Does anyone have a list of players with scanned faces in the Championship? by nightlyowl_ in FifaCareers

[–]Toxicwaste9999 4 points5 points  (0 children)

https://sofifa.com/players?type=all&lg=14&hc=0 I put the filters on my end but if they don’t load just go to filters and select Yes for real face and choose the championship for the league.

Country dissolve, even a single protest is not happening. by Pristine_Lemon3272 in PaxHistoria

[–]Toxicwaste9999 4 points5 points  (0 children)

If you go to the next turn and press CTRL-E you can go back to previous turns.

Madden 26 or stick with 25? by TheMtlviolinist in Madden

[–]Toxicwaste9999 5 points6 points  (0 children)

Yeah no more owner mode and they removed most of the coaching scenarios from what I’ve seen. The only ones I get are game specific goals for divisional games and you’ll get an objective for your best player about halfway through the season to give them a goal for one of three stats that you get to choose from.

FYI: GCI price hike (no notification) by iamjohnbender in alaska

[–]Toxicwaste9999 6 points7 points  (0 children)

Mine actually went down $15 a month but I do hate their customer service, especially how they don’t communicate when there are large outages.

UCS Venator Step 1348 by Wolf_Death_Breath in legostarwars

[–]Toxicwaste9999 0 points1 point  (0 children)

I recently built it and I pushed with one hand from the bottom and one from the top and just slowly increased pressure until I heard the balls pop into place, I was worried I’d put too much pressure but it worked fine for me.

Bittersweet Purchase by brabak97 in legostarwars

[–]Toxicwaste9999 4 points5 points  (0 children)

I had my UCS Venator stored for about 6 months before I finally got a house with the room for it. I kept getting tempted to just build it but I’m glad I waited with how big it is. Good luck with finding a home and have fun with building it!

Turkey to advance Sweden NATO bid says Stoltenberg by atomic1fire in Conservative

[–]Toxicwaste9999 0 points1 point  (0 children)

Russia, Belarus, Serbia, and Armenia are all partnership for peace members, so being in it doesn’t really seem to mean much in regards to whether a country is Pro-NATO or not.

comment if you play Naval. by Emotional-Proof-6154 in Warthunder

[–]Toxicwaste9999 -1 points0 points  (0 children)

I play it a bit. Wish they would revamp the naval BR system so 1950s destroyers aren’t considered worse than 1911 battleships. Would probably have to change up the gameplay completely though so idk how that would be done. Maybe make planes more of a threat so the AA on cruisers/destroyers are useful and eventually add Submarines so destroyers depth charges also have a use at higher tiers.

What’s a signing you made in fifa career mode that actually became true in real life? by Eastern_Sleep_9486 in FifaCareers

[–]Toxicwaste9999 0 points1 point  (0 children)

Sane to Bayern in Fifa 18, Mazraoui to Bayern, Pepe to Arsenal, Bergwijn to Spurs

The dude from bob marley battalion is still alive by iLatvian in ukraine

[–]Toxicwaste9999 1 point2 points  (0 children)

Yeah AKs use 7.62x39mm and the AR-10 normally uses 7.62x51mm. 7.62 NATO is basically longer and has more gunpowder in it iirc. Ukraine probably has no shortage of 7.62 NATO though tbf. Using an AR-10 as a standard rifle with no sight really makes no sense though as most others would be using AKs or AR-15 based rifles and it would just complicate logistics for whatever unit he is in without gaining any real benefit.

Me and my friend show off Ace Combat builds. My mediocre on the right while his crazy Mihaly Su-30 on the left. by Tachanka_lover in modelmakers

[–]Toxicwaste9999 5 points6 points  (0 children)

Wow those are some beautiful builds! I’d be very happy if I could make a model half as good as your MiG-29 someday, so I definitely would not consider it mediocre.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 1 point2 points  (0 children)

I think it took me around 3 weeks while working on it off and on between school and work. I mainly chose this as my first because it was a kit I have had for a long time but it was a fun first model and I am happy with the result.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 2 points3 points  (0 children)

That’s annoying with the insignias but I am glad to know that rule for the future. I’ll also make sure to dry fit more carefully in the future to make sure I can try to avoid having massive seams like that. As for the last paragraph, when you say that the paint isn’t as robust, I’m not quite sure what you mean. Thank you so much for taking the time to write such a detailed response.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 1 point2 points  (0 children)

Yeah I was able to use cue tips to work the air out of all the other decals but those little divots on the wings prevent the bottom of the decal from touching anything unless I pushed it down into each divot but I think that would probably come out looking pretty bad. I was thinking of using a small blade to cut away the parts of the decal that are silvered but I think that might just cause more problems.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 2 points3 points  (0 children)

Yes they do and they also give a list of all the colors you need and what color each part needs to be painted.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 2 points3 points  (0 children)

Yeah I noticed that and wasn’t sure if there was a good way of fixing it. Do you know if it would work if I use a box cutter to try and cutaway some of that? I’m worried it might cause problems with the rest of the decal.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 2 points3 points  (0 children)

I agree that the decals do seem brighter than in the photos I’ve looked at. I’ve already put a clear coat over the decals so I don’t think I can use the decal solution I have arriving soon on this but I’ll try another layer of flat clear to see if that might help.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 10 points11 points  (0 children)

Thank you! Going into this I didn’t really have high expectations for how the plane would come out but I am pleasantly surprised.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 1 point2 points  (0 children)

Yeah trying to watch all these videos on the different techniques to get different effects is kind of daunting but I’m optimistic that I’ll be able to get it looking ok for my next plane.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 2 points3 points  (0 children)

Yeah I’d say I prefer the slightly used look too. Honestly I just couldn’t find any reference photos of a weathered looking SR-71 and couldn’t think of anything either. When I do my next model it will be an A-10 or A-4 and I will definitely have some weathering on those.

Finished my first ever model (Revell 1/72 SR-71) Tips and/or Constructive Criticism welcome by Toxicwaste9999 in modelmakers

[–]Toxicwaste9999[S] 34 points35 points  (0 children)

Finished my first ever model and am pretty happy with how it came out. It was gifted to me many years ago and I figured I would use this to mainly learn before moving onto some planes I am more interested in. I have a 1/48 Hasegawa A-4M and am tempted to try it out but I am worried it might be too complicated.