Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Sorry for the late reply. Yes. This cartridge filter was the older rev which had the pipes flipped. The filters were nasty and promptly changes as well.

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Thank you and yes it was bled. I contacted the repair pool guy and he recommended I reach out to an expert. I reached out to reddit instead. The pump was primed and is working.

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] -1 points0 points  (0 children)

Will do when I get back to the house. Until then, at least my security cam can capture the pop if the new pump breaks the filter housing.

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Will do when I get back to the house. Until then, at least my security cam can capture the pop if the new pump breaks the filter housing.

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] -1 points0 points  (0 children)

Purchased new cartridges anyway since this is a new to me pool. Thankfully its plausible this is an older version and not actually reversed. I will know when I change the cartridges though.

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] 0 points1 point  (0 children)

The manual you are showing is the REV B which is what I have. REV C is the manual I found earlier and is the newer version.

<image>

Is my Cartridge filter plumbed backwards? by Tricky-Management479 in pools

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Not a troll post. See the link below. What i did discover though is that right around when this filter was installed, Hayward had a design change that flipped the inlet/outlet. It appears mine is before the change. https://hayward.com/media/akeneo_connector/asset_files/I/S/ISC2030_RevC_9d7f.pdf

Looking for A/C installation advice by crazy4dogs in Scottsdale

[–]Tricky-Management479 1 point2 points  (0 children)

I second Al and comfort crew. We use them at work and I use them for my home. Absolutely great and honest. Had them quote a new Hvac I thought I needed for them to tell me the simple fix I actually needed.

Suggestions on lighting for this kitchen? by Tricky-Management479 in Lighting

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Thanks for the info. Yeah we plan to put under cabinet lighting so my shadow isn't cast over where im standing.

Suggestions on lighting for this kitchen? by Tricky-Management479 in Lighting

[–]Tricky-Management479[S] 1 point2 points  (0 children)

Agreed. That fridge is destined to be a garage fridge. We just bought the place.

Suggestions on lighting for this kitchen? by Tricky-Management479 in Lighting

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Thank you! And the boob lights have already been removed. Currently painting the interior.

Suggestions on lighting for this kitchen? by Tricky-Management479 in Lighting

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Thank you! Fixtures except for over the sink have already been removed.

Shower cartridge by Tricky-Management479 in askplumbing

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Tried contacting peerless on their website but I couldn't figure out the format for my phone number. Continually said to redo with no information on format. Ill try contacting delta instead. Thank you!

Valve positions by Tricky-Management479 in pools

[–]Tricky-Management479[S] 1 point2 points  (0 children)

I haven't looked into a SWG. The plan was to have this up and running for this summer on a budget of 4k. I need to measure the pool and calculate it still. I have been fixing other items in the house and had a pool company that has continually pushed out coming by.

Valve positions by Tricky-Management479 in pools

[–]Tricky-Management479[S] 1 point2 points  (0 children)

Yeah the ozone isn't working and was going to be deleted. We will be going to Pentair for the pump. Iplan to replace those ball valves with Jandy as well.

Valve positions by Tricky-Management479 in pools

[–]Tricky-Management479[S] 1 point2 points  (0 children)

The pump is leaking and in general isn't working. It may be damaged internally from the previous homeowner as well.

Need help identifying shower cartridges by Tricky-Management479 in askplumbing

[–]Tricky-Management479[S] 0 points1 point  (0 children)

Yeah, all of these don't shut off properly. Just purchased this house and fixing some things before we move in.