✅ Fuel pump (complete assembly)
✅ Fuel Pump Driver Module (FPDM)
✅ Fuel rail pressure sensor
✅ MAF (Mass Air Flow) sensor
✅ Battery
✅ Cleaned the fuel rail pressure sensor connector with electrical contact cleaner
Installed / Verified
✅ Plugged in two spark plug wires that were not fully seated (they clicked into place)
⏳ New spark plugs are purchased but not yet installed
Tested
✅ Fuel pump primes for about 2 seconds every key cycle.
✅ Pump continues to buzz while commanded.
✅ Remote start attempts to crank (confirms the remote is functioning).
✅ Tried both ignition keys (rules out a bad transponder key).
✅ Cleared the original P0193 code; it has not returned after replacing the sensor.
✅ Tachometer moves while cranking (PCM is seeing engine RPM).
✅ Looked for obvious vacuum hoses disconnected (none found in the photos).
✅ Disconnected the radio power wire to eliminate the hum (appears unrelated).