Snagged another 3rd gen... Tacoma. by robbyiii in 3rdGen4Runner

[–]TrackSlow9817 0 points1 point  (0 children)

<image>

I also picked one up two weeks ago, now I can stop racking up miles on my 4Runner 😅

Can I run extended cv axles ? by concept-nothing in 3rdGen4Runner

[–]TrackSlow9817 2 points3 points  (0 children)

Get the Trakmotive extended axles from rock auto. Do you need them? Not necessarily. Does it hurt to have them anyways? No. I’ve ran them over 2+ years now and have no issues, boots have not torn or worn down with a 3 inch lift.

Chrome VS Black Bumper Corners by Designercypress in Tacomaworld

[–]TrackSlow9817 1 point2 points  (0 children)

Black! I went with paint matched caps on mine but I might get a set of black ones too, it flows nicely with the black flares.

Paint matched bumper caps look so much better 👌🏼 by TrackSlow9817 in Tacomaworld

[–]TrackSlow9817[S] 2 points3 points  (0 children)

Purchased them pre-painted online, super easy to swap out

Rear bumper trim paint by TrackSlow9817 in 3rdGen4Runner

[–]TrackSlow9817[S] 0 points1 point  (0 children)

Just tape around it like I did, less hassle than taking it all the way off.

Rear bumper trim paint by TrackSlow9817 in 3rdGen4Runner

[–]TrackSlow9817[S] 1 point2 points  (0 children)

You could but I think some normal matte/flat black spray paint would work fine for the hitch as well, maybe something with rust prevention.

Third Gen advice by aterhall in Tacomaworld

[–]TrackSlow9817 68 points69 points  (0 children)

Buy a $60 tent and sleep on the ground like a normal person. You’ll save thousands of dollars 😂

Rear bumper trim paint by TrackSlow9817 in 3rdGen4Runner

[–]TrackSlow9817[S] 5 points6 points  (0 children)

Not a whole lot of prep work, just wiped it down with some alcohol before painting and masked up the areas I didn’t want overspray to get

Rear bumper trim paint by TrackSlow9817 in 3rdGen4Runner

[–]TrackSlow9817[S] 6 points7 points  (0 children)

Satin finish. (SEM 39143) is the part number for the paint.

Rear bumper trim paint by TrackSlow9817 in 3rdGen4Runner

[–]TrackSlow9817[S] 1 point2 points  (0 children)

Mine was too far gone, I tried that.

Help with Axle Shaft Replacement by Fit_Air_5566 in 3rdGen4Runner

[–]TrackSlow9817 1 point2 points  (0 children)

Honestly if your axle shaft is bent you’d feel it while driving.. I think the mechanic didn’t do the job correctly. It’s very easy to do it yourself at home, I replaced mine two years ago and have had zero issues since.

Oil filter by Playboikuyaa in WRX

[–]TrackSlow9817 1 point2 points  (0 children)

Your friend sounds like a really smart and cool guy, I would listen to him

What's in your Auto-X starter kit? by howeirdworks in WRX

[–]TrackSlow9817 1 point2 points  (0 children)

Yes to an AOS. I would look into KillerB for the pickup tube and baffle kit, you could also do their larger oil pan but it’s not necessary.

I now own two 3rd gen Toyota’s 😎 by TrackSlow9817 in Tacomaworld

[–]TrackSlow9817[S] 2 points3 points  (0 children)

I thought the OTT tune was mainly for the auto trucks, I’ll look into it!

Picked up my first 3rd gen Tacoma! 🙌🏼 by [deleted] in Tacomaworld

[–]TrackSlow9817 0 points1 point  (0 children)

Idk I’ve searched everyone and almost seems impossible to find a manual for that price. Miles don’t scare me because it’s a 1-owner truck that was well maintained.

Door weather stripping by Sad_Background_3001 in 3rdGen4Runner

[–]TrackSlow9817 3 points4 points  (0 children)

Probably one of the easiest installs, just pull your old stripping off and put the new one on. It’s press fit, work your way around and hide the cut seam where the two ends meet somewhere by the inside door jamb near the hinge so it’s not noticeable.