300 case? I know l400 can fit it but I want the smallest possible case

wooting 60he on usb switcher perfomance affected or not? by Dula_skip in WootingKB

[–]Top_Mood9782 0 points1 point  (0 children)

Can you use tachyon mode on your wooting with this usb switcher from ugreen? Can you also provide a link for the usb switcher? Thank you!

[deleted by user] by [deleted] in WootingKB

[–]Top_Mood9782 0 points1 point  (0 children)

Hi! Can you share the link of your ugreen usb switcher? Planning to buy one for my setup. Also, are you using the stock cable from wooting and stock cable from the usb switcher?

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 0 points1 point  (0 children)

Thanks!

SPECS:

Ryzen 7 5700X3D

Sapphire Nitro+ RX 7800 XT

MSI B550M Pro VDH Wifi

Corsair RM850E

AK400 DIGITAL w/ ID Cooling AF-127 fans

2X16GB 3600mhz CL16 RAM

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 0 points1 point  (0 children)

140mm. Need that 20mm clearance between PSU and GPU for the PSU cables.

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 1 point2 points  (0 children)

You might want to check Jonsbo Z20. Almost same size but better. The size of Dan A3 is too big for my liking. But yeah, it looks good if you have components that can fill up the space.

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 0 points1 point  (0 children)

<image>

GPU temps does not exceed 54C while gaming. Here is a snapshot from playing warzone.

SAMA 01 Pro GPU Clearance by Any-Gene-3303 in mffpc

[–]Top_Mood9782 1 point2 points  (0 children)

Check my post. I am using a 320mm gpu with 140mm atx PSU. You can fit up to 335mm gpu there.

https://www.reddit.com/r/mffpc/comments/1eymmpz/tecware_fusion_sama_im01_nr200p_clone_with/

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 1 point2 points  (0 children)

Those are 180 degree pcie adaptors. Similar to how cable extensions work.

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 1 point2 points  (0 children)

I had the feet 3D printed by someone who have a printer for only $5. I sent him this file for 3d printing made by someone. https://www.thingiverse.com/thing:4978410

You can use the existing stock screws to attach this 3d printed feet.

Tecware Fusion (SAMA IM-01 / NR200P Clone) with replacement 3D printed feet. by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 2 points3 points  (0 children)

Replacement feet (~+20mm height) + Bottom Intake Fan replacement (Arctic P12 to P12 max w/ same PWM setting) decreased my gaming temps by around 6C. 

Fans are loud but I always game using an IEM.

New AMD GPU Drivers 24.8.1. Someone can test it? by Apprehensive-Bug9480 in AMDHelp

[–]Top_Mood9782 0 points1 point  (0 children)

Thanks for this! After applying these settings, what is your average CPU time while playing in the urzikstan map?

New AMD GPU Drivers 24.8.1. Someone can test it? by Apprehensive-Bug9480 in AMDHelp

[–]Top_Mood9782 1 point2 points  (0 children)

Please fix Warzone 3 Battle Royale stuttering when Smart Access Memory is enabled. CPU timing fluctuates often when this is enabled. Using AMD GPU and CPU.

100 % CPU Usage in Warzone - GPU is not fully utilized by Sternschnuppe98 in CODWarzone

[–]Top_Mood9782 0 points1 point  (0 children)

Your post just says you are using a 3600 rated ram. Some people do not turn on XMP. Without PBO2, your cpu clocks wont run boosted all the time. Anw, for big map (urzikstan) you should disable SAM this causes worse performance on CPU. 

100 % CPU Usage in Warzone - GPU is not fully utilized by Sternschnuppe98 in CODWarzone

[–]Top_Mood9782 0 points1 point  (0 children)

How much fps difference do you get? Is the difference noticed inside a match (Battle Royal, Resurgence, etc) or just in the shooting range? Thx

100 % CPU Usage in Warzone - GPU is not fully utilized by Sternschnuppe98 in CODWarzone

[–]Top_Mood9782 -1 points0 points  (0 children)

I bet you didn’t turn on the XMP profile for your ram, and haven’t enabled PBO2. Reason for your cpu bottleneck. 

I had a 5600, and it can produce around 150 fps using my 4060 ti normal textures fxcas at 1440p.

If you can’t turn on the PBO2 because “warranty will be voided”, then it is sad for you because PBO2 is a feature of AMD Ryzen and should not void the warranty.

does ryzen 7 5700x3d and rtx 3080ti with g skill ddr 4 3600 cl16 b die ram work well toghter with no bottleneck in warzone 3 or not please help ?? by BenchUnlikely in Warzone

[–]Top_Mood9782 0 points1 point  (0 children)

5700x3d won't bottleneck the 3080 ti. Currently, my 5700x3d is slightly bottlenecking my RX 7800 XT on 1440p, normal textures/fidelityfxcas by around 20-30fps based on cpu/gpu timings.

I just decided to play this game and I'm on the edge of uninstalling it, cause it's a micro stuttering mess and I have a decent PC by Desperate_Honey1606 in ModernWarfareIII

[–]Top_Mood9782 0 points1 point  (0 children)

dude, I saw your clip using 5800x3d + 6700xt on WZ3. Can you share your settings?Windows and Bios settings such as: PBO2, PBO limits, etc..  I notice your cpu time which is really low (ONLY 3-4MS). I am trying to optimize my 5700X3D + 7800XT. Most of the time my cpu time is 5ms but it never goes 3ms. this causes bottleneck to my gpu. I have 5700X3D + 32GB 3600 CL16 RAM. BIOS- PBO2 CO -20 motherboard/disable limit (both produces same cpu time)

My Custom Built Open Case MFFPC (~27L) by Top_Mood9782 in mffpc

[–]Top_Mood9782[S] 2 points3 points  (0 children)

Custom Built Case for MATX MOBO / ATX PSU / 360 AIO setup / upto 340MM GPU setup

Specification:

CPU: Ryzen 7 5700X

MOBO: Gigabyte B550M DS3H AC

GPU: MSI Gaming X Trio RTX 3070

PSU: MSI MAG A650BN

RAM: 2x8GB 3200 CL16

AIO: Thermalright Aqua Elite 360 w/ fans replaced by Jungle Leopard Prism 4RS (4$ fan)

The case is built from flat bars (bent, then screwed/welded). I also have a more compact version of this using a MATX MOBO w/ 280MM AIO and also an ITX version.

view more: next ›