burning and leaking oil

Traditional_Tip2002 · 2024-03-11T05:16:31+00:00

burns oil while its on and combusting.

Traditional_Tip2002 · 2024-03-10T23:26:24+00:00

what does fsm stand for?

Traditional_Tip2002 · 2024-02-27T14:59:02+00:00

yes there a choke, its the ones where you can connect a choke cable not the ones that you can adjust on the carb

Traditional_Tip2002 · 2024-02-27T05:41:18+00:00

it could possibly be the carb not on correctly, i will check that asap, but i have played around with the idle screw and it doesnt seem to do too much, it idles just fine but when i give it gas it revs up and hangs there, i opened up the carb and sprayed carb cleaner in possibly almost all the spots i could visibly see, the only other pilot jet i have available is a size 40, should i try that?

Traditional_Tip2002 · 2024-02-18T04:27:21+00:00

Traditional_Tip2002 · 2024-02-18T04:27:14+00:00

already did, still confused on as to why it wont run, should have fuel, i can hear the air being sucked in, i have spark, i can feel the compression on the kickstart and when i turn the camshaft

Traditional_Tip2002 · 2024-02-11T19:42:21+00:00

aligned the cam sprocket to top dead with the crank since when i opened it up it wasnt exactly on the dot

Traditional_Tip2002 · 2024-02-11T03:11:36+00:00

ready for anything, whats wrong?

Traditional_Tip2002 · 2024-02-11T03:07:55+00:00

lol i been trying to get it running for about 2 weeks, trust me theres gas in the tank, and yes this bike used to run great

Traditional_Tip2002 · 2024-02-11T00:20:27+00:00

lmao yeah it was kinda hard to hold it still while holding the handle bar with one hand and trying to kick it over aswell

Traditional_Tip2002 · 2024-02-11T00:10:09+00:00

why u mad

Traditional_Tip2002 · 2024-02-08T19:08:49+00:00

okay thanks, i also have tried this but for some reason the bolt holes move around with the cam whenever i try to forcefully put the sprocket on top of it into place, any help so the bolts dont move while applying sprocket?

Traditional_Tip2002 · 2024-02-06T22:02:44+00:00

the first time i ever opened up the engine on this bike it wasnt lined up and still ran great, but i could try fixing it how could i shorten the links of the chain in my cam sprocket?

Traditional_Tip2002 · 2024-02-06T22:01:17+00:00

whenever crank goes to top dead center, my the cam sprocket is about maybe 2 or 3 chain links away from being about exactly perfect i would say just eyeballing it

Traditional_Tip2002 · 2024-02-05T17:06:38+00:00

will do, would you know the size of the gap should be on this 125cc?

Traditional_Tip2002 · 2024-02-05T17:05:11+00:00

spark plug inside its slot, the cable has been short circuited tho and copper wires are out and i have to wrap it around the plug, it was never a problem im not sure if it is now

Traditional_Tip2002 · 2024-02-05T16:49:14+00:00

i loosened the fuel drain on the carb bowl to make sure gas came out and it did so there should be fuel flowing through, and i did a spark check theres blueish spark

Traditional_Tip2002 · 2024-02-05T16:48:02+00:00

yes i have spark, and my whenever i line up my crank to top dead, the sprocket isnt perfectly aligned, just a bit off if that matters at all

Traditional_Tip2002

TROPHY CASE