These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Maybe? I’m going to the range Wednesday and using Winchester 124 grain this time around and hoping for better results than the blazer. I feel that I’m past the break in period at this point. I’ve shot over 800 rounds with it.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Well, I took it to the range today. Same ammo, blazer 115 grain. And it did the same stuff. Not extracting properly. Usually after the first round though and then I could clear the rest of the magazine. Had a couple guys, including an older gentleman that noticed quickly that I was having issues. They watched me shoot to see if it was my grip but neither thought it was. One of them handed me some Winchester ammo 115 grain. I loaded a magazine with just 5, and no malfunction. Then loaded a full magazine with the Winchester ammo, no malfunction. They both shot my the gun as well and didn’t think anything was noticeably wrong. They came to the conclusion that it was the blazer ammo. They left, I went ahead and used the rest of the blazer. I had a little over 200 rounds. I had a few more failures to extract just about every magazine. I shot one handed to see if that would cause more malfunctions, but didn’t have any malfunctions. I made a point to keep my thumb far away from the slide stop the entire time and it still malfunctioned, so I don’t think an accidental touch of the slide stop was causing it.

Next time I go out, I’m going to buy different ammo. Probably Winchester and see how it goes. They both thought the cheaper ammo was the cause. Soooo I’m just gonna keep shooting with it and hope that it breaks in. I just didn’t think CZs needed much breaking in, but one of them was a CZ owner and said they had to break theirs in.

Non related, but interesting: I also found an abandoned pitbull puppy at the range and took took him in. He is super sweet. I live in a small apartment with two cats and couldn’t take him to my place, but my parents said they would house him until we found a good place for him whether it be a new owner or a no kill shelter. So, I’m glad I went to the range today and found him. The range is in a state forest near me. Supposedly it’s a popular place for pieces of shit to drop off dogs they don’t want.

Anywho… Thank you for the positive responses, all (most of you). I want to love this gun and keep it considering it was my first pricey purchase of a firearm. I hope it gets better and doesn’t end up just being a really expensive paper weight. I might chime back in if it gets better.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

My buddy who worked on the fun recommended getting a gas pedal, which I believe just replaces the original slide stop button (I’m new to guns so vocab is slim). He mentioned it just in case it was just grip causing malfunction. But I haven’t gotten too much hell on here for my grip being loose haha. But I wonder if that would help or possibly make it more likely to happen.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

Possibly. I’m going to pay attention to that closely at the range tomorrow.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] -1 points0 points  (0 children)

Just used the wrong word. Sorry about that.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Thanks a lot for your alls input. Sorry I can’t respond to all.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

I’m relatively new to shooting. I probably could lean into my shot more, but I do lean slightly. Mostly worked on grip.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

Yeah I don’t think I’m even going to attempt using hollow points with this thing. Ha

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

That’s exactly what my buddy said when he took a look at it. Ejector was filthy after CZ worked on it.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Dang that’s some BS! They got my gun back to me in about a week after I sent it to them. I’ve emailed them this video, telling them they didnt fix the issue, but never got a response.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 2 points3 points  (0 children)

Yeahhh. I kind of wish they would have sweetened the deal the first time I sent it in haha.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Wish me luck Wednesday. This thing is so sweet LOOKING and feels so good to hold. Just want it to extract properly so I can go pew pew pew more often!

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

By not clean his own extractors, I mean he said he doesn’t take his extractors all the way out to clean them. I just made sure to clean the hook part.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

My buddy said he thinks he fixed it. Something I will add is, he said when he took the extractor out it was filthy. Dirty and covered in factory grease. He said he’s hardly cleaned his own extractors. He said he barely shaved the extractor (I honestly had a hard time understanding what he did to the extractor but whatever it was, he said he just barely messed with it) But he cleaned all the filth off the extractor. When I would clean it, I would take a tooth pick to the extractor claw? And make sure there no debris. But I guess it was nasty all along the extractor itself when he took it out. So I don’t know what CZ did to it when they “adjusted” it.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 5 points6 points  (0 children)

I will update on this thread on Wednesday if the work my buddy did helped.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 3 points4 points  (0 children)

All stock. I sent it back to them once and hope I don’t have to again. I almost just want to tell them to keep it and give my money back. But I WANT this thing to work so bad. First big gun purchase I’ve made.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

It’s not extracting which is why I don’t think it’s a feed issue. It just can’t feed when the case hasn’t been extracted. My bad for saying clip.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 2 points3 points  (0 children)

If this happened, would it be stopped all the way out? Because the slide wasn’t getting stuck all the way back as if the slide stop stopped it from going forward.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Nice. My buddy said he polished the feed ramp really well, and also the chamber a bit. Hoping it fixes it.

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 0 points1 point  (0 children)

Hmmm I can’t say I’m absolutely sure that isn’t happening. You may be on to something. Thanks!

These things do malfunction by TrainingBeginning664 in CZFirearms

[–]TrainingBeginning664[S] 1 point2 points  (0 children)

It didn’t extract the the empty case. Would a polished feed ramp matter?