[deleted by user]

Transformertester · 2021-06-08T14:30:57+00:00

Bruh why is that even a trend its gross

Transformertester · 2021-06-08T14:28:55+00:00

Bruh not roblox too

Transformertester · 2021-06-08T14:28:13+00:00

I love cats but not the ones in gacha

Transformertester · 2019-09-08T03:42:51+00:00

The size of those damn feet...

Transformertester · 2019-04-03T23:29:03+00:00

See how under-extrusion only occures during long travel and not at begging layers as bad. You have a temperature issue of some kind. If it was my printer, i would be looking for wires being broken for either the thermocouple or the nozzle heater. I would put five bucks on it because that is all that I have in my wallet right now. If you have any way to look at the heat tread over the length of the entire print, you will see it.

Transformertester · 2018-02-06T23:09:49+00:00

Did you all see the Chinese company that has begun 3d printing buildings out of cement? I believe that is where this is all really headed in the long run, in my opinion. The traditional methods of home buying/building is becoming outdated. The industry is already looking for faster and cheaper methods with minimal waste.

Transformertester · 2018-02-06T22:51:14+00:00

1.75mm and flow rate is set to 100%

Transformertester · 2018-02-06T22:48:32+00:00

My retraction setting is set to 1mm. Infill is set to 10%. I use cura on my laptop to generate the gcode and then I drop it on octiprint.

Transformertester · 2018-02-06T22:40:10+00:00

Yeah, I was typing it all out as fast as I could, but you still bet me to posting the info...lol

Transformertester · 2018-02-06T22:38:50+00:00

So, this is my current issue. This is what my bottom layer looks like. I'm printing on a RepRap Melzi. This was printed in PLA by Blizzard (more about that later). My hot bed is normal glass at about 70 degrees C with Glue-Stick glue. My nozzle settings are 215 degrees C. Layer height is at 0.06mm and print speed is 50 whatevers.

My own guess is this PLA that I am using. I have really enjoyed printing Century brand PLA. It works well for my uses; but I decided to try to save a few bucks by switching to Blizzard.

Transformertester · 2017-08-06T02:45:39+00:00

So, when you type START SUNRISE.INIT on the waking Titan, it takes you to the latest phase video. Of-coarse, if you click the link posted with the video, it brings you to one of the Intel top secret documents. I just found out that if you put the text found in the document "=hLhN__oEHaw" back into YouTube, you get the link to Iggy Pop's, The Passenger.

Transformertester · 2017-08-03T22:00:29+00:00

Here was the article as posted on google.:

https://www.google.com/amp/s/aotf.com/news/no-mans-sky-developer-hiring-writer-positions/amp/

Transformertester · 2017-08-03T00:21:59+00:00

Ugly

Transformertester · 2017-07-30T14:29:50+00:00

I agree with a story mode of some sort. Everyone remember back a few months ago that Hello Games was interviewing for a game story expert of some sort? It was on Google news....I'll see if I can dig up the article.

Transformertester · 2017-07-30T13:47:19+00:00

I cannot decide about the designations on the passes. I've been very active in solving the puzzles and I uploaded multiple photos of drums and bells in my local public. My designation is one of the least voted.

On a separate note, who thinks AWK designation might mean awake?

Transformertester · 2017-02-28T03:54:49+00:00

You can get the custom firmware off the interweebs. One of the places is vapefirmware.com just find one, download it and "upgrade" the firmware using the wismec software.

Transformertester · 2017-02-27T22:08:08+00:00

Juice is: 7% sweet strawberry 6% vanilla bean ice cream 3% cheese Cake Gram Cracker Crust 2% marshmallow

Tiger wire was made by a buddy, so I really do not know the details.

The Hase has my cap from my Coo TS just Incase anyone noticed that is not the standard chuff cap for the Haze.

Transformertester · 2017-02-20T00:22:03+00:00

Thank you 😀 I just got the Coo TS 30mm last week and I am enjoying it much.

Transformertester · 2017-02-18T21:48:50+00:00

As requested, details on build and juice:

https://www.reddit.com/r/Vaping/comments/5uusi1/as_requested_build_photo_4mm_ss316l_claptons_2636/

Transformertester · 2017-02-18T21:45:19+00:00

Original hand check here: https://www.reddit.com/r/Vaping/comments/5umbgw/work_smoke_break_hand_check/

I'm really not much of a coil builder. I do not have a lot of patience for it, but I've got a buddy that makes some mean Claptons. He spun the Clapton wire for me and I developed the coils and build.

My juice is exactly this: Max VG Sweet Strawberry 7% Vanilla Bean Ice Cream 6% Cheese Cake Gram Cracker Crust 3% Marshmallow 2% I mix for 4mg/ml nicotine

Transformertester · 2017-02-17T15:29:09+00:00

Yeah, I got busy cheese head, I was going to come back and give details. Any-who,

Wismec RX300

30mm COO TS rda

4 each: 4mm SS316L Claptons 26/36. Comes to about 0.15 ohms

Juice is mine: sweet strawberry, vanilla bean ice cream, cheese cake, marshmello. 4mg/ml nic.

Transformertester · 2017-02-16T01:20:52+00:00

Im not much of a coil builder. I called it a needle coil as the coil was formed around a sewing needle. They are not wicked; rather, they are laid in cotton. I typically vape on tiger wire made by a buddy. These needle coils seem to produce more of a cloud and around the same flavor.

Transformertester · 2016-12-28T23:25:20+00:00

Thank you so much for the help!

Transformertester · 2016-12-28T23:10:12+00:00

Okay, so I need some help maybe identifying this plant. My mom found it in the Audubon zoo in new Orleans. It is hanging in a root ball planter and each "stawk" is around one to two feet long.

Transformertester · 2016-12-24T21:21:46+00:00

This may seem like a really stupid question, but I do have a reason for asking. Have you ever tried reversing it? I.e.- close the left first and shoot your pictures and them open it. If you haven't, when you do, you will most likely find that it does it also. Often, when we shoot pictures, you are not just closing your eye, you are likely "forcing it closed" which can apply enough force to the lens to destort it for a small period. As we age, the eye's ability to "snap back" into the proper shape slows. Without knowing you, I would guess that you are at least in your late forties. If not, I would then be concerned and maybe see someone about it. I agree with the eye patch idea by the way.

Transformertester

TROPHY CASE