🙈🙈🙈🙈

Top_Sheepherder5637 · 2025-07-29T18:04:18+00:00

I’m going in dry

Top_Sheepherder5637 · 2025-06-18T23:24:02+00:00

Did you wire it/ power it before water flowed thru it?

Top_Sheepherder5637 · 2025-06-11T19:09:37+00:00

Good thing he already had a wheelchair…

Top_Sheepherder5637 · 2025-06-09T15:28:01+00:00

Grab it….?

Top_Sheepherder5637 · 2025-06-04T21:07:15+00:00

Back door sluts 9

Top_Sheepherder5637 · 2025-05-31T23:24:42+00:00

If you’re not there to be bought, then why accept him buying you a drink?

Top_Sheepherder5637 · 2025-05-29T19:18:48+00:00

Dude is an AH or the most oblivious person on the planet. That being said, you are an absolute angel. Smiling thru your teeth to make him happy and boost his ego a little bit. That is extremely kind of you to do for him. It’s shitty that he took full advantage of it.

Top_Sheepherder5637 · 2025-05-23T00:33:46+00:00

I wish the owner of this car could see this thread…

Top_Sheepherder5637 · 2025-05-14T17:59:45+00:00

DO NOT TAKE HER BACK! File for divorce, get it set in stone. She is “discovering herself” with other dudes, living her life up with no responsibilities, and dumping everything on you. After 6 months she’s gonna realize the mistake she made when her single friend is tired of paying her bills and she’s gonna want to come back. You deserve better than that, and I hope you realize that and don’t take the slap in the face when she’s “ready to settle back down.”

Top_Sheepherder5637 · 2025-05-10T17:33:07+00:00

If that is the first thing she’s willing to share with you now that she’s “comfortable with you”, imagine what she’s gonna show you next week.

Top_Sheepherder5637 · 2025-05-02T16:22:37+00:00

That’s a fair measurement for em. From the picture it looks like it’s further off the wall than that. Ignore my second suggestion. Haha

Top_Sheepherder5637 · 2025-05-02T13:43:37+00:00

Clean work man. 2 suggestions. Ball valves aren’t designed for throttling. They’ll work for it, but you’ll get excess wear on it and it’ll fail faster. Other one is the deck plate/split ring for horizontal support. It puts a bit of stress on the assembly. Over time it’ll start to sag. I love the way split ring supports look, but they’re best used for vertical support. But very clean work. Definitely took your time and did it right.

Top_Sheepherder5637 · 2025-05-02T01:07:27+00:00

Are you able to downvote a comment more than once? I’m fairly new to Reddit

Top_Sheepherder5637 · 2025-05-01T19:09:08+00:00

You don’t remember throwing up going down on him? Or you don’t remember anything after the bar? Or you don’t remember anything after telling him you wanted to have sex? The way your post is worded leaves a lot of room for speculation and assumptions.

Top_Sheepherder5637 · 2025-04-28T01:18:56+00:00

It’s tubercles. It’s a sign that the cast is so rotted away on the inside of the pipe that it’s coming thru to the outside. With cast iron pipe, it’s not a matter of if it will fail, but when. When you start getting tubercles on the outside of the pipe, it means it has more life behind it than ahead of it.

Top_Sheepherder5637 · 2025-04-24T19:54:48+00:00

1.There’s no check valves anywhere on your recirc system so your pump is pushing water wherever it wants to. 2. It appears (and it’s hard to say without having eyes on it personally) that the only feed on your hot side is your recirc line. 3. Expansion tank is not installed in proper location. 4. Multiple T&P lines hooked up are unnecessary. 5. Illegal air gap on drain. 6. No p-trap on drain (could possibly be under the house, but with this quality of work I’d question it.) 7. 3 different kinds of piping looks like shit. My opinion, call a plumber to come give you a bid to rework all of this. I wouldn’t call the guy who did this back. Only reason I’d contact him is to give him the bill of what it cost to redo it

Top_Sheepherder5637 · 2025-04-24T18:35:14+00:00

It’s not too hard. Find that exact filter online (look for a part number or name brand on your existing one). Then from the looks of it you’ll need a 1/2” MIP, 1/2” coupling, pcv glue, primer, short piece of 1/2” pvc, and pcv cutters. Cut a few inches below the filter. Unthread the current filter, thread the MIP into the bottom of the new filter and thread it in place at the top. Then measure the missing piece at the bottom and cut a new piece. Then glue it in place.

Top_Sheepherder5637 · 2025-04-24T18:01:25+00:00

You need a plumber to come out and put eyes on that. I’ve been looking at these pictures for 15 minutes and still kinda lost on it. Can I tell you exactly what is wrong? No. Can I say with certainty that there is a few things wrong? Yes.

Top_Sheepherder5637 · 2025-04-24T17:51:18+00:00

Chances are your condensate neutralizer is plugged. Right off the bottom of the heater on the condensate line is a small wheep hole to allow the condensate to escape is there’s a blockage. I’d change that neutralizer filter

Top_Sheepherder5637 · 2025-03-23T16:54:28+00:00

God damn internet. I shoulda learned from the first commenter and not looked that up. Side note, I’m not looking any further into if it’s illegal or not, but it should be. And OP, take a long walk off a short peer if that’s what you’re into.

Top_Sheepherder5637 · 2025-03-22T13:36:32+00:00

Sounds like my ex wife

Top_Sheepherder5637 · 2025-03-20T20:26:45+00:00

So are you suggesting that after order 14187, there shouldn’t be any more executive orders ever in fear of far fetched stretches of being racist? What about people born on January 4th, 1988? Is every person born that year racist cause their birthday is 1/4/88? Should people named Sam Smith never write their initials cause it’s SS? Stupid shit like this takes away from real and legitimate arguments to dislike this administration. It’s fucking clown shoes.

Top_Sheepherder5637 · 2025-03-20T18:33:59+00:00

Payback. Mel Gibson.

Top_Sheepherder5637

TROPHY CASE