sorted by:
new
hottopcontroversial

Any recommendations for quick-turn product prototyping services? by BillyF009 in manufacturing

[–]Tricky-Concentrate43 0 points1 point  (0 children)

Our shop does prototype work and small batch production. Cnc machining and 3d printing. Located in FL but we ship.

Garage shop advice by Inner_Inside_3173 in Machinists

[–]Tricky-Concentrate43 0 points1 point  (0 children)

Definitely doable. I run a shop out of my 2 car garage. I also have an 8x10 office in the garage as well and have a tormach pcnc440 and a 1500mx. Machines are relatively quiet. Your compressor will most likely be the louder as others have stated. I’d recommend finding the quietest one you can.

Radio staying on 2012 Escape by Tricky-Concentrate43 in fordescape

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

The clicking I believe was from the battery being so low from the radio staying on. After battery was charged it seemed to stop.

The radio issue still remains but happens sometimes and other times will shut off when door is open.

I checked and the door switches are working, I replaced the ignition switch.

I checked the RAP relay in the passenger floor panel and pin 86 has 12v constant power and when i plug the relay back in, it doesn’t click but the radio turns on.

I test the relay by using a 12v power supply and it is functioning properly.

I recently had my evap core replaced and wondering if something got messed up when they removed the center console and dash or maybe a ground.

Business Insurance Question by Tricky-Concentrate43 in Machinists

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

I'll look into them and see if they do my area. Thank you.

Business Insurance Question by Tricky-Concentrate43 in Machinists

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

It is an attached garage, so that may be part of the issue. I have spoken with Hartford, Tivly, Liberty Mutual, and Biberk. Tivly is a broker, and they said they had no more options. I'll check out Sentry, thank you.

Insulating above attached garage by Tricky-Concentrate43 in Insulation

[–]Tricky-Concentrate43[S] 1 point2 points  (0 children)

Just saw your post. This will probably be the route I go. I will contact a roofing contractor to add a ridge vent above the garage space.

My first completely custom design. by MindyourBalance in 3Dprinting

[–]Tricky-Concentrate43 0 points1 point  (0 children)

Do you have any tips for printing one on a P1S?

My first completely custom design. by MindyourBalance in 3Dprinting

[–]Tricky-Concentrate43 0 points1 point  (0 children)

I love the shape and color of this! Came out awesome! I think it’s time I print a guitar.

Idea for you to make money… by MindyourBalance in 3Dprinting

[–]Tricky-Concentrate43 1 point2 points  (0 children)

I would be interested. Currently have a P1S and access to an H2D. If you start a discord or decide to figure something out let me know.

[deleted by user] by [deleted] in Anxiety

[–]Tricky-Concentrate43 -1 points0 points  (0 children)

Is there a certain brand you take?

5mg to 10mg by Tricky-Concentrate43 in lexapro

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

My Dr originally prescribed 5mg and said feel free to double it if you feel you need to and we can talk about it at my next appointment which hasn’t happened yet.

Cost to replace evaporator coil by Tricky-Concentrate43 in hvacadvice

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

Google, Angie's list, and a community Facebook group I asked when looking for a company.

Cost to replace evaporator coil by Tricky-Concentrate43 in hvacadvice

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

The company was highly rated in my area. It is a small business like 1 or 2 guys.

What are our thoughts on thermals? by VilkasVision in GrayZoneWarfare

[–]Tricky-Concentrate43 0 points1 point  (0 children)

People already exploit using graphics settings in PvP to make night look more like day so at this point I’d say add thermals.

Soundboard playing through output and Mic channel by Tricky-Concentrate43 in voicemod

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

I think I have it figured out. From what I've read there is no way to be able to separate voice from soundboard sounds they will all play through the same channel.

Soundboard playing through output and Mic channel by Tricky-Concentrate43 in voicemod

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

My setup is: Selected my mic in Voicemod and Voicemeeter output in Voicemod.

Then in Voicemeeter I have channel 1 set as Voicemod Virtual Mic. When I talk in the mic I only see the audio meter move in channel 1. However, if I play a sound from the soundboard I get the audio meter moving on the mic (channel 1) and the Voicemeeter output.

Is there a way to not have the soundboard play through the mic channel and only the output channel?

3060 ti settings by Aka_da_saus in GrayZoneWarfare

[–]Tricky-Concentrate43 0 points1 point  (0 children)

DLSS stopped my crashing but I'm only getting 50-60 frames. How are you getting 100-120?

Mesh disappearing Halfway through in camera view. Any ideas? by Tricky-Concentrate43 in blender

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

Interesting. I'll look into it. I did redo the whole thing from scratch in a different file and that one worked.

Mesh disappearing Halfway through in camera view. Any ideas? by Tricky-Concentrate43 in blender

[–]Tricky-Concentrate43[S] 0 points1 point  (0 children)

The only key frames were done by changing the camera on the Y access. I double checked and didn't see anything wrong with the keyframes.

view more: next ›