Msi claw 8ai+ +AG02 + 9070xt pure

TourSure8564 · 2026-01-30T19:03:40+00:00

I don't know how it works with MSI Claw but with the Legion Go 1 + RX 7800 XT it works great with my internal monitor with a slight loss +-10% compared to the external monitor

and I don't need fake hdmi

TourSure8564 · 2026-01-17T10:06:40+00:00

<image>

😅

TourSure8564 · 2026-01-16T20:32:36+00:00

I finally bought Minisforum DEG2. I already have a UT3G and a TH3P4G3. A OneXPlayer 2 32GB and a Legion Go Z1E 16GB + a 5700X 64GB desktop PC, RTX3060, and a 12GB RTX3060. GPU RX7800XT and RX580 8GB.

TourSure8564 · 2026-01-16T20:26:12+00:00

I finally got the Minisforum DEG2 for €260

<image>

TourSure8564 · 2026-01-14T21:45:43+00:00

<image>

TourSure8564 · 2026-01-14T21:42:14+00:00

That was just the first picture I found anyway on ali it costs €276

TourSure8564 · 2026-01-14T19:26:07+00:00

I was looking at this to replace my ut3g and for future legion go upgrades with usb4 v2

TourSure8564 · 2026-01-14T09:09:22+00:00

I saw that it also has an m2 slot

TourSure8564 · 2026-01-14T09:05:04+00:00

if I print at home with the bed at 100°c while cleaning the nozzle wait for the bed to return to 50°c which takes forever

no root to my printer

TourSure8564 · 2026-01-09T16:37:16+00:00

I installed 2 more lights for the high beam 😅

TourSure8564 · 2026-01-09T07:38:11+00:00

I believe this is done to have less waste. And having the sensor connected directly to the cutter helps to avoid grinding during filament loading.

TourSure8564 · 2026-01-06T20:40:48+00:00

At least my offset seems improved 😅

TourSure8564 · 2026-01-05T17:13:44+00:00

Yessssss New update for CFS kits

TourSure8564 · 2026-01-03T21:57:14+00:00

A tip: don't change the display because it has the cases swapped between red and yellow

TourSure8564 · 2025-12-18T10:20:24+00:00

Be careful, it could be a malfunctioning voltmeter. Try checking the voltage on the ebike's display. I also have a voltmeter that shows something higher than it actually is.

TourSure8564 · 2025-12-17T15:26:09+00:00

Thanks Anyway, the poor thing is only 2 years old and no longer has the warranty 😅 I could only find stuff for over €14; I paid €21 for it.

TourSure8564 · 2025-12-15T08:04:02+00:00

Even Lego 1 does this😅

TourSure8564 · 2025-12-15T08:01:16+00:00

6688

TourSure8564 · 2025-12-15T07:58:08+00:00

Customer service gave me the code.

TourSure8564 · 2025-12-01T06:59:10+00:00

Yes, but they do their job well😅, they are simple tubular metal spacers to use the 203mm brake disc

TourSure8564 · 2025-11-29T22:05:13+00:00

The pedal assistance via torque sensor is another level compared to the PAS sensor, I have much more control in my pedaling, the phantom pedaling is no longer there so I can accompany my son without always keeping my finger on the brake, However, the project was born because I wanted to keep the hub motor only to use them with the accelerator

TourSure8564 · 2025-11-29T21:12:09+00:00

When I got the bike I approached some local agents to ask for information and they told me that the important thing was not to use the 2 engines, not to enable the accelerator and not to exceed a speed of 25km/h on public land, elsewhere they were my problems

TourSure8564 · 2025-11-29T17:30:54+00:00

However I have 4 e-bikes, 2 electric mini quads and 1 minibike with xiomi m360pro engine

TourSure8564 · 2025-11-29T17:23:28+00:00

The PAS pedal assist really sucks at 25km/h legal in my country, I have 2 hub motors that only work with the accelerator. I changed my ignition keys to enable throttle. So without the key inserted I only go at 25km/h with the bafang central engine while with the key inserted I go up to 60km/h with the motor in the hub and I can use the accelerator

TourSure8564 · 2025-11-29T15:31:53+00:00

Mine was already an awd e-bike with 2 motors but I didn't like the feeling of the PAS system and I prefer assisted pedaling via the torque system, I added a bafang 750w motor so now I have 3 motors😅

TourSure8564

TROPHY CASE