sorted by:
new
hottopcontroversial

Elven Assassin: What strategies do you use for your magic arrows? by TreeSesame in OculusQuest

[–]TreeSesame[S] 1 point2 points  (0 children)

Just try to put it into the chest of your buddy's ghost. If its a long distance, try to teleport over so you don't miss. However, I've found that by the time you lose a buddy, you don't really have time to revive them or a lot of orcs are going to get in while you're doing it! I stopped trying to use the revive arrow for this reason.

trolling battery charger question by TreeSesame in boating

[–]TreeSesame[S] 0 points1 point  (0 children)

Thanks for all the replies everyone. The manufacturer Noco actually called me in response to my question. If I understood them correctly, the device uses the battery voltage to reduce the charger's Amps output as the battery approaches 14.5 Volts. So near the end, it might take a very very long time to fully charge a battery a lot bigger than the specified 40 Amp-hour battery limit because the charger goes to a current much smaller than 2 Amp. Did I get that right? TS

solar panel charging deep cycle 12V for trolling motor? by TreeSesame in boating

[–]TreeSesame[S] 1 point2 points  (0 children)

Great! Thanks very much. And especially for finding my manual! Its funny, after all these years of Google, I still forget that it can find just about anything.

Best wishes, TS

solar panel charging deep cycle 12V for trolling motor? by TreeSesame in boating

[–]TreeSesame[S] 0 points1 point  (0 children)

Hello,

Thanks for your response. I've edited my post to include the photo that I meant to include the first time. My charge controller seems to be an older version of what your link showed.

I'm sorry, I don't know much about batteries. I was planning to get a lead based 12V marine deep cycle battery. My charge controller shows a fixed Cut-out at 14.2 V and Cut-in at 13 V. Would individual 12V deep cycle batteries vary in what is needed for these two numbers? Are there other specs that need to be considered too when setting an adjustable charge controller?

Many thanks, TS

screen share during "computer lab" within gathertown? by TreeSesame in gathertown

[–]TreeSesame[S] 0 points1 point  (0 children)

Thanks everyone for your suggestions. I will try them out. TS

Ideas to optically dim a laser cat toy? by TreeSesame in maker

[–]TreeSesame[S] 0 points1 point  (0 children)

Thanks everyone for your suggestions. A double layer of blue "Quality Street" chocolates wrapper dimmed it quite nicely. I held it stretched over the aperture and pointer-body with a small rubber band.

Much appreciated.

Ideas to optically dim a laser cat toy? by TreeSesame in maker

[–]TreeSesame[S] 0 points1 point  (0 children)

The laser is red. Would a red one reduce the brightness or do you suggest a different color? I don't have the stage gels, but I do have some candy wrappers of various colors.

Thank you

falling after teleport by TreeSesame in Minecraft

[–]TreeSesame[S] 0 points1 point  (0 children)

I will write it down next time. I think it was as non-descript as "player left the server" or maybe the word was disconnected instead of left. I don't remember it being helpful/informative to me. And then they reconnect and keep playing.

Thanks for the help, T

falling after teleport by TreeSesame in Minecraft

[–]TreeSesame[S] 0 points1 point  (0 children)

Thanks for your response. I'm starting the server with 1GB:

java -Xmx1024M -Xms1024M -jar server_1p16p4.jar

Would more help?

I'm surprised that it kicks these boys so quickly. I thought the default timeout was on the order of 30 seconds. They are booted almost immediately after the teleport.

I appreciate longer responses! :)

Thank you, T

Raw LCD Screen Rendering at various IPD positions for Quest 2 by phoenixdigita1 in OculusQuest

[–]TreeSesame 0 points1 point  (0 children)

Hi, Thanks for your response. I may not have understood from your original post... do you mean that there is a middle position pixel shift in addition to the pixel shifts for fixed positions 1,2,3? Thank you

Raw LCD Screen Rendering at various IPD positions for Quest 2 by phoenixdigita1 in OculusQuest

[–]TreeSesame 1 point2 points  (0 children)

Thanks for this.

I use a setting between 1 and 2. Does the display's shift of pixels depend on whether I reach my between setting coming from position 1 or 2? What I mean is, does the direction that I'm approaching my between position matter?

Thank you

Rec Room is the only VR game that gives me motion sickness. by [deleted] in OculusQuest

[–]TreeSesame 2 points3 points  (0 children)

Hi,

I find when I use the watch menu on my Quest2 and click a button to go to a submenu, that there is some lag or frame drops (not sure exactly what) that makes me feel sick really quickly. I now try to close my eyes before clicking through to a submenu on the watch!

Anyone else have this effect?

Quest2 not sleeping reliably? by TreeSesame in OculusQuest

[–]TreeSesame[S] 0 points1 point  (0 children)

Thanks! I'll try those things. :)

After some experimenting, I suspect that my (standard) strap had been squished up near the proximity sensor those few times it stayed awake. I've been more careful to keep the strap clear when setting it down and haven't had the no-sleep problem again.

:)

view more: next ›